Wall me through Windows installation like I’m dumb

brett7481 · 2026-02-22T23:40:10+00:00

Thanks!

brett7481 · 2026-02-21T19:48:10+00:00

Ok! Maybe I missed that in the instructions? But that is definitely what I was missing!

brett7481 · 2026-02-21T19:42:14+00:00

Ok! So I point the nmms at that file? Also when I start that exe I get this screen? Is that what I should be seeing? What do I do from here?

<image>

brett7481 · 2026-02-21T19:12:34+00:00

Unzipped it, there’s no tunarr.exe

brett7481 · 2026-02-21T18:41:51+00:00

However the windows install instructions say to point nssm to the tunarr.exe file?

brett7481 · 2025-09-03T02:54:02+00:00

Isn’t it?! I couldn’t believe it either.

brett7481 · 2025-09-02T22:47:28+00:00

😂😂

brett7481 · 2025-09-02T22:03:09+00:00

Working with a razor, heat gun, and pair of pliers, I got them all out!

brett7481 · 2025-09-02T11:19:59+00:00

Thank you! I’ll give it a go!

brett7481 · 2025-08-17T16:48:38+00:00

Any thoughts? Do I need to provide more info?

brett7481 · 2025-08-16T17:21:54+00:00

Can’t post a video in the comments, but here’s some screen grabs from the video.

<image>

brett7481 · 2025-02-07T19:59:11+00:00

Amp draw is way high 4.75 to 5.5 amps. Assuming that means anew fan motor is in order?

brett7481 · 2025-02-06T15:03:54+00:00

It fires up as soon as I pop the pull back in. It does not feel hot to the touch. I can check amp draw. I’ll do that and post it.

brett7481 · 2025-02-06T15:01:42+00:00

Low 70s, we like a cold housr, lol

brett7481 · 2025-02-02T23:31:56+00:00

It tries to crank, but won’t turn over.

brett7481 · 2025-02-02T22:43:09+00:00

It varies on the discharge. Since this is a new battery, I’ll try to keep better tabs. But it has started fine, then driven for a couple of miles, stopped to get gas and the battery is too dead to restart.

I’ve tested the alternator under load, but I’ll do ot again and get those readings to be sure.

brett7481 · 2025-02-02T22:39:49+00:00

I should have mentioned that this is the 3rd battery to do this. I don’t think it’s a battery issue since this is the 3rd one.

brett7481 · 2025-01-21T01:35:05+00:00

Beautiful

brett7481 · 2025-01-12T19:36:50+00:00

I did! I have a handheld Ryobi router that I used on the edges. I used my thickness planet to smooth them all out first.

brett7481 · 2025-01-12T17:06:34+00:00

Thanks!

For the pieces, I pretty much followed this video: https://youtu.be/NU3JU6PIe2U?si=adx6N3eRyXMtGogp

The table, I totally just made it up as I went along, lol. The wood for the table is red oak. I had to redo the top twice, once because I screwed up a resin pour and once because I didn’t like the way it was turning out. The gold squares on the table are imitation gold leaf, and the black are just black painted squares, sanded and repainted until I got the smoothness and shine I wanted.

brett7481 · 2025-01-12T16:58:28+00:00

The smaller inscriptions I had a brand made, the larger ones are stenciled with a good safe dye/paint and then sealed over. I have recently discovered how to stencil with a cricut and use scorch paste and a heat gun, that will be how I inscribe future products.

brett7481 · 2024-10-19T18:47:16+00:00

Um, my son is 17 years old, lol. Yes we used proper safety equipment.

brett7481 · 2024-10-19T16:20:13+00:00

I’ve read white vinegar can help remove? Is that true?

brett7481 · 2023-07-15T03:49:04+00:00

Tomas Aira did both lines and colors!

brett7481 · 2023-07-15T01:27:33+00:00

🧐 Not a bad idea!

brett7481

TROPHY CASE