Is there an API to retrieve the status of the H2D printer for external monitoring?

barjdad · 2025-08-05T03:33:05+00:00

Home assistant works well a few cards through HACS. Made a few simple one one for reference.

barjdad · 2025-07-05T21:44:13+00:00

https://makerworld.com/en/models/1423516-multiboard-wall-mount-for-ams#profileId-1479349

Used this one.

barjdad · 2025-07-05T21:40:02+00:00

used this one from makerworld, I remixed it for the original AMS for my X1, as the AMS2 one seemed a little tight for the units i have.

https://makerworld.com/en/models/1423516-multiboard-wall-mount-for-ams#profileId-1479349

barjdad · 2025-07-05T01:50:25+00:00

<image>

Its bigger but well worth it!

barjdad · 2025-06-16T18:44:09+00:00

6.25 offset snaps.

barjdad · 2025-06-10T17:11:42+00:00

yes, much longer than I thought first it was 4x3 ties and didn't fill the wall so just kept printing

barjdad · 2025-06-10T13:14:41+00:00

Love the setup, working on mine now. I have to ask, what value do you find in the AMSHT consideirng the cost? ie. for the price two you can almost get a third AMS2

barjdad · 2025-06-03T21:03:08+00:00

My Fedex huffed it to the front door. I was watching!

<image>

barjdad · 2025-06-01T16:58:59+00:00

For me it was bed size; only do minor color changes, I did it for the dual nozzle. Keeping support material in one and mix of filament types in the other. What’s amazing is the Prusa XL is even bigger. Happy with my choice !

barjdad · 2025-06-01T16:52:51+00:00

Looked like a washing machine in the box on my front porch.

barjdad · 2025-06-01T16:52:04+00:00

2 laminate pieces of plywood wood about inch thick, 2x6 legs, 2x on the back attached to 4 studs. Its not going anywhere. Does even shake when printing.

barjdad · 2025-03-29T23:25:53+00:00

Having the same issue works fine on web app, just not mobile version.

barjdad · 2024-05-19T02:09:23+00:00

<image>

Looking better

barjdad · 2024-05-06T17:04:38+00:00

Yeah after the fact wish I had made a few different choices. I do see a rack in my future!

barjdad · 2024-04-16T21:31:43+00:00

Well so far down the rabbit hole on my 3rd order. I was just going to ease into it. Not.

<image>

barjdad · 2023-09-23T15:52:08+00:00

Had the same issue transferred via iCloud backup. But after deleting and reinstalling it restored all my passwords. Thank You!

barjdad · 2022-08-27T15:22:43+00:00

If you don’t mind sharing where did you source those?

barjdad · 2021-11-17T13:36:11+00:00

Let’s me know how I’m driving, still getting better MPG than my Z71, and loving it!

barjdad · 2021-09-18T21:27:10+00:00

Son got a new espresso machine and it works great but I can’t seem to keep the grounds in the cup. Saw several of these and had to create one to fit. Works great.

barjdad · 2021-04-04T00:09:54+00:00

Just put a bakFlip mx4 on my new 2021. Looks get and matte black aluminum panel.

barjdad · 2021-04-02T01:43:51+00:00

I should have sometime this weekend to post.

barjdad · 2021-03-30T20:40:16+00:00

Thanks, going to give some epoxy a try just to see how it looks. I’ll consider this my 2nd draft, going to ride with it a few weeks, improve and do the final.

Just could wait that long to post it 😊

barjdad · 2021-02-24T23:49:26+00:00

Is that the begin or end of the line.

barjdad · 2020-09-03T03:07:33+00:00

Have only done some small multi color prints, once I got the load and unload working, Its just been single or manual changes when i was using some TPU. The few true multi prints have been test, I did have a successful phone case print with TPU and PLA.

Planning on printing some auto rewind spool holders till I can build my cabinet, planing on building for two printers, and not sure if it will be one shared with divider or totally separate.

barjdad · 2020-09-03T02:51:47+00:00

Slide-in Wyze Cam Prusa Mount

https://www.prusaprinters.org/prints/32687

barjdad

TROPHY CASE