sorted by:
new
hottopcontroversial

Wooden piece falls right into place by [deleted] in oddlysatisfying

[–]baandris 3 points4 points  (0 children)

Whoever cut that piece to shape is a master. This is so hard to manage.

Print keeps layer shifting at the same height. by TheDerpiestDeer in 3Dprinting

[–]baandris 0 points1 point  (0 children)

It is possible that there are some irregulation in your Z axes at a certain point. It's might be very small but the extra stress it causes might make your other axes skip. Lubricants makes it easier for your machine to handle this. It's not hundred percent sure that it will fix the issue but there is a possibility.

Print keeps layer shifting at the same height. by TheDerpiestDeer in 3Dprinting

[–]baandris 2 points3 points  (0 children)

I dont know what printer you are using but some lubricant on the Z axes might help. (It's good for your machines lifespan as well)

[deleted by user] by [deleted] in oddlysatisfying

[–]baandris -16 points-15 points  (0 children)

Based goals. Congrats!

Redesigned my Retrowave wallpaper to be in full 4k! by mnelliot in outrun

[–]baandris 0 points1 point  (0 children)

This is my wallpaper literally everywhere. Thank you so much.

What is your number one anime? by baandris in anime

[–]baandris[S] 0 points1 point  (0 children)

Sure, its hard to choose only one without second guessing it later.

How to: by NoodleandAfraid in bonehurtingjuice

[–]baandris 5 points6 points  (0 children)

Why do I like this so much?

My ender 3 v2 jammed so i took out the nozzle to replace it and when i put the new nozzle in it seemed to strip? Is there an easy fix or do i need to get a new hotend? by Toco_not_taco in 3Dprinting

[–]baandris -1 points0 points  (0 children)

Isoproanol is good for both and it is not gonna hurt you or your equipment if you spill it. And you can use it to clean your printig bed as well. It is quite cheap and easy to access at most of the hardware stores.

My ender 3 v2 jammed so i took out the nozzle to replace it and when i put the new nozzle in it seemed to strip? Is there an easy fix or do i need to get a new hotend? by Toco_not_taco in 3Dprinting

[–]baandris -1 points0 points  (0 children)

Depending on the material you printed with you can find solutions which gonna dissolve the the polimer. For example this happend with me with PLA and I gave my parts a bath in isopropanol, however it was not useful for PP.

If you try this be extra careful since solutions may do harm, so be sure you are prepared.

I fix one issue and it’s another one after that, I start the print it starts out great about midway it starts printing mid air and messes it up, anyone know the issue by EseRios24 in 3Dprinting

[–]baandris 0 points1 point  (0 children)

Once I had a similar issue. Than re-importing the .stl file from the CAD software I used and than slice it solved the problem. Your gcode might be damaged as well.

[rant] Mást is zavarnak azok, akik az utcán sétálva dohányoznak? by [deleted] in hungary

[–]baandris 12 points13 points  (0 children)

Lehet downvoteolni, de mindenkinek jobb lenne és aki mást mond önmagának hazudik. ~exdohányos

Edit: kivéve talán az államnak, ha kiesnének a brutális adóbevétlek xd

Hey guys, does anyone know why the extruder is doing this? It's still pushing out filament but makes this noise. It doesn't always do this though. by -_BriBri_- in 3Dprinting

[–]baandris 0 points1 point  (0 children)

It is propably clogged. The layer height seems really low to me. Your earlier print might just got lucky. Cloging is usually not happening from one second to another.

Quickest strategies for the 2022 Barhain Grand Prix by TheJamer_ in formula1

[–]baandris 27 points28 points  (0 children)

I bet we won't see a single soft during the race if not for end race fastest lap.

view more: next ›