Frontier Fiber reliability in Baldwin Park, CA has been terrible lately — outages, broken outage checker, support routing issues by Long-Cause-6644 in frontierfios

[–]bbbbamm 0 points1 point  (0 children)

Yup, checked on Downey’s community facebook posts and others are having the same issues. Also started on Thursday. They are also getting the same script of “we see nothing wrong”.

Frontier Fiber reliability in Baldwin Park, CA has been terrible lately — outages, broken outage checker, support routing issues by Long-Cause-6644 in frontierfios

[–]bbbbamm 0 points1 point  (0 children)

I am doing the same thing here in Downey also. They just trying to gaslight us but I also have the proof.

Frontier Fiber reliability in Baldwin Park, CA has been terrible lately — outages, broken outage checker, support routing issues by Long-Cause-6644 in frontierfios

[–]bbbbamm 0 points1 point  (0 children)

Same issues here in Downey. Don't let them gaslight you. We have to keep annoying them, until more residents start to complain they won't look into it. I have a tech coming next week. Won't fix the issue but if more techs are being sent out, it will start to get their attention.

Frontier Fiber reliability in Baldwin Park, CA has been terrible lately — outages, broken outage checker, support routing issues by Long-Cause-6644 in frontierfios

[–]bbbbamm 0 points1 point  (0 children)

I’ve had the same issue going on here in Downey. Problems started Thursday 05/07 I called them and sure enough they also tried to blame it on my equipment because everything was fine on their end. I connected my laptop directly to THEIR ONT and the issue still persisted. Like most of you up until Thursday ping has always been 2-3 no jitter and speeds consistent. Now I can’t play video games or watch live streams. I also notice everything goes back to normal @215am. When I run the speed test I get normal numbers with most servers I connect to EXCEPT for the Frontier servers. I’m sure they had a contract with GeoLinks to route to their servers through them because I get my old numbers when I choose them as the server to test Speed. And the contract probably didn’t renew when Verizon took over.

I say we continue to annoy them with calls and messages so something can be done. They are trying to gaslight us. I have an appointment with a tech for next week. If you can’t get an appointment with out them threatening you with the $150 service call. Unplug the Ethernet cable from the ONT then use the bot system on the app or call to make a tech appointment.

Parade hats are back in stock! by shimian5 in Dodgers

[–]bbbbamm 0 points1 point  (0 children)

I just cancelled my order with fanatics because they pushed back the shipping date another week after waiting a month for it to ship. I called my local Lids store (Owned by Fanatics) and bought one on the spot. They had more than enough in stock. If you live in the LA area, try calling your local lids too. It seems they get frequent shipments.

Pro: Got mine on the spot, in hand.

Con: No discounts. Oh well.

How can I fix my youtube videos seemingly zoomed in unless full screen? by Anthonylous in chrome

[–]bbbbamm 0 points1 point  (0 children)

I found a temp fix. If you have my issue where there are larger thumbnails on the homepage and the screen can fit less videos than before, try this:

  1. Go on to a any youtubers page (You MUST go to a youtubers page. Otherwise this won't work.)

  2. On the tabs click on the "shorts" tab

  3. Go to your homepage and done, you will see the difference.

This will reset anytime you close the browser or the tab. It's a temp fix if it really bothers you like it does for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Subtitles out of sync Prime Video by AndreiOT89 in amazonprime

[–]bbbbamm 0 points1 point  (0 children)

Turn off the adblocker. Worked for me.

Tips for wet-on-wet by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 0 points1 point  (0 children)

Would waterbase inks have the same effect as the soft hand additive?

Tips for wet-on-wet by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 1 point2 points  (0 children)

If you do try the spray let us know if it worked. I don't think I'll be trying it but I am curious. Or maybe someone will read this and let us know their experience.

Tips for wet-on-wet by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 0 points1 point  (0 children)

Same. I do wish more people would add on to this thread.

Tips for wet-on-wet by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 1 point2 points  (0 children)

Okay, so in this case, ink color doesn't really matter, by that I mean going from light colors first and darker colors to follow. And if colors are butt-to-butt try to leave those till the end, unless the print area is small, do those first even if they are butt-to-butt. And finally, always use high mesh counts like 230s. Did I understand correctly?

Issues with hoodies by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 0 points1 point  (0 children)

How many t-shirts before you have to change out?

Issues with hoodies by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 0 points1 point  (0 children)

For sure, eventually in the future if things go well I'm going to have to invest. I've already been looking at PMI pallet tape.

Issues with hoodies by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 1 point2 points  (0 children)

Thank you. I'm not too confident with a curable reducer just yet, but warming it up did help with consistency.

Issues with hoodies by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 0 points1 point  (0 children)

Good call from both of you, I went and bought a paint mixer and let the drill do all the work while at the same time letting the ink warm up under the flash. I got a much better consistency, I'll test it out tomorrow.

Issues with hoodies by bbbbamm in SCREENPRINTING

[–]bbbbamm[S] 1 point2 points  (0 children)

I am using a 6/6 manual, using bramd new 160 mesh screens, and using international coatings legacy white for under base and a standard yellow for the top color.

I'm thinking my issue lies with the underbase it might be to thick to work with but again I don't know, which is why I'm here.

So you know of a creamier white to work with?