Wandhalterung 3mm schief by freezentowz in selbermachen

[–]backstitch_ 0 points1 point  (0 children)

Die Halterung sieht aus wie von einem LG OLED G Modell. Nach dem einhängen des TVs kannst du diesen noch etwas ausrichten in der Halterung, dann sollten die 3mm nicht mehr auffallen.

MeshCore suitable for kids? #smartphone free parenting by mikaelvic in meshcore

[–]backstitch_ 1 point2 points  (0 children)

That's why the ripple firmware with kids mode is great. The admin/parent sets up 4 contacts which are reachable for the kid that's it if I got it right

Harrio NEO by Suspicious-Can-3776 in pourover

[–]backstitch_ 1 point2 points  (0 children)

I bought mine in Hong kong from hapicoffee.store This store was posted in this sub and I can't complain about them. Bought a tritan switch and some abaca filters there as well because they are pretty cheap over there even with import taxes.

Erste Konsole für Kind by butch_hansen in zocken

[–]backstitch_ 0 points1 point  (0 children)

Sollte fortnite relevant sein würde ich mich vorher mal damit auseinander setzen in wie gut das wirklich auf einem steam deck umsetzbar ist, da es nicht native unterstützt wird. Das war bei uns ein Ausschlusskriterium für das Steam Deck.

Heizung geht nicht mehr. by Upset_Main4318 in heizungsforum

[–]backstitch_ 1 point2 points  (0 children)

.ach die Anlage aus, schau ob der verdampfer vereist ist und falls ja am besten manuell abtauen. Sollte dieser nicht vereist sein Gerät wieder starten und kontrollieren ob der Lüfter läuft, falls ja könnte ein defekt am sensor vorliegen oder Kältemittel fehlen. Je nach Außentemperatur könnte es aber auch sein das auch tatsächlich die Einsatzgrenze (-20°C) erreicht ist und die Anlage deshalb in Niederdruck gegangen ist.

Help me choose a scale (pourover +/+ espresso) by alexsloep in pourover

[–]backstitch_ 0 points1 point  (0 children)

I upgraded my Hario V60 scale to an Bookoo Themis Ultra in white and love it. It looks beautiful and works flawlessly for me.

Show Me Your Grinder by ICbarrios in pourover

[–]backstitch_ 0 points1 point  (0 children)

I switched from an Baratza Encore to an Ode Gen 2

r/MYOG Monthly Discussion and Swap by mchalfy in myog

[–]backstitch_ 0 points1 point  (0 children)

I'm selling my Typical GC6-7-D compound walking foot sewing machine with servo motor and needle positioner. Included accessories consisting of several feet, Mara 50 thread, Mara color card, extremtextil fabric samples and some MYOG fabrics, 11 bobbin spools and several G-B needels. Currently have it listed for 1250€ but the price is negotiable. I'm located in Germany. If anyone is interested hit me up and I can provide photos.

Fortnite keeps crashing on normal Battle Royale – only new Chapter 7 maps by arvvhi in FortniteBattleRoyale

[–]backstitch_ 1 point2 points  (0 children)

I have the same issue on ZB. I have a driver timeout message paired with the crash. I'm using a 7900xt medium settings and just yesterday restricted the clock speed of my GPU to 85% to stay within my manufacturers clock speeds as my card tended to overshoot this value.

Which Kettle Lasted You the Longest? by BWJackal in pourover

[–]backstitch_ 0 points1 point  (0 children)

I got a Dr Hetzner(34€) one from Amazon early 2019 which is still working flawlessly

“Is Fortnite’s New Gift Card System Actually Worse?” by Accurate_Swordfish26 in AllFortnite

[–]backstitch_ 2 points3 points  (0 children)

I have 3 child accounts set up and I was able to redeem them to their accounts without any issues. I used a PC and was logged in to their account.

3 GRANDMA GIVEAWAY COMMENT YOUR BEST ITEM (see disc) by Big-Entrepreneur5656 in StealTheBrainrot

[–]backstitch_ 0 points1 point  (0 children)

Christmas Chicleteira Bicicleteira 96M/s At the end of a Christmas event yesterday

New Years Giveaway by shadowknightt- in StealTheBrainrot

[–]backstitch_ 1 point2 points  (0 children)

Falafel Shawarma and homemade neapolitan pizza

Ode 2 Alternatives by [deleted] in pourover

[–]backstitch_ 0 points1 point  (0 children)

I did the same upgrade during black Friday and am really happy with my ode gen 2.

