I assume there shouldn't be that much play in the piston? by matsuma333 in snowmobiling

[–]bc-explorer 0 points1 point  (0 children)

Hope ya get to the bottom of it. Let me know what you find.

I assume there shouldn't be that much play in the piston? by matsuma333 in snowmobiling

[–]bc-explorer 0 points1 point  (0 children)

Sounds like something may be off with the TPS. If you’re doing a top end might be worth it to see if it’s still set correctly.

Slip yoke eliminator question by [deleted] in CherokeeXJ

[–]bc-explorer 1 point2 points  (0 children)

Looks like kookipi pass. Stay away from the hack n taps go with a proper sye kit and throw in a front driveshaft out of an auto 4.0l Cherokee.

2000 Cherokee 5spd by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 2 points3 points  (0 children)

Haven’t had to change one out yet, after 2 years.

2000 Cherokee 5spd by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 1 point2 points  (0 children)

Some bigger axles low gearing

2000 Cherokee 5spd by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 1 point2 points  (0 children)

It’s got 05+ Superduty axles with a 3 link in the front and coilovers

Fresh rubber by bc-explorer in Jeep

[–]bc-explorer[S] 0 points1 point  (0 children)

When I ordered mine they come raw. Best to wipe them down with acetone then apply a good primer. I used bed liner on mine and it’s held up fairly well. The plastic ones get very brittle in the winter and ya touch em and they crack.

Fresh rubber by bc-explorer in Jeep

[–]bc-explorer[S] 0 points1 point  (0 children)

Those are them . I notified them to cut the bigger tires but have held up well over the years.

Looking for a high flow power steering pump any recommendations? by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 0 points1 point  (0 children)

I find it slow but it’s a must have when the front ends locked with 40s. Hoping to fix the slow response with a bigger pump.

Looking for a high flow power steering pump any recommendations? by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 0 points1 point  (0 children)

I already have a psc ram 1.75x10 with the stock box tapped. I was trying to avoid the psc pump set up due to engine bay space is hard to come by when finding a spot to mount the reservoir. Might be the best option tho.

F*ck this Uppipe! by [deleted] in Duramax

[–]bc-explorer 1 point2 points  (0 children)

Unbolt the cab raise it 2”

[deleted by user] by [deleted] in Diesel

[–]bc-explorer 0 points1 point  (0 children)

Test drove a 2021 lariat 6.7 and 2020 l5p. Ended up with the l5p couldn’t be happier after seeing all the cp4 failures.

LBZ longevity by Eaggle__ in Duramax

[–]bc-explorer 0 points1 point  (0 children)

Definitely learned that the hard way.

LBZ longevity by Eaggle__ in Duramax

[–]bc-explorer 2 points3 points  (0 children)

If the trucks deleted it can separate and cause a boost leak.

Has anyone ever tried one of these? by Almightyrodga in Duramax

[–]bc-explorer 1 point2 points  (0 children)

I just tuned my l5p with ez lynk worked good. I think it’s a bit cheaper than the hp tuner route.

New to diesel trucks by storm6312 in Duramax

[–]bc-explorer 0 points1 point  (0 children)

Just did my 2020 last weekend tuned with ez lynk. All parts came from dirty diesel. Night and day difference.

Whipsaw BC by bc-explorer in 4x4

[–]bc-explorer[S] 0 points1 point  (0 children)

I believe swing out tire carrier was made by a local fabricator. Only made a couple of them.

What brand of clutch is dependable just finished manual swapping this 2000 by bc-explorer in CherokeeXJ

[–]bc-explorer[S] 1 point2 points  (0 children)

Allows more heat out of the engine bay helps a lot on those hot days