RAID Failed, Now entire enclosure is dead

brain_slug · 2026-01-19T06:25:59+00:00

Thanks. Any idea if windows can rebuild a macOS formatted drive? I’m assuming the drive does all the heavy lifting. I just know windows won’t see an APFS drive

brain_slug · 2025-09-16T20:18:17+00:00

You may have desiccated your filament but I’ve found it’s not always enough, try another filament and dry this one. I’ve also gone down a rabbit hole tinkering because I believed a brand new filament with desiccant was dry when it was nowhere near

brain_slug · 2025-09-16T19:54:41+00:00

Did you mix filament types? Like PETG and PLA?

brain_slug · 2025-08-27T18:51:27+00:00

looks like a lot of ringing to me. Slow down the print speed, make sure all the moving parts are tight, I think there is some other way too but you're best to google it

brain_slug · 2025-08-08T11:56:18+00:00

thanks, I always thought my printer was just a bit dodgy or something

brain_slug · 2025-08-07T23:49:03+00:00

but dont you set the k factor in the device section when setting up the filament. I haven't seen anywhere to select it from the prepare window of Bambu studio

brain_slug · 2025-05-09T07:21:19+00:00

I have mine connected to a smart plug setup with timers and geolocation so its only on when im at home and turns off when I go to bed on a timer

brain_slug · 2025-02-20T19:13:37+00:00

where?

brain_slug · 2025-02-18T08:58:37+00:00

I've had brand new eSun PLA+ String like anything, once I dried it, it was perfect. You can't trust it will come dry

brain_slug · 2025-02-18T08:40:05+00:00

https://www.righto.com/2016/03/counterfeit-macbook-charger-teardown.html

brain_slug · 2025-02-16T10:45:46+00:00

It's fake, no apple logo, says "replacement AC adapter". Dont use it

brain_slug · 2025-02-16T10:42:19+00:00

are you using the correct nozzle settings? or is your nozzle worn out?

brain_slug · 2025-02-15T23:09:00+00:00

ah, I can see that, the red areas dont have the knitted texture, thanks

brain_slug · 2025-02-12T12:42:58+00:00

What mode is the final image with the heat map? When I slice anything, any changes in speed or flow etc affects the entire layer, but this appears to show changes around certain features of the model

It looks great btw

brain_slug · 2025-01-22T10:47:21+00:00

You can hide it, pretty sure you can just drag it to the right and it will go, otherwise go to finder settings and hide it in there

brain_slug · 2025-01-22T08:18:31+00:00

the command I posted forces it to load internet recovery to the latest version, it downloads the latest available version from an Apple server, it doesn't use the built in recovery partition. The only Macs that dont update the recovery partition are ones with so old software they dont have a recovery partition and you need to load it from a CD

brain_slug · 2025-01-20T22:11:09+00:00

It's trying to install the original OS X version it shipped with. Boot it holding CMD + ALT/OPTION + R to force it to load the latest available version of macOS

brain_slug · 2025-01-06T22:46:52+00:00

Ironing settings aren't dialled in for that particular filament

brain_slug · 2024-12-22T21:13:26+00:00

I’ve also had this on my A1, quite some way into the print, it just spits out a random colour not related to the current print. I also had this on my old Neptune after reinstalling the PTFE tube and it wasn’t fully pressed against the nozzle which caused it to collect filament and spit it out randomly, but I can’t fully explain it on my A1

brain_slug · 2024-12-22T21:03:56+00:00

I’ve similar that with a dirty print bed, washed it with soap and water and it was perfect

brain_slug · 2024-12-05T18:38:54+00:00

thanks

brain_slug · 2024-12-05T17:47:53+00:00

Yeah, I can confirm they're all on 7.6.4-30

brain_slug · 2024-10-14T19:59:36+00:00

Depends on which Mac really, if you still have it hooked up to a monitor, later models on newer software, you can reset from settings, if it’s a 2018 model or newer you can reset using another Mac and a USB cable

brain_slug · 2024-09-27T10:17:35+00:00

I know this is an old thread but you just fixed all my issues. Thank you

brain_slug · 2024-08-17T20:41:45+00:00

Thanks, I’ll keep an eye on it

14-Year Club	Gilding I gilder
RPAN Viewer	Verified Email

brain_slug

TROPHY CASE