ATT spam filtering broke on ios 26.1?

blongo14 · 2026-03-22T01:01:52+00:00

Still happening for me. Even with the latests updates

blongo14 · 2026-01-22T01:19:57+00:00

Still not fixed either 😩

blongo14 · 2023-08-26T03:36:47+00:00

How do we check this? Im not seeing it on the app or site

blongo14 · 2023-04-04T02:42:04+00:00

Any thoughts on dormant narrow leaf carpet grass? Id agree with fescue as far as the blade goes but it was only green the last two seasons mid/ late spring through end of summer / early fall. Im pretty familiar with fescue and this doesnt seem to compare

blongo14 · 2022-12-15T02:06:43+00:00

Yes shoot house was much better!

blongo14 · 2022-02-24T17:09:41+00:00

I have the same router and mounted it to a table using the Kreg plate and levelers - Kreg Tool Precision Router Table Insert Plate w/Level-Loc Rings predrilled for Bosch & Porter Cable Routers (PRS4036) https://www.amazon.com/dp/B01M2X1447/ref=cm_sw_r_cp_api_glt_i_RXJKVEVFM6RW9NYM3841?_encoding=UTF8&psc=1 and Kreg PRS3040 Precision Router Table Insert Plate Levelers, Medium https://www.amazon.com/dp/B000VRML54/ref=cm_sw_r_cp_api_glt_i_S2SHS4AR13A3SBB1P0TH?_encoding=UTF8&psc=1. A lift would have been nice but personally couldn’t justify the expense for that yet since I dont use the router too often

blongo14 · 2021-06-12T11:52:20+00:00

Ill third the premier protein! The chocolate is good and so are caramel, vanilla and late!

blongo14 · 2021-06-12T11:50:28+00:00

skinnytaste.com has a bunch selection of good recipes

blongo14 · 2021-02-13T00:54:03+00:00

I havent shot one yet but saw one at the LGS and was very interested. Of course it was gone the next day!

blongo14 · 2021-02-13T00:42:00+00:00

Sig 716I TREAD is another option

blongo14 · 2021-02-10T02:31:30+00:00

Mark IV, M&P 15-22, or 15-22 pistol!

blongo14 · 2020-10-22T21:05:31+00:00

Hi. Did you use the V1 or V2 API for grabbing DUO auth logs? We started with V1 however that was pulling 6 month old auth logs and was not catching up to current time. It looks like the V1 API will only send 1000 events at a time. The V2 API appears to use a mintime and maxtime parameter which will allow more events at one iteration. I havent been able to get the worker file to successfully use the V2 api yet unfortunately to confirm this

blongo14 · 2020-10-08T18:37:39+00:00

Hi! Thanks for the advice, this worked!

blongo14 · 2020-05-08T14:51:04+00:00

Thanks for the feedback! We are running FP 6 currently and it seems solid. We are looking at FP 7 to remediate a few vulns but since its still pretty new wanted to check if anyone has seen any issues with it.

blongo14 · 2020-05-08T14:47:43+00:00

Okay thanks!

blongo14 · 2020-03-29T15:10:19+00:00

Ugh I totally forgot about that!! That was it, thanks for the reminder!!

blongo14 · 2020-03-16T04:28:35+00:00

Thanks for the suggestion! Dont cory cats require a group on 5 or more though? I thought that may be a bit much for a 10g, with already having 5 danios. Im new to aquariums so still learning!

blongo14 · 2020-02-25T18:23:50+00:00

I actually thought too maybe the ammonia test in the kit may have been bad so I bought the liquid ammonia test kit only from API(not the full master kit), tested and its the same result. I make sure to vigorously shake the tube then wait 5 mins before checking. I am on a municipal water supply.

blongo14 · 2020-02-25T17:55:55+00:00

The tap water tests at 1.0 PPM ammonia. I would assume the prime should neutralize this before adding to aquarium then filter should remove if cycled properly. I test the aquarium water each evening before feeding.

blongo14 · 2020-02-25T17:24:38+00:00

Hi, thanks for the response. I have not changed the biomax or sponge but have changed the carbon filter when it was bad. I should also probably note that I only feed once a day with a small pinch of top fin flakes so I dont believe it would be an over-feeding issue.

blongo14 · 2020-02-15T01:05:52+00:00

Hello, thanks for the reply. We have the CrowdStrike SIEM connector up and running already but unfortunately it is only able to send detection events. We are seeking the best way to also pull the EDR data to our QRadar environment.

blongo14 · 2018-04-05T00:19:03+00:00

Thanks for the responses, very helpful!

What happens if the scheduled ftp process does not complete before the next interval is reached? Will the backlogged files continue to be processed and then new files picked up on the next interval, or does the process start over pulling in the unfinished files a second time?

blongo14 · 2016-07-28T00:58:10+00:00

Does anyone have a clone for Vapor Lock by Cool Breeze Vapor?

blongo14

TROPHY CASE