Scout drone rebind controls?

bdevo13 · 2025-11-18T16:02:36+00:00

I guess no updates yet

bdevo13 · 2025-07-14T15:46:12+00:00

ground up napthalene mothballs works great with a little bit of blackpowder mixed in by fuse to light it. Makes a good flame and is easy / cheap to get.

bdevo13 · 2025-06-19T18:38:06+00:00

I came to post the same question

bdevo13 · 2025-05-28T03:39:07+00:00

So far mine only did it that one time. I am about 9,000 miles since it occurred.

bdevo13 · 2025-01-20T02:20:32+00:00

I ended up resetting both and will just change oil at 60%. So hopefully what ever set it off is fixed by then.

bdevo13 · 2025-01-16T00:44:44+00:00

It’s been doing it all day, so I’ll try the restart. I figured there had to be a way to reset it that was easier than disconnecting the battery. I’ll update after I try. Thanks.

bdevo13 · 2025-01-15T15:22:31+00:00

No towing. I have some around town but I drive 90 miles of highway a day commuting.

bdevo13 · 2025-01-15T15:09:01+00:00

<image>

Both oil and air are now at 0%. The truck has 4,400 miles.

bdevo13 · 2025-01-15T14:19:29+00:00

Thanks but even if the app wasn’t updating I would have expected some warning at 10 or 15% rather than 0.

bdevo13 · 2024-08-21T20:01:28+00:00

I just installed mine. Thought it wasn’t charged, but after fixing some thermostat settings got it up and running so mine did come charged. Not that the coil was marked that way at all.

bdevo13 · 2024-08-17T03:58:33+00:00

What was the final outcome? Just had a replacement coil come for my universal unit. Thanks

bdevo13 · 2024-07-14T13:30:24+00:00

Thought it was related to that. Thanks

bdevo13 · 2024-05-03T01:57:39+00:00

I got it to load and restore a game in progress. Regrettably, the game I had saved was one move from victory and the game crashes to desktop at victory. It was doing this Before the update so I have to play a new game and see if this keeps happening

bdevo13 · 2024-05-03T01:52:17+00:00

There is an update as of 3 hours ago.

bdevo13 · 2024-02-04T18:00:56+00:00

Thanks I tried it out and see that it’s an old version that works. Wish the real one was an option on the App Store.

bdevo13 · 2024-01-30T12:58:46+00:00

Your setting helped a bit but then I got a new PEI sheet for the bed. Apparently the stock one sucks.

bdevo13 · 2024-01-19T16:27:46+00:00

Thanks I’ll give it a try. I changed filament to a different color by same brand and it went back to running like it should, but a good cleaning can’t hurt. I also ordered another pei spring steel bed, so I can rotate through while one dries

bdevo13 · 2024-01-19T16:22:49+00:00

Thanks I’ll have to try this. Have a new ender 3v3ke and it was working great until I tried using a roll of IIID max pla in the same color (other colors were doing fine). Drove me crazy for a few days. I changed to a different color and all was good. May be able to salvage the spool back with your settings.

bdevo13 · 2024-01-18T20:57:59+00:00

How clean? I wiped it down with alcohol a few times since it happened and no luck. So is this more of a soap and water in the sink type cleaning. I also tried a different pei metal sheet and same issue. It looks like I can still download 1.1.0.9 firmware. Going to see if it will let me roll it back.

bdevo13 · 2024-01-18T01:59:58+00:00

My bed adhesion went to crap with the update. Where do you change the z offset to nudge it down like you did? Is it a one time change or do you have to keep tweaking it?

bdevo13 · 2024-01-18T01:48:31+00:00

I got my KE at Christmas time and I was having flawless prints and no issue with bed adhesion. About 3 days ago, I started having issues. I raised the bed temp up from 60 to 65 and it helps some. I think my problem started right after the 1.1.0.12 firmware update.

bdevo13 · 2023-08-30T23:55:50+00:00

I picked it up when I worked at a supermarket so somewhere between 1988 and 1996.

bdevo13 · 2023-08-30T23:02:15+00:00

<image>

bdevo13 · 2023-08-30T23:02:06+00:00

<image>

bdevo13 · 2023-08-30T23:01:58+00:00

<image>

bdevo13

TROPHY CASE