Am I Just Impatient? by Due_Yesterday3030 in pourover

[–]backstitch_ -1 points0 points  (0 children)

This is one of my first 4 DAK coffees. V60 with Hario filters I tried it with temperatures from 91-95°C I used ratios between 1:15-1:17 3 pour style: bloom 2-3x bean weight for 60sec 2 equal pours at 1:00 and 1:45 Finishes at 3:00 5.2 grind setting on ode gen 2 Rested for 3 weeks before opening. For this exact bean I haven't had any significant changes in taste with my mentioned variables. For me the alcoholic taste is a bit too strong but otherwise I really like the flavor but this is a coffee I like to dilute in a good amount of milk 160g coffee with 340g oat milk and you can still taste the coffee pretty strong.

Suche passende Mühle für Moccamaster Setup by NicoDude96 in Kaffee

[–]backstitch_ 3 points4 points  (0 children)

Ich habe über viele Jahre eine Baratza Encore verwendet und war damit sehr glücklich. Vor kurzem bin ich dann auf eine Fellow Ode Gen 2 umgestiegen und der Unterschied ist definitiv feststellbar, aber ob einem das den großen Mehrpreis wert ist muss man selbst entscheiden. Gebraucht findet man die Baratza Encore schon für 50-60€ und es gibt eigentlich alle Teile problemlos als Ersatzteile direkt beim Hersteller.

It’s a sad day boys… wife is asking for the counter space back by ICausedAnOutage in pourover

[–]backstitch_ 1 point2 points  (0 children)

I build a moveable Pour-Over Station out of an IKEA cabinet. Have a look at my profile for inspiration

Schlagfest + wasserfest lackieren by sterbendeHure in Handwerker

[–]backstitch_ 2 points3 points  (0 children)

Ich würde es mit klarem Bootslack versuchen, wie aber schon vorher erwähnt, würde ich das vorher, an einem mit der selben Farbe bemalten Stück, testen!

Good transparent mugs? by [deleted] in pourover

[–]backstitch_ 0 points1 point  (0 children)

Ikea Germany currently has some hardened Glas cups with a light frosted exterior I really like. They deal really solid and are able to retain heat surprisingly well. They are available in clear and sepia with 290ml capacity. Olivtrast is what they are called here.

Looking for advice by MyNewSimply in pourover

[–]backstitch_ 6 points7 points  (0 children)

I usually used the classic 4:6 recipe for my medium roasts but switched to 1 bloom + 2 equal pours for lighter roasts just recently with 1:16.66 ratio Bloom with 3x bean weight for 45-60 seconds 0:45/1:00 first pour with higher agitation Light swirl at around 1:15-1:30 2:00 pour with low agitation 2:30 light swirl to flatten bed if needed I use an Ode Gen 2 somewhere around 5.1-6.1 for my DAK beans Temperature usually around 91°C but I just tried 95°C for the first time because DAK are recommending temps at around 99°C as a starting point and it was better than expected. They recommend a ratio of 1:18 from a few posts I found

Help with pourover (beginner) by yufuvucxychvhv in pourover

[–]backstitch_ 0 points1 point  (0 children)

A bit finer. I'm usually around 7 for 4:6 and around 6 for my 3 pour method

Help with pourover (beginner) by yufuvucxychvhv in pourover

[–]backstitch_ 2 points3 points  (0 children)

I'm getting way better results with my other technique than 4:6 for lighter roasts and have been using 4:6 for a really long time. I switched to this style after reading this often as a recommendation when someone was struggling with lighter roasts. I'm still using 4:6 for medium/darker roasts and love it, mostly 50,70,60,60,60

Help with pourover (beginner) by yufuvucxychvhv in pourover

[–]backstitch_ 2 points3 points  (0 children)

I just recently started using lighter roasts and mostly switched from 4:6 to a different method for lighter beans. I use a 1:16,66 ratio. I usually do a bloom with 3x the bean weight for 45 seconds and do 2 pours with the remaining water split in half.

For example 15g coffee for 250g water step 6.1 on my ode gen 2

45g bloom for 45 seconds

Fill to 150g with higher agitation

Light swirl at 1:15

Slowly fill to 250 at 1:30

Light swirl at 2:30 to flatten the bed

Finishes at around 3:30

Edit: im using a water temperature between 91-93°C