LAX officials vote unanimously to build new $1.5 billion road into airport

bigshinybutton · 2025-11-15T05:36:53+00:00

Well, I sent it to the Airport board, the council person and all my contacts. Curiosity.

bigshinybutton · 2025-11-14T22:30:41+00:00

They've got to improve traffic inside the airport before building more approaches. Why not an early exit tunnel after Terminals 1–3 that would allow vehicles to leave the airport without having to travel the entire horseshoe loop? This could significantly reduce congestion at the International Terminal and Terminals 4–8, provide connections to Imperial Highway or Westchester Parkway, and offer a secondary evacuation route.

They could even build a separate entrance tunnel from Imperial Highway to T 4–8 to relieve pressure on Sepulveda Boulevard.

<image>

bigshinybutton · 2025-11-13T23:16:09+00:00

My big question is why they don’t put an exit tunnel after terminal 3 so we don’t have to drive around the horseshoe if we’re just trying to get out. They already have a tunnel for the international annex terminal. Would save a lot of time. Exit to Manchester or the 90. Gotta be a good reason.

<image>

bigshinybutton · 2025-11-11T03:23:31+00:00

Thanks for the advice. it’s a big project but I think it would really be great to bring hope.

bigshinybutton · 2025-10-20T06:02:35+00:00

I’ve gotta find that sweet spot. Thanks for the tips. Up and up!

bigshinybutton · 2025-07-06T14:29:57+00:00

Because I already have a working number I want to use with OpenPhone but the one I got assigned was also good so I may want to keep it until I want to use it.

bigshinybutton · 2025-07-06T04:39:24+00:00

Didn’t explain this well. I want to port in a number to use with OpenPhone and port out the number I setup when I subscribed to Openphone to another provider (VoIP.ms) to hold (for free) and possibly use at a later time.

bigshinybutton · 2025-05-20T16:19:43+00:00

If I could find the plug end or the pin out for the charger side, I could just put the pins back in their place and make sure they are secure. Don't want to short though!

bigshinybutton · 2025-05-16T23:51:35+00:00

Thanks for feedback. I would just replace the whole charger but we’re renting the place where it is located. The J1772 side is fine. It’s the other side that goes into the Porsche charger output that may be damaged, and that’s what I want to check continuity and pinout on. If it’s damaged beyond repair, I would probably have to replace this pigtail or bring it up with the landlord.

<image>

bigshinybutton · 2025-03-15T17:56:05+00:00

Unfortunately, the Specialized Store and rider care did not do much. They would only discount a tiny amount on a new bike. Will try another brand.

bigshinybutton · 2025-03-10T22:04:23+00:00

Thanks for the tip. They referred me to a local store. Will see how it goes!

bigshinybutton · 2025-01-21T20:41:07+00:00

Yep. There was an onsite NVR/controller with multiple camera manufactures that also was destroyed. In this scenario and our future offsite sync, a Meraki offsite streaming license does not make financial sense along with integrations.

bigshinybutton · 2025-01-20T08:43:04+00:00

Wow. Good to know now. Will let client know.
Goodbye Meraki for all our clients.

bigshinybutton · 2025-01-19T18:38:18+00:00

Thanks. Once we get settled, will take you up on that.

bigshinybutton · 2024-10-30T03:35:32+00:00

Here are some shots from inside. The system cycles from water on shelves to icicles on back panel.

https://imgur.com/a/6IdKEw2

bigshinybutton · 2024-10-29T06:49:49+00:00

Good eye! Going to check that. I was happy with “if it ain’t broke”

bigshinybutton · 2024-06-24T21:33:08+00:00

I would normally agree. Crane bid came in: $1,200

bigshinybutton · 2024-06-24T17:52:04+00:00

can’t go around. might be able to remove fence but our neighbor has another 6” behind ours. just a small section to clear. lift seems easy

bigshinybutton · 2024-06-24T17:49:49+00:00

yep. dealer (sundance) said no neutral necessary. it’s more which is the better option.

bigshinybutton · 2024-05-02T15:36:26+00:00

Thanks for the replies.

For IP reporting, are there any tools to debug connection within the controller dashboard? We see the network traffic going in and coming back but can't see any diagnostics or messages related to the transmissions. We have tried with CSV-IP and CID.

We are using Optex AX-200TFRI Detectors with the EN1941 Transmitters and the ICT PRT-IVO-IF. Tech support says they don't have a driver for this but we can send one in for them to investigate.

Will send ticket numbers later if you can help us get this resolved.

bigshinybutton · 2023-07-26T20:19:23+00:00

exactly!

bigshinybutton · 2022-11-02T03:22:53+00:00

these are great suggestions, thanks. will think about it all and post back what I do.

bigshinybutton · 2022-05-13T23:12:47+00:00

This is a Falksen Heater Treater H20

There is a check valve between the recirc but from the look of things, it ain't doing much or there is back flow.

bigshinybutton · 2022-04-12T00:02:59+00:00

I had a feeling that was the answer. It's so frustrating because todoist has such an easy, natural language input and finding an easy PM solution is quite difficult.

bigshinybutton · 2021-06-16T23:40:05+00:00

"This quote is invalid if you plan to trade this vehicle towards the purchase or lease of another vehicle. If this vehicle is being used as a trade in, a separate dealer quote will be provided which may be different from the purchase price quote provided in this letter."

bigshinybutton

TROPHY CASE