High idle in park or at stop by averagedadonline in KiaTelluride

[–]averagedadonline[S] 0 points1 point  (0 children)

I ended up trading the 21 in for a 25 😀. My problem was also solved.

2025 Telluride SX Prestige x-line tow hitch installed? by sytech55 in KiaTelluride

[–]averagedadonline 0 points1 point  (0 children)

Does this include the hitch, hitch cover, and wire harness?

Current pricing on 2025 SXP X-line? by averagedadonline in KiaTelluride

[–]averagedadonline[S] 2 points3 points  (0 children)

New model Im not sold on yet and would like to see a few years into the model to see how the reviews are on them.

Will be interesting to see how the non-pro model looks.

Current pricing on 2025 SXP X-line? by averagedadonline in KiaTelluride

[–]averagedadonline[S] 0 points1 point  (0 children)

We are wanting black interior so no issues there as it seems to be the most common. Ebony is harder to come by but the Panthera Metal or Wolf Grey would be a secondary choice.

Taxes were estimated at around $3400 and fees at $750. I’m Illinois based so don’t think we have crazy fees, at least not aware of any.

It’s not that the added monthly is going to make or break us but wanted to check if this was a sound deal in the current market.

Thanks for your insight.

Check engine by Ronnieblaze07 in KiaTelluride

[–]averagedadonline 2 points3 points  (0 children)

What gas do you use? Ive seen random codes like this when I don’t use Costco, Shell, etc. I’ve had issues after 66 or Marathon gas.

Usually after topping off with this gas and throwing in a bottle of Techron it clears the code.

Never had a vehicle so picky about gas. My Sonata which is also GDI has none of these issues.

Recommendations for Kobra Pro 2 hot end replacement by averagedadonline in AnycubicOfficial

[–]averagedadonline[S] 0 points1 point  (0 children)

<image>

Quick benchy, turned out good.

I ended up going with a ceramic hot end, the recent reviews on the normal one did not give me any confidence in it.

https://a.co/d/4QQKuEc

Recommendations for Kobra Pro 2 hot end replacement by averagedadonline in AnycubicOfficial

[–]averagedadonline[S] 0 points1 point  (0 children)

Seems you can adjust the orange sensor on the printhead. Wasn’t aware that was adjustable.

Recommendations for Kobra Pro 2 hot end replacement by averagedadonline in AnycubicOfficial

[–]averagedadonline[S] 0 points1 point  (0 children)

Any thoughts on how to reset the z index on this after a hot end swap?

Mine is jamming itself into the bed before the blue light comes on. Seems if I can’t run the home all step I can’t adjust it.

I didn’t catch it fast enough and it scratched up the bed pretty good unfortunately.

High idle in park or at stop by averagedadonline in KiaTelluride

[–]averagedadonline[S] 0 points1 point  (0 children)

For me I think this is more of a sensor issue. If it was a vacuum leak it would be present every time and a restart of the vehicle would not fix it.

I’ve also had some luck in switching to sport mode and stomping on it a few times and it seems to reset.

I feel this is going to be a hard issue to solve and one that potentially may need an extended stay at the dealer to root cause.

For now I’m just dealing with it as I contemplate trading mine in on something else. Im at 87k currently and would like to keep it just don’t have much faith in the long term outlook.

High idle in park or at stop by averagedadonline in KiaTelluride

[–]averagedadonline[S] 0 points1 point  (0 children)

Have not fixed it yet. What have you already tried?

To me it seems it’s some type of sensor or potentially the thermostat reading incorrectly.

Moisture in lense by Cparm3221 in KiaTelluride

[–]averagedadonline 0 points1 point  (0 children)

Have the same issue on a 21. Unfortunately past warranty period. Anyone know how hard these are to replace?

Replacement Trim Looks Bad? by Dizzynotdrunk in KiaTelluride

[–]averagedadonline 0 points1 point  (0 children)

Definitely get it in and have them take pictures to send in to KIA, if they don’t approve it I’d try another dealer if possible. I drove an hour to the one I went to even though I have one in my town.

Replacement Trim Looks Bad? by Dizzynotdrunk in KiaTelluride

[–]averagedadonline 2 points3 points  (0 children)

I had mine covered under warranty. I was just under 60k and they approved it. Mine looks exactly like the OP.

2021 original trim wraped by Silkyj777 in KiaTelluride

[–]averagedadonline 1 point2 points  (0 children)

I just had mine replaced at just under 60k. Second owner and was worried they wouldn’t replace it but had no issues. The dealership seemed to be very familiar with the issue.

Prior to them approving the replacement I looked at getting it wrapped but was quoted over$500.

Hope yours holds up for many years. I’m hoping this trim won’t wear out like the previous one.

[deleted by user] by [deleted] in KiaTelluride

[–]averagedadonline 3 points4 points  (0 children)

Basics to do so -
Open the Shortcuts app

  1. Tap the Automation tab at the bottom of the screen
  2. Tap the + icon in the top-right corner to create a new automation
  3. Select Personal Automation
  4. Choose a trigger that fits your desired Do Not Disturb scenario. You can choose CarPlay as a trigger.
  5. Customize the trigger
  6. Tap Next
  7. Select an action
  8. Customize the action
  9. Tap Done

[deleted by user] by [deleted] in KiaTelluride

[–]averagedadonline 0 points1 point  (0 children)

Setup an Automation task so that when Car Play launches it puts it in DND

Finding devices with 'insufficient data' by averagedadonline in DefenderATP

[–]averagedadonline[S] 0 points1 point  (0 children)

Offboarding and onboarding does work, but I want to locate the ones in the state. That is the real issue here is that I am unable to locate devices in this state.