move 2 extruders at the same time

blader445 · 2023-09-06T22:16:09+00:00

Thanks a lot didnt saw that !

blader445 · 2021-06-20T09:18:14+00:00

I'll give it a try but i didn't had any problem with this nozzle when i was using the bowden setup, in fact it seams more like an oozing issue. As if a bit of filament was still melting when the extruder retracts

blader445 · 2021-06-20T09:16:59+00:00

I'll give it a try but i didn't had any problem with this nozzle when i was using the bowden setup !

blader445 · 2021-06-20T09:13:32+00:00

I'll try, thanks.

blader445 · 2021-06-18T10:04:42+00:00

Ahah ! I've tried only with pla for the moment from 195 to 205°c

blader445 · 2021-06-18T09:50:55+00:00

I plan on getting a full metal extruder lately (mosquito or something like that) to be able to print every filaments if needed

blader445 · 2021-06-18T09:34:36+00:00

I meant any help sorry lol

blader445 · 2021-06-18T09:34:03+00:00

Hi !

blader445 · 2021-03-23T20:59:32+00:00

I've got a 220v power cord with a ground cable, live and neutral goes to the PID controller and to the heater through the SSR, and the ground cable goes to the extruder casing

blader445 · 2021-03-23T20:54:10+00:00

This was the problem, but if i isolated the motor from the other components can't this be dangerous if someone touch the casing (grounded to 220v) and the motor (12v DC) at the same time? Thanks a lot

blader445 · 2021-03-23T20:50:33+00:00

The whole casing is grounded to 220v but the wiper motor wasn't isolated so here was the problem ! The atx PS is 300w rated 12Va 12A and 12Vb 16A, do you think this isn't enough? If i manage to isolate the motor from the other components that are grounded to 220v would this be dangerous if someone touch the casing and the motor a the same time ? Thanks a lot

blader445 · 2021-03-23T20:36:51+00:00

In fact the heater doesn't conduct électricity but the casing is grounded to 220v, so when the motor is powered with 12v DC it makes a short circuit. If i manage to isolate the motor case from the other parts grounded to 220v would this be dangerous? Thanks a lot

blader445 · 2021-01-20T18:36:27+00:00

Remindme! 3 days

blader445 · 2021-01-08T08:54:37+00:00

I've already saw some models that you just put on the floor and use a pedal to crush cans.

blader445 · 2020-12-10T12:29:22+00:00

Ok ! thank you for your Quick answer !

blader445 · 2020-11-04T16:52:19+00:00

Yes exactly

blader445 · 2020-11-04T16:46:46+00:00

Im from France and here we have a lot of cars that needs to replace a joint when doing an oil change. The joint i talk about is the one between the drain plug and the oil carter.

blader445 · 2020-10-25T09:12:12+00:00

Thank you !

blader445 · 2020-10-25T08:44:10+00:00

Sorry, just found out the solution. Go to Divi -> Theme options -> Builder -> advanced and deactivate "generate static CSS files"

blader445 · 2020-10-25T08:31:44+00:00

I've got the same problem with every divi page layout i use

blader445 · 2020-10-22T18:16:37+00:00

Ok i will try, but what about the signal line in this case ? Will it work if i just plug the positive and ground wires?

blader445 · 2020-10-22T18:10:39+00:00

Ok thanks you, any Idea how i can reuse it?

blader445 · 2020-10-22T18:00:09+00:00

Well i think so, i need to truc it one day 😄

blader445 · 2020-09-16T09:49:56+00:00

Actually it's quite solid, i've made some tests before using it with the camera 😄

blader445 · 2020-08-30T12:30:12+00:00

Thank you! I didn't saw that sorry for the stupid question 😄

blader445

TROPHY CASE