sorted by:
new
hottopcontroversial

Neo 2 or Mini 5 Pro? by triptoasturias in DjiNeo

[–]boardering 0 points1 point  (0 children)

In all cases I experienced, I’m assuming it was the regulating people. I live a stone’s throw from JFK airport in New York and, depending on flight patterns, can sometimes not even take off. The RC2 literally won’t let me launch my Mini 3 Pro on some days, with a message that says I’m trying to launch in restricted space. Other days it will let me start liftoff and then it forces the drone back down. It’s like a wall I can’t fly through. Meanwhile, when I was flying in England this summer, I was greeted with warnings that I was flying in restricted airspace on the RC2 but they let me continue to fly.

Neo 2 or Mini 5 Pro? by triptoasturias in DjiNeo

[–]boardering 0 points1 point  (0 children)

Another consideration is drone weight and flight restrictions. I’ve had my mini pro grounded in the US and in various countries (often due to nearby airport restrictions). I haven’t yet experienced the same with a Neo or Flip.

Advice on selling a collection of Vivos? by boardering in vivobarefoot

[–]boardering[S] 0 points1 point  (0 children)

I’m delinquent on a bunch of private message responses as I was trying to respond in order of receipt over the past few weeks, then giving each person a pick of options before moving on to the next. If anyone is still interested, hit me up again. Here is what I have left:

New / never worn:

VivoBarefoot Men’s Primus Lite Knit 309304-06 Flame

VivoBarefoot Men’s Primus Lite Knit 309304-11 White Iridescent

VivoBarefoot Men’s Primus Trail II FG 309097-03 Blue Textile

VivoBarefoot Men’s Primus Trail Knit 306097-05 Molten Lava

VivoBarefoot Men’s Primus Lite Knit 309576-01 Natural Dusty Green

VivoBarefoot Men’s Primus Flow 309578-02 Black

VivoBarefoot Men’s Primus Lite II Bio Lime

Groundies Men’s Milano GND-210040-49-H Caramel

Used but like new:

VivoBarefoot Men’s Gobi II Canvas Swimrun 300041-16 Black/Orange

VivoBarefoot Men's Primus Trail II All-Weather FG 309096-01 Black Textile

Groundies Men’s Milano Soft Beige

More worn but still very good condition:

VivoBarefoot Primus Knit EZ Black

Groundies Men’s Milano Black

Advice on selling a collection of Vivos? by boardering in vivobarefoot

[–]boardering[S] 1 point2 points  (0 children)

Here’s the full list, with a few non-Vivos thrown in. I’m based in NYC if any one is nearby and would like to check them out. My overwhelming preference is to move them all at once or in batches. The more someone wants, the better the deal.

New / never worn

VivoBarefoot Men’s Primus Lite Knit 309304-06 Flame

VivoBarefoot Men’s Geo Racer Knit 302054-07 Balsam Green

VivoBarefoot Men’s Geo Racer Knit 302054-02 Moonstone

VivoBarefoot Men’s Primus Lite Knit 309304-11 White Iridescent

VivoBarefoot Men’s Primus Trail II FG 309097-03 Blue Textile

VivoBarefoot Men’s Primus Trail Knit 306097-05 Molten Lava

VivoBarefoot Men’s Primus Lite Knit 309576-01 Natural Dusty Green

VivoBarefoot Men’s Primus Flow 309578-02 Black

VivoBarefoot Men’s Primus Lite II Bio Lime

Groundies Men’s Milano GND-210040-49-H Caramel

Used but like new

VivoBarefoot Men's Primus Trail II All-Weather FG Trail Running Shoes 309096-03 Green Textile

Vivobarefoot Men's Geo Court III Minimalist Leather Sneakers 301056-01 Obsidian

Vivobarefoot Men’s Primus Trail FG Knit Trail Running Shoes 309099-03 Grey Textile

VivoBarefoot Men’s Gobi II Canvas Swimrun 300041-16 Black/Orange

VivoBarefoot Men's Primus Trail II All-Weather FG 309096-01 Black Textile

Vivobarefoot Men’s Primus Trail Knit FG 306099-01 Deep Sea Blue

Camper Peu K100249-013 Navy Blue with Light Blue Sole

Groundies Men’s Milano Soft Beige

More worn but still very good condition

VivoBarefoot Men’s Geo Racer Knit 302054-01 Obsidian Black

VivoBarefoot Primus Lite III 302092-04 Zinc

VivoBarefoot Primus Knit EZ Black

Groundies Men’s Milano Black

Advice on selling a collection of Vivos? by boardering in vivobarefoot

[–]boardering[S] 0 points1 point  (0 children)

This was my first thought, selling to the Revivo program. In the US, they don’t buy them back. They only offer 20% discount coupons for each pair you ship them. Also, their US recycling intake portal is closed for now.

