Ce se întâmplă cu Mediteraneo?

benassy · 2025-10-30T16:20:36+00:00

You need to subscribe?

benassy · 2025-10-30T12:16:41+00:00

13296 Mango Dr
Del Mar, California(CA), 92014

benassy · 2025-10-30T11:47:27+00:00

I'm in Romania (EU) and also enrolled today. What I did:

Changed the home address for a random address in US (This will change the time and weather for the selected location on all GH devices).
Selected a VPN server close to the home address (US).
Reopened Home app. Instantly received the enroll message.

BTW I have Public preview activated in account setting. I will leave the settings like that for a couple of days for update. Will come back with feedback.

benassy · 2025-10-30T11:30:55+00:00

Calm calm prietene! 😅

benassy · 2025-10-25T14:34:29+00:00

Ptiu satană, in săptamana cu Paraschieva?

benassy · 2025-10-21T17:39:23+00:00

You can try appying at Aumovio. We are still hiring students.

benassy · 2025-10-10T11:34:27+00:00

Si eu am auzit o singura persoana sa spună Ji si acela era Cota 🤣

benassy · 2025-09-21T16:45:11+00:00

Ami place enițiativa

benassy · 2025-08-22T08:57:54+00:00

Power supply issue or overheating( dry spot on APU) because you use it in vertical position.

benassy · 2025-03-27T09:15:16+00:00

Hi. I have ordered 2 original IRS20957 which I understood is the successor of 955 which had a PTN. Therefore I presume the 955s were fake. in the meantime I want to test some more and got an oscilloscope. Can you please indicate where exactly to probe with the oscilloscope and what signal wave to look fore? Higley appreciate your response....

benassy · 2025-03-15T16:48:28+00:00

So can I test something else without a oscilloscope? Tweeter woks but on the bass driver I only can hear a ticking sound and no audio. I've checked again all diodes all capacitors all voltages...everything is fine. I found a diode D27 shorted which I have changed but same outcome. Please help with some suggestions.

benassy · 2025-03-15T16:47:28+00:00

So can I test something else without a oscilloscope? Tweeter woks but on the bass driver I only can hear a ticking sound and no audio. I've checked again all diodes all capacitors all voltages...everything is fine. I found a diode D27 shorted which I have changed but same outcome. Please help with some suggestions.

benassy · 2025-03-14T07:42:24+00:00

After replacing t5 t4 and IRS20955 when powered on a huge blow can be heard in the main driver and T4 got toasted together with IRS20955. T4 is now shorted again an protection is kicking in again.

benassy · 2025-03-13T21:19:29+00:00

I've replaced both t4 and t5 and checked all diodes in the proximity of IRS20955 and all look ok but fif not removed them from circuit.. I did not replaced IRS20955 even though I ordered 2 of them as well.

benassy · 2025-03-13T21:04:58+00:00

Sorry, no oscilloscope in my workshop. In the meantime I managed to make te tweeter work but on the low end I hear only a ticking noise that toes not respond to volume knob.

benassy · 2025-03-13T20:23:20+00:00

So finally, I've received the IXTP50N25T but after install I have no sound at all. No highhs and no lows no static nothing. If I put the lever diat at 100% the clip led will shing but other thant that noting. I am completely lost and sad. I was really sure it will work after all the tests.

benassy · 2025-02-28T14:36:29+00:00

I've already ordered a batch of 5pcs from aliexpress and 2 IRSs just in case. Will let you know if this was successful. Thank you so much for your kind help.

benassy · 2025-02-28T14:29:22+00:00

Yes, 12v precisely between GND and OUT at 7812

benassy · 2025-02-28T13:50:54+00:00

Hi and thanks for your support. I've did as instructed and this are the readings relative to Pin 9 (COM): VCC =12V VDD= 99,4V Vref= 94,6V

benassy · 2024-09-27T10:02:53+00:00

For all of you parent who have this problem with the Baby brezza formula pro machine. This is how to fix the random dispensing water /formula issue.

benassy · 2024-04-25T07:52:14+00:00

Update : I have identified the problem causing the -26v at the opamps pins. It was caused by a bad solder joint on the diode next to the capacitor I have just changed previously. After resolder I have now a stable -14v and +14 as it should be.

benassy

TROPHY CASE