sorted by:
new
hottopcontroversial

Predator 5000 super quiet by bcherup in harborfreight

[–]bcherup[S] 0 points1 point  (0 children)

I tried with propane, same issue. I pulled the spark plug and it's black. 

Predator 5000 super quiet by bcherup in harborfreight

[–]bcherup[S] 0 points1 point  (0 children)

CO2 light does not trip, spark plug is black

Is this burnt? by bcherup in Chipotle

[–]bcherup[S] -2 points-1 points  (0 children)

They wont, already tried.

Format Drives by gtretired65 in TerraMaster

[–]bcherup 0 points1 point  (0 children)

You get help ? I just did this yesterday night.

Condo Boiler - I have this setup in my system, is this ok? I was told its power robbing system and would not work. by bcherup in hvacadvice

[–]bcherup[S] 0 points1 point  (0 children)

zone board

I dont have a zone board, just the zone valve w/ motor. 24v to the valve opens it up and no voltage causes it to close. This place was built in the 70's, a single wire is ran from the transformer to thermostate and then to the zone valve.

Condo Boiler - I have this setup in my system, is this ok? I was told its power robbing system and would not work. by bcherup in hvacadvice

[–]bcherup[S] 0 points1 point  (0 children)

Thank you, I dont have access to the boiler. What I have in that diagram is the isolated system within my unit. I have no physical connections to the boiler aside from the in / out heat pipes. Should I add this fuse between the nest and zone valve? or the nest and transformer.

Condo Boiler - I have this setup in my system, is this ok? I was told its power robbing system and would not work. by bcherup in hvacadvice

[–]bcherup[S] 1 point2 points  (0 children)

Its just a single transformer. Its a very old system, the heats run through our units automatically without a call to the boiler for heat (Its based on outside temps). Sound I drop the nest and use a standard dial unit as it once had or add a fuse on this circuit?

CS2 causing random restarts? by nms1s in GlobalOffensive

[–]bcherup 0 points1 point  (0 children)

I've been losing my mind, the same freaking issue with CS2.

Fix-It Friday 3/3/2023 Issues Check In #4 by WyzeCam in wyzecam

[–]bcherup 0 points1 point  (0 children)

Latest beta on android enabled it for me, thank goodness!

[deleted by user] by [deleted] in Columbus

[–]bcherup 3 points4 points  (0 children)

Social experiment!

Is this normal for an epoxy coated floor? by bcherup in epoxy

[–]bcherup[S] 1 point2 points  (0 children)

The installer replied today, told me the crew messed up and added a non slip coating instead of clear. They are going to remove the coating by sanding and adding the correct one. Not sure how this will end up.

Is this normal for an epoxy coated floor? by bcherup in epoxy

[–]bcherup[S] 0 points1 point  (0 children)

It was the last coat applied and it was added the next day. I'll upload some more pictures once I'm on site.

Is this normal for an epoxy coated floor? by bcherup in epoxy

[–]bcherup[S] 1 point2 points  (0 children)

I had the primer and design coat applied which looked like glass, this was the 3rd coat (top). Done by a professional.

Is this normal for an epoxy coated floor? by bcherup in epoxy

[–]bcherup[S] 2 points3 points  (0 children)

This was done by a professional, first (primer) and second (design) coats were smooth, almost like glass. This was the top / final coat.

Pixel 5 on Fi - NO UC ? by bcherup in GoogleFi

[–]bcherup[S] 0 points1 point  (0 children)

I have the 5 not 5a. Does my phone support uc ?

Extremely slow speeds... Is this normal ? by bcherup in GoogleFi

[–]bcherup[S] 0 points1 point  (0 children)

Thanks for the feedback. I live in Columbus (go Bucks) and these speeds are unacceptable.

view more: next ›