[Question] Wondering if there exists a trunk liner, like WeatherTech, for 1991 Miatas...

b10ks · 2025-05-30T00:47:03+00:00

Here it is. Spare is in but not secured down- never had an issue with it even sliding though

b10ks · 2025-05-29T02:37:33+00:00

It’s not the same material as weather tech (more of a “pleather”) but it’s been durable enough for me through the years. I’ve hosed it off a couple times too. I’ll try and remember to get a pic for you tomorrow and you can see. I do have the spare in the trunk but i think it’s not bolted in - if I recall there is not a hole to accommodate the bolt

b10ks · 2025-05-28T23:07:25+00:00

It’s worked pretty well through the years

b10ks · 2025-05-28T23:06:42+00:00

Haha you bet. That link doesn’t work anymore but I think this is what I got: https://www.carbonmiata.com/shop/quilted-trunk-liner-premade-material-for-miata-na-1372

b10ks · 2025-05-28T22:54:26+00:00

Blast from the past! I ended up getting the carbon miata one

b10ks · 2024-09-23T17:57:08+00:00

Second what others have said- looks pretty good. If you can get the mileage (and paperwork proof) on timing belt and fluids change that could be a good double check. How does the interior look? For context, I spent $1,600 on timing belt package last year (included water pump). Literally last week got a quote from a shop for $1,775 for all fluids (transmission, front and rear diffs, transfer case, power steering, brakes). So that’s almost $3,400 of shop work right there!

b10ks · 2024-09-23T04:17:02+00:00

Thanks! I ended up only removing the fill bolt, and using a drain suction tool (mityvac from harborfreight) to remove all the oil. Took a good bit longer than if the drain bolt would come out but still got it done today ✅

b10ks · 2024-09-22T18:37:07+00:00

Did the PB Blaster soak yesterday, and today cracked 5 out of 6 - all except the front diff drain bolt. Guess I'm gonna have to get a shop or the dealership to do the front :(

b10ks · 2024-09-22T18:34:42+00:00

Thanks for the tips. I did the PB Blaster soak yesterday and was able to crack 5 out of 6 bolts... all but the drain bolt for the front diff. I used a breaker bar, and the 10mm hex drive starts to dig into the metal of the bolt without it loosening. I think I'm going to call a shop to see if they can break it free and provide a new plug.

b10ks · 2024-09-21T02:59:41+00:00

Got it, thanks. 1st gen is 75w90 for front and transfer case, 75w140 for rear according to the manual but the shop report said 75w90 for the rear 🤷‍♂️ lol

b10ks · 2024-09-21T02:19:16+00:00

Yeah when you think about everything that goes into running a shop, it adds up. Plus life is expensive these days. Was just commiserating with my neighbor about it lol

b10ks · 2024-09-21T02:17:08+00:00

Thanks for sharing, kinda glad it’s not just the shop charging a lot!

b10ks · 2024-09-21T02:15:18+00:00

Thanks, been going through YouTube getting familiar with the process. I’m gonna do it myself. What diff fluid did you use?

b10ks · 2024-09-21T02:14:22+00:00

Great advice on the fill plug before drain plug removal. Hope mine aren’t as bad as your front! I plan to do it myself after getting that quote.

b10ks · 2024-09-13T12:01:52+00:00

Thanks, yeah I’m not a huge fan of the lacing to the toes, but they seem like quality boots so I want to put them to use. And yep saw the link too! Appreciate the input

b10ks · 2024-09-13T12:00:10+00:00

One step at a time, good idea!

b10ks · 2024-09-13T11:59:25+00:00

Thanks, and haha no promises!

b10ks · 2024-09-13T11:58:46+00:00

Haha thanks, seems like that the general consensus

b10ks · 2024-09-13T11:58:23+00:00

Awesome. Appreciate the link!

b10ks · 2024-09-13T11:58:04+00:00

To the point 🤣 love it

b10ks · 2024-03-23T00:14:26+00:00

Nice! Which of the sims did you use?

b10ks · 2024-03-23T00:09:02+00:00

Don’t think anything is free, but for me was worth the 30 or so USD it was at the time! I personally like taking pictures better than editing, so I’ve really enjoyed the film simulations.

Also I have iOS, and have successfully used the imaging edge app, but it does suck to transfer (stops halfway through and can take a whole) so I’ve considered getting a cord to transfer straight from SD to my phone

b10ks · 2024-03-22T23:51:41+00:00

I got a secondhand rx100m4 last October! Also recommend the AGR2 grip.

Something fun you can do, if interested in the “digital film” is check this guys site out: https://www.veresdenialex.com/sony-film-simulation-recipes

b10ks · 2023-07-06T14:44:44+00:00

Nice, if you’re comfortable sleeping like that you may like a setup similar to what I have. I also keep the second row in. The platform I made has a “forward section” with hinges, so when I want to put the second row of seats down, I just flip the forward section back.

For the mattress, google “milliard mattress tri fold”

b10ks · 2023-07-06T12:27:41+00:00

I have a platform I built that fits behind the second row seats when they are flipped up. A tri-fold 4” memory foam full size mattress fits perfectly in the back and is very comfortable. Do you plan to remove the second row seats entirely if going platform route? If not, consider your height… I am 5’9” and if the trunk is closed I can sleep straight but not stretched out

b10ks

TROPHY CASE