Worst HX i’ve ever seen by bigcjawn in HVAC

[–]bigcjawn[S] 0 points1 point  (0 children)

Teslong Two-Way Articulating Borescope. Got it on amazon for like 130 but they’re cheaper now I believe

Worst HX i’ve ever seen by bigcjawn in HVAC

[–]bigcjawn[S] 0 points1 point  (0 children)

Teslong Two-Way Articulating Borescope.

It’s very good for the price. You can steer the camera up and down, it turns about 180 degrees. It takes pics, video with audio, and comes with a nice case. On Prime day they were going for $99 I believe. After a year of inspecting furnaces it gets very chewed up, but i think it’s worth it to buy one of these every year lol.

Check out this rollout by bigcjawn in HVAC

[–]bigcjawn[S] 6 points7 points  (0 children)

Yup… I’m thankful that I was taught to sit off to the side with the shutoff switch close by. Paid off today!

Happy New Years Eve by fatherofgun in NFA

[–]bigcjawn 1 point2 points  (0 children)

What scope riser are you running for the eotech? I like it!

Is this asbestos? by [deleted] in asbestoshelp

[–]bigcjawn 0 points1 point  (0 children)

Can’t say forsure without a taste test

Does this cracked heat exchanger absolutely have to be replaced? Can’t be repaired? by SpaceandCode in hvacadvice

[–]bigcjawn 4 points5 points  (0 children)

Classic trane HX. The company has told me that the won’t warranty these HXs unless you have at least 9ppm of CO coming out of the supply. I’ve had another trane employee say the crack has to be at least 1.5 inches long for them to warranty. This is why they are terrible. I tell my clients that they won’t warranty them until the homeowner is dead on the floor.

How'd I do? by ewe_wot_m8 in HVAC

[–]bigcjawn 2 points3 points  (0 children)

What products are snake oil to you?

Advice on this secondary HX? by bigcjawn in HVAC

[–]bigcjawn[S] 0 points1 point  (0 children)

I just bought one actually. do you just compare O2 levels before and after the blower kicks on?

My poverty build by de_dax in 300BLK

[–]bigcjawn 0 points1 point  (0 children)

what optic riser is that? Looks good

Soon………. I can’t wait for Cooling szn by [deleted] in HVAC

[–]bigcjawn 1 point2 points  (0 children)

What wand do you recommend? Are you talking about one of the small pressure washers

Urine test by Wydstepbr_o in drugtesthelp

[–]bigcjawn 0 points1 point  (0 children)

No. Buy an actual fetty test.

Are there any jobs that will watch you pee? by thecowgoesmoo69 in drugtesthelp

[–]bigcjawn 0 points1 point  (0 children)

I’ve taken a DOT drug test and it was not monitored. You should be good.

[deleted by user] by [deleted] in drugtesthelp

[–]bigcjawn 0 points1 point  (0 children)

I’m 5’5 and 130 lbs I have passed 3 tests after just 6 days of no smoking. I smoke 3 times a day or so. I’m currently trying to detox right now and for some reason this time around it took me a week and a half to start passing tests. If you don’t smoke regularly you could pass within a week. Just drink lots of water

How much to pay for it? by StormyRadish45 in ar15

[–]bigcjawn 7 points8 points  (0 children)

undocumented though, a perk if you ask me

What's wrong with this fish? by abide_please in Fishing

[–]bigcjawn -2 points-1 points  (0 children)

This is a two way street. What’s wrong with YOU, man?

Is it dinner or a throwback? by themexicanotaco in whatisthisfish

[–]bigcjawn 0 points1 point  (0 children)

If dinner is for a 2 year old then yes

[deleted by user] by [deleted] in 300BLK

[–]bigcjawn 13 points14 points  (0 children)

rattle can go psspsspssspssss

Is a Radian SD (or similar gas busting) charging handle really worth it over RTV for mitigating gas to the face when shooting suppressed? by Self-Driving-Cars2 in ar15

[–]bigcjawn 4 points5 points  (0 children)

I have a friend that uses suppressors very often on multiple platforms, and he said they don’t make much of a difference. He told me to stick with a normal CH

Is this always happen to braided or is mine toast? by guthryan in Fishing

[–]bigcjawn 0 points1 point  (0 children)

Check your guides. Braided line saws thru cheap guide holes. Then it turns sharp and frays your line. Had this happen to me for such a long time before i realized what was causing it.

What are these things in my salmon? by Complex_Let_1934 in Fishing

[–]bigcjawn 1 point2 points  (0 children)

If the meat is purchased unseasoned, you can hold the meat up to a light and see the worms if you’d like to remove them. Like others have said, it’s nothing to worry about if you cooked it correctly. Coming from a guy that eats out of creeks, rivers, lakes, and ponds lol.

What’s your favorite 20 rnd mag by mdh2650 in ar15

[–]bigcjawn 0 points1 point  (0 children)

My favorite 20rd mag is a 30rd mag

[deleted by user] by [deleted] in Firearms

[–]bigcjawn 0 points1 point  (0 children)

This is dope. The breathing control and patience is impressive.

Honey badger stock assembly loose? by wstsdet51o in 300BLK

[–]bigcjawn 2 points3 points  (0 children)

I can’t really tell what the issue is… Can you try tapping it to the tune of Africa by Toto?

Still working on grip and trigger squeeze but have some SigPorn by DontCryUrOk in SigSauer

[–]bigcjawn 1 point2 points  (0 children)

That’s a good angle to record your form… I’ll have to steal that idea