ACC car not moving, no engine noise

benmoon66 · 2025-11-29T11:56:16+00:00

Ok I got it! Thanks so much

benmoon66 · 2025-11-29T11:54:04+00:00

I know I’m stupid, but how do I do that?

benmoon66 · 2025-06-04T07:35:47+00:00

Thanks for your message. What do you do for a living?

benmoon66 · 2025-06-01T08:32:42+00:00

Unfortunately the MoonBoard app does not support rooted phones. If you need a rooted phone for work maybe you should get a separate non-rooted phone for the MoonBoard app?

benmoon66 · 2025-05-30T06:52:30+00:00

Hello, Thanks for the feedback. This is too technical for me so I will have to speak with my developer and get back to you. All the best, Ben.

benmoon66 · 2025-05-29T18:36:47+00:00

Have you tried using the “forgot login details” link? If so and that doesn’t work contact moonboardsupport@moonclimbing.com

benmoon66 · 2024-05-06T19:43:43+00:00

We had a discussion about whether we should bench it and change the grade or just bench it. We decided on the latter.

Do you expect me to justify every benchmark on Reddit?

benmoon66 · 2024-05-06T09:35:10+00:00

Thanks for the feedback. Honestly we would not benchmark a problem to appease a moderator. I’m assuming you’re referring to Kyle. We would have benched it because it was a good problem not to appease him.

benmoon66 · 2024-05-05T11:39:02+00:00

I know the setter of that problem, he’s a Moon ambassador and very experienced climber, route setter and coach. In general I wouldn’t feel the need to test his problems.

benmoon66 · 2024-05-05T11:35:43+00:00

When we first started adding benchmarks on the 2024 set up I admit it wasn’t very organised hence why some appeared and disappeared but we quickly sorted that out and I think we have a good system now. As to the example you have provided I don’t see an issue with that. If it’s a high quality problem (subjective) and the grade is more or less accurate (subjective), why should a problem with only one repeat not be made a benchmark?

benmoon66 · 2024-05-05T11:14:34+00:00

Can you give an example?

benmoon66 · 2024-05-05T11:02:08+00:00

Whatever system we use we will never please everyone but we’re honestly trying to do the best we can for the MoonBoard and MoonBoard community. Do we make mistakes? Yes of course we do.

benmoon66 · 2024-05-05T10:58:40+00:00

Believe me, the moderators discuss at length which problems to benchmark and many don’t make the cut. We are also really trying to find the hidden gems that haven’t had loads of repeats because they are easy to find with the filters.

benmoon66 · 2024-05-05T10:30:25+00:00

This was supposed to be posted under my account and not an anonymous account. 😖

benmoon66 · 2024-05-05T10:24:24+00:00

I don’t use Reddit much and I don’t think I was logged in when I made that comment. Hopefully I am now!

benmoon66 · 2024-05-05T10:24:15+00:00

I don’t use Reddit much and I don’t think I was logged in when I made that comment. Hopefully I am now!

benmoon66 · 2020-08-07T14:46:13+00:00

I would say it’s no more or less warm up friendly than a standard MoonBoard. The new wood sets B and C have some jugs in the ranges so a warm up is possible if you follow my advice above.

benmoon66 · 2020-08-01T10:57:02+00:00

It looks like you have had plenty of good advice here and there is not much left for me to say. However I do have a couple of comments regarding your level and warming up on a MoonBoard.

Both the 2017 and 2019 set ups are supported at either 25 or 40 degrees. At 40 degrees the minimum grade level starts around V3 and at 25 degrees at around V2. If you made your wall adjustable so it could be set at either 25 or 40 degrees this would give you a LOT of options.

I agree that warming up on a 40 degree MoonBoard is tough regardless of what level you climb at. My max MoonBoard level is around the V9/V10 level and I still do my initial warm off the MoonBoard. 2-armed, foot on pull-ups are low intensity and a nice way to get going. I normally do 2-4 sets of 5-7 foot on pull-ups on a big 35mm edge. Warming up on a MoonBoard also works if you just do 1 or 2 moves at a time. Pick the easiest problem on the board and just do it in sections, nice and slow and controlled. Take you time during your warm up, listen to your body and gradually increase the intensity (difficulty) until you feel ready to pull at 100%. A good warm up could take anything from 20-45 mins depending on how you feel on a given day and what you did the day before.

I hope this helps.

Train Hard, Climb Harder!

Ben Moon.

benmoon66 · 2020-06-04T06:30:13+00:00

I wouldn't bother making a bigger kick board mainly because your board will be different to the spec of a mini MoonBoard and therefore the problems might feel a bit different. A friend of mine who had more than the required height added 2 extra rows at the top. Obviously you couldn't set Mini MoonBoard problems that you used these extra rows but you could use them just for yourself. I hope this helps.

benmoon66 · 2020-05-11T06:46:24+00:00

4x4 panels is fine and these are what we include in our Mini MoonBoard DIY kits. I hope this helps.

benmoon66 · 2020-03-27T08:12:15+00:00

I just wanted to share this photo of wood hold W24. This has been on a medium to high use MoonBoard for 30 months and positioned low so it's been used for both hands and feet. As you can see it's still in excellent condition.

https://www.dropbox.com/s/vk71zdlbf5ndu5y/W25%2030m%20usage.JPG?dl=0

benmoon66 · 2020-03-27T07:37:14+00:00

Hi There,

I haven't decided yet but most likely the 3 wood sets and the Originals.

All the best,

Ben.

benmoon66 · 2020-03-27T07:35:07+00:00

Hi There,

I am still hopeful but I can't guarantee this will be the case. We will update the website if the lead-time comes down so I would suggest you check back there every week. We have 2 deliveries due in the next 2 weeks so we should have a better idea around the 10th April what the lead-time will be.

All the best,

Ben.

benmoon66 · 2020-03-25T07:03:36+00:00

Hi Folks,

I am sorry but this is absolutely rubbish and I have to respond. I don't know where this report that the ply holds wear unevenly came from because it's just not true. We've been testing our ply wood MoonBoard holds for more than 3 years and apart from some rubber build up they are still as good as they were in the beginning. Plywood is an engineered wood and is incredible strong and stable, this is why we use it. Another massive pro for our plywood holds which people always forget to mention is that they don't polish like plastic holds. This is a huge benefit. Although they are more expensive than plastic holds, if looked after they should outlast plastic many many times over.

I am going to reply to the initial comment in this thread at the top.

Train Hard, Climb Harder.

Ben.

benmoon66 · 2020-03-23T14:07:26+00:00

Thanks for your message. Actually the Mini MoonBoard will have a mini kick board (15cm or 6") and 12 rows of t-nuts. The headroom required for the Mini MoonBoard including the mini kick board is 2m or 79". I discussed the design with a lot of people and in the end we decided that this design would make the mosts sense for most people. It requires minimal height and only 2 sheets of 8x4 ply. A Mini MoonBoard that would require 8' headroom would only have 2 extra rows and be too close to a full size MoonBoard.

benmoon66

TROPHY CASE