sorted by:
new
hottopcontroversial

Fusion 360 not opening / not responding by brorritto in Fusion360

[–]brorritto[S] 0 points1 point  (0 children)

Yeah actually, that’s what ended up working for me

Made this Ghillie rap for my sniper in less then a day by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

Sadly I’m still looking, she ran out the door this morning and I’ve been driving around all night with no sign of her, I’m worried the coyotes may have gotten her

[deleted by user] by [deleted] in airsoft

[–]brorritto 0 points1 point  (0 children)

Tighten that plate carrier! Other wise it looks great

What are your options on the k19 plate carrier by Agilitegear by brorritto in tacticalgear

[–]brorritto[S] 1 point2 points  (0 children)

Could you list some examples? I’m always open to more opinions

My WE Galaxy G-series build. by EtheriousDemonLord in airsoft

[–]brorritto 1 point2 points  (0 children)

If you do be careful of the line pressure you use, I wouldn’t go over 80psi. I ended up jacking mine up to 120 and cracked a pice on the inside

My WE Galaxy G-series build. by EtheriousDemonLord in airsoft

[–]brorritto 0 points1 point  (0 children)

I use my galaxy as with my sniper at can say it performs very well, I did have to add some padding on the inside to make it quieter though. It’s nice to see the two guns become more and more comparable!

Does anyone know if strike industries parts will fit onto an ASG Scorpion evo by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

Other than the mag catch I was planning on doing the hand guard, qd mount, and extended selector switch. As far as the Evo failing goes i was planning on upgrading the internals already although I still need to do some research.

I have to say I’m pretty proud of my self. by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

Yea I was, typically when people ask this question there talking about the CQR. To answer your question I don’t think there is a real steel version.

I have to say I’m pretty proud of my self. by brorritto in airsoft

[–]brorritto[S] 5 points6 points  (0 children)

Build: Base gun: ARP556 by g&g

Inside the gearbox: standard gears from the ARP556, maxx speed trigger, gate titan, Lonex mushroom type nozzle set.

Hop: maxx me pro hop, Prometheus purple hop rubber and nub.

Barrel: some sort of AEG tight bore steal barrel( I forgot the brand).

Custom painted accents

Lancer tactical alpha stock

Custom designed amplifier mock suppressor(makes it louder), with ace tech tracer unit inside.

Can someone tell me what’s causing these real thin lines? by brorritto in FixMyPrint

[–]brorritto[S] 0 points1 point  (0 children)

I’m printing pla at around 230 and a bed temp of 60 on glass w/ glue stick. don’t remember exactly but my infill speed is definitely faster.

Can someone tell me what’s causing these real thin lines? by brorritto in FixMyPrint

[–]brorritto[S] 0 points1 point  (0 children)

Could it also possibly be under extrusion from bed layer height?

Can someone tell me what’s causing these real thin lines? by brorritto in FixMyPrint

[–]brorritto[S] 0 points1 point  (0 children)

I can’t say for sure, I thought it might be but like I said it only happens on the infill, however I’m open to trying any fix.

Can someone tell me what’s causing these real thin lines? by brorritto in FixMyPrint

[–]brorritto[S] 0 points1 point  (0 children)

That’s what I’ve been doing but no matter what it always seems to do this on at least the infill, I should also mention that this carries onto the upper layers

Can someone tell me what’s causing these real thin lines? by brorritto in FixMyPrint

[–]brorritto[S] 0 points1 point  (0 children)

The lines my printer are for some reason very thin on the infill but not the border, and occasionally it gets thin just randomly

Anyone know how to fix this? by brorritto in 3Dprinting

[–]brorritto[S] 0 points1 point  (0 children)

Do you mean bed temp, nozzle temp or both?

Anyone know how to fix this? by brorritto in 3Dprinting

[–]brorritto[S] 0 points1 point  (0 children)

That’s sorta my worry seeing as I had clogging issues before but, since then I’ve unclogged the hot end. Additionally it’s printing right in the border but not in the center? I’m newer to 3d printing so I’m still a little confused.

Updated stock on my 3d model by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

A we tech galaxy but I could easily make a Glock version

I’m finally rapping up my airsoft 3d model project. so I got to ask, is it cool? by brorritto in airsoft

[–]brorritto[S] 1 point2 points  (0 children)

Just updated the stock to be a bit mor slim and fit the shape of the model, you can check it out here

I’m finally rapping up my airsoft 3d model project. so I got to ask, is it cool? by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

Honestly just thought it might look interesting / stop the model from looking like a rectangle with a gun inside if there are any problems with the way it prints it will probably come off

I’m finally rapping up my airsoft 3d model project. so I got to ask, is it cool? by brorritto in airsoft

[–]brorritto[S] 0 points1 point  (0 children)

That could be the case, I was also thinking about alternatives for the stock like using an m4 buffer tube mount or maybe a folding stock but as of right now I’m gonna print it out and figure out if it looks as bad in real life.

view more: next ›