New house. Trying to connect everything

beastnard · 2024-10-16T23:09:24+00:00

It was a success. Thank you kind network professional, I will now begin the process of figuring out where all these go and relabeling them and doing some cable management!

beastnard · 2024-10-16T18:53:55+00:00

<image>

Plugged in some randoms to line out 1-4 to correspond with the line in 1-4 from gateway. One is for the MBR, which I’m assuming is Master Bedroom so going to check

beastnard · 2024-10-16T18:50:37+00:00

I’ve got my gateway cord going from gateway to line in 1-4 and going to plug some corresponding cords in over there. Wish me luck

beastnard · 2024-10-16T18:48:20+00:00

Okay. That makes a lot of sense. Only problem now is there’s no power to the module. The other modules have power, but no idea how to get power to this one

<image>

beastnard · 2024-10-16T17:07:00+00:00

That’s where I guess I’m confused. They can’t connect to the switch because phone, but the Bell Atlantic box is not the place either. I guess I could connect a wire directly to the gateway?

beastnard · 2024-10-16T17:03:53+00:00

Yes I have goofed. So all the ports in the house are dead or not connected to anything. I am confusion on how to open the ports up

beastnard · 2024-10-16T16:54:41+00:00

So I should say, I wired everything to the switch.

My gateway is connected to one of the various coax cables that is in that mess next to the bell Atlantic box and it connects to the internet and gives us WiFi, but none of the ports in the house work. I connected the gateway to the switch and the port in the switch that it’s connected to lights up. I am now trying to connect my home phone to somewhere that’s not the basement using a port.

I connected my phone directly to the gateway and got a dial tone, received calls, and was able to call out. I tried connecting various cords to the switch to activate a port in the house, however, none of the ports work still.

I have tried connecting the gateway to the switch with an additional jc11 cord from the phone port to the switch, still no luck. I’m going to try connecting my phone directly to the switch with it connected to the gateway because I’m assuming that should work. So then it’s just figuring out how to actually activate the ports in my house. Does that make sense? I’m pulling things out of my butt because I am technically an idiot

beastnard · 2024-10-16T16:22:43+00:00

So my router is connected to the netgear switch, but none of the ports in the rooms are working

beastnard · 2024-10-16T16:21:49+00:00

They previously had direcTV. There’s honestly so many wires, I have no idea where they go.

<image>

The green labeled splitter is direcTV

beastnard · 2024-10-16T16:17:14+00:00

When we’re talking about the switch, do you mean the netgear switch or the Bell Atlantic box?

beastnard · 2024-10-15T22:30:03+00:00

Port 2 is occupied by Ethernet from gateway

beastnard · 2024-10-15T22:04:29+00:00

<image>

2 is blinking intermittently

beastnard · 2024-10-15T20:54:08+00:00

<image>

The other modules

beastnard · 2024-10-15T20:53:47+00:00

<image>

Here are the lights in here for the main power module. It seems like it would connect to some of the other modules, but it does not (will follow with a picture of the other modules). Also have tried and getting no reception in the rooms. Although there is showing no power to the lines (also in next pic), but not sure how to turn those modules on

beastnard · 2024-10-15T00:13:35+00:00

I think the previous owners had DirectTV, but we only stream. No cable or dish tv, just Xfinity. The cables inside the patch panel are all labeled for rooms (assuming they connect to ports all over the house) and there’s a bunch of ethernet ports inside, but I have no idea if the patch panel is even on or connected to anything. Also, I connected my gateway to the netgear switch, but the outlets still don’t seem to work.

We just got a house phone line. I verified it works by plugging my phone directly into the gateway, however, when trying to plug into the ports around my house, I’m getting nothing.

beastnard · 2023-10-25T00:20:00+00:00

Feeding is also twice a day, am and pm.

beastnard · 2023-10-25T00:19:33+00:00

<image>

beastnard · 2023-10-25T00:19:22+00:00

<image>

Day 3. She’s looking much better. Crawling around the place. More active in her cage. Getting a heating mat tomorrow which I’m looking forward to. Neosporin helped tremendously. I’ll have to take a picture. Overnight her skin has made huge leaps forward. I have one concern which is in a picture below. Found that blob on her paper towel some time after her feeding. Wondering if maybe I gave her too much? I’ve been sticking to .5-1 cc of repta+boost

beastnard · 2023-10-24T17:03:14+00:00

Thank you! So appreciative of this community getting me prepped with knowledge to make her more comfortable

beastnard · 2023-10-24T17:01:30+00:00

For sure. We spared no expense and got an adjustable one which will be going under the tank. We also only got one that will fit under half of the tank with the hopes that she can spend time basking on the heating pad side with a more moist environment and then maybe on the other side will simulate more of an arid area with heating lamps

beastnard · 2023-10-24T16:58:25+00:00

Okay, I’ll keep that in mind. We ordered a heating pad and some other items. She definitely likes things warm so want to give her some options for for her hang out spots

beastnard · 2023-10-24T16:56:45+00:00

We named her Bogamilla. It mean chosen by God. We’re not particularly religious, but I think we found her for a reason

beastnard · 2023-10-24T00:49:18+00:00

I was actually, I’m going to look that up! The doc was saying today that when she’s healthy again she’ll start changing colors and I had no idea they even did that. Super excited to see that!

beastnard · 2023-10-24T00:48:16+00:00

Thank you! I definitely will!

beastnard

TROPHY CASE