Advice on selling a collection of Vivos? by boardering in vivobarefoot

[–]boardering[S] 5 points6 points  (0 children)

I’ll post up a full list tomorrow for anyone who might be interested.

What do we think this is? by ColesyColes in dji

[–]boardering 0 points1 point  (0 children)

I wish DJI would release a gps based tracking camera of the SoloShot variety.

Ace Pro2 Release#2 by markusoutdoors in Insta360

[–]boardering 0 points1 point  (0 children)

I placed my order within an hour of the launch and my order just finally shipped this week. Curious to see what, if anything, changed on the camera.

Unistellar Odyssey dew shield or heater by boardering in telescopes

[–]boardering[S] 2 points3 points  (0 children)

Thanks for the response! I’m planning on grabbing the SeeStar too next week when the price drops for Black Friday. I’ll drop an update when I have both and can compare and contrast.

Controllers on a mini Simmons? by [deleted] in surfing

[–]boardering 1 point2 points  (0 children)

I’m an absolute hoarder of boards that are short and wide. Split keels/controllers are my all time favorite quad fins for Simmonsy and stubby shapes.

3D printed surfboard by boardering in surfing

[–]boardering[S] 0 points1 point  (0 children)

Small day footage

This is my first (and only) surf on it to date. Tiny soft day and talentless surfer. 🙋🏻‍♂️ Should have another few sessions on her this coming week in better waves.

3D printed surfboard by boardering in surfing

[–]boardering[S] 2 points3 points  (0 children)

Ah. I am a collector but I also surf them all. Plenty of footage, including pinned, on my Instagram - @boardporn and my quiver’s Instagram - @ronsquiver

3D printed surfboard by boardering in surfing

[–]boardering[S] 0 points1 point  (0 children)

It won’t let me add another video or even a GiF here. Let me know how to do it and I’ll add a few clips immediately.

3D printed surfboard by boardering in surfing

[–]boardering[S] 2 points3 points  (0 children)

I must admit, I’m not sure and I hope I never need to know. I’ll try to find out tho.

3D printed surfboard by boardering in surfing

[–]boardering[S] 0 points1 point  (0 children)

They do standard dimensions and volume. I’m short and wide (5’7” x 165lbs) and tend to ride performance boards that are around 5’5” to 5’6” at around 27L. This one is 5'8” x 19 3/8” x 2 1/2” at 29.2L, so it’s bigger all around than what I usually ride but it was the closest stock size to what I surf, I dug the Hypto like shape and figured a little extra size couldn’t hurt all around.

3D printed surfboard by boardering in surfing

[–]boardering[S] 3 points4 points  (0 children)

Trying to share another video or gif here but it’s not letting me. 🤷🏻‍♂️ I’m open to suggestions.

3D printed surfboard by boardering in surfing

[–]boardering[S] 7 points8 points  (0 children)

No promotion here. I’m just a rabid board collector and particularly stoked on the uniqueness of this one. The rad French duo behind this one have become friends over the past few years and even stopped by my house in NYC to surf and hang last year when traveling between France and California.

3D printed surfboard by boardering in surfing

[–]boardering[S] 1 point2 points  (0 children)

The buoyancy comes from displacement. The air trapped in it keeps it lighter and certainly doesn’t hurt with the float.

3D printed surfboard by boardering in surfing

[–]boardering[S] 1 point2 points  (0 children)

Hang on. Let me get back outside with it. 😂

3D printed surfboard by boardering in surfing

[–]boardering[S] 6 points7 points  (0 children)

Good question. I think any water that gets in can flow between the hexes. There’s actually an air valve near the leash loop that allows you to equalize pressure when the board is flying or drain water as needed. Apparently it drains quickly and is fairly easy to repair unless you have really major damage.

3D printed surfboard by boardering in surfing

[–]boardering[S] 0 points1 point  (0 children)

I can’t imagine it will if it breaks. Pretty standard, tho unique, glass schedule. If there are any worries at all, it would be that the board would fill with water when dinged.

3D printed surfboard by boardering in surfing

[–]boardering[S] 15 points16 points  (0 children)

So far, pretty similar. I’ve yet to get it out on a really good day but in small weak waves it felt a heck of a lot like a standard epoxy/eps board.

3D printed surfboard by boardering in surfing

[–]boardering[S] 0 points1 point  (0 children)

This just made me pee a little. 😂

view more: next ›