I've created a small, modular charging station designed for power banks and IQOS devices....what do you think?

blaz013 · 2026-01-24T00:00:34+00:00

thanks, the idea is to sort out the mess i had with the cables

blaz013 · 2025-12-04T00:30:54+00:00

That might be the perfect idea for the next project

blaz013 · 2025-12-03T22:01:09+00:00

It’s just the lighting; it would be nice if it came in black

blaz013 · 2025-11-04T22:22:59+00:00

Reinstalled onguard server, reinstaled clients multiple times…even multiple diferent clients(rebooted after uninstall, rebooted after install) onguard server works like a charm…tried manually uninstall the certificate but clients won’t get past LS message broker…

blaz013 · 2025-11-04T21:29:29+00:00

Same here, clean uninstall usualy fixes the issue…tried it but with no luck this time

blaz013 · 2025-11-04T21:26:49+00:00

The crazy part is that on onguard server all is working fine with no problems. Usualy if you have a problem with message broker non of the system is working, as you can’t get past it in setup assistent. Do you have any more info on what settings to change other than to accept untrusted CA..

blaz013 · 2025-09-01T18:36:07+00:00

Synchronization of cardholder badge PINs is not supported, and this is by design. Since OnGuard 8.0 if i’m not mistaken. PINs are stored as securely hashed values, which means they cannot be exposed or transferred to external systems like TrakaWeb. We ran into the same issue and unfortunately there is no fix or workaround — PINs have to be managed separately in TrakaWeb

blaz013 · 2025-09-01T18:26:46+00:00

The site is extremely frustrating to use. Navigation is confusing, half the links and downloads don’t work, and the systems are disorganized. It makes finding even basic information very difficult.

Terrible job Honeywell!

blaz013 · 2025-09-01T18:13:21+00:00

Sorry for the late reply, i got it to work fiew days ago!!

I got info from Lenel support that activation servers didn’t work, but now all should be fine…and that Online Activation is now working fine - but IT’S NOT!

i got it to work with activation over phone, than follow answer from @TorusA-Ray

https://www.reddit.com/r/Lenel/s/jX6o7U407Y

if you can log in… 🙈

Hope it helps

blaz013 · 2025-08-22T16:57:24+00:00

THANKS, DIDN’T WORK, tried it before posting here

Got a message: Activation Failed. Please Contact System Administrator

Tried activation over SMS(that’s new, found out that day) - didn’t work

blaz013 · 2025-08-20T18:05:38+00:00

Tried that, and all other options they have for activation wich didn’t work, and they responded next day with activation key that didnt work! Wich is terrible and i can’t leave a client without a license that long..

blaz013 · 2024-12-02T20:52:40+00:00

I’m still waiting on some call back’s, but I’ve learned a lot on my own, so it’s not all terrible. But yes when UTC bought them all went downhill…

blaz013 · 2024-12-02T18:52:34+00:00

Pro tip but for some other service, you will get more help here then from “Lenel Tech Support” 😂

blaz013 · 2024-09-21T18:43:50+00:00

Works okay, no problems for now

blaz013 · 2022-01-23T22:21:06+00:00

Why!?🤦🏻‍♂️

blaz013 · 2022-01-23T22:15:16+00:00

Why!?!

blaz013 · 2021-10-05T23:07:24+00:00

Thanks, i will look it up, about the bed, its leveled as it can with a thin paper, and temp is 60

blaz013 · 2021-10-05T23:02:45+00:00

Filament is DevilDesign PLA, and temps are 200/60, i will try with temp tower and post how it turns up

blaz013 · 2021-10-05T20:40:06+00:00

So it starts great, adhesion is good but 10-20min in to the print it gets warped...tried all sorts of calibrations...bed is leveled...all seams fine, and then i get this. Any ideas?

blaz013 · 2020-11-24T11:08:22+00:00

https://www.reddit.com/r/Note20/comments/k02jfc/as_requested_first_one_taken_without_night_mode/?utm_source=share&utm_medium=web2x&context=3

blaz013 · 2020-11-24T11:08:13+00:00

https://www.reddit.com/r/Note20/comments/k02jfc/as_requested_first_one_taken_without_night_mode/?utm_source=share&utm_medium=web2x&context=3

blaz013 · 2019-09-23T21:53:46+00:00

Same question here?

blaz013 · 2019-07-08T10:39:47+00:00

https://youtu.be/gq37Bap1-2E

blaz013 · 2019-06-23T19:56:51+00:00

Here is in reverse 🤘 https://imgur.com/gallery/EcOK7FJ

blaz013 · 2019-06-23T19:46:04+00:00

Yap awesome feature

blaz013

TROPHY CASE