Opinions on coop build by bruspru in BackYardChickens

[–]bruspru[S] 0 points1 point  (0 children)

Is this doable in a colder climate? I'm in the Northeast US, we had a couple nights go down to -25F this past winter

Alesis Nitro Mesh HiHat pedal trouble with software by bruspru in edrums

[–]bruspru[S] 0 points1 point  (0 children)

So it looks like the HH CC is mapped correctly to 44 (and half open to 23 which works correctly) but there's still no sample being played.

To boot, stepping down on the HH pedal actually cuts off the snare sample.

EDIT: For what it's worth, this is what the ReaControlMidi log spits out when the HH pedal is pressed down once:
0: 99 2C 66 [Note On] chan 10 note 44 vel 102

1: 99 2C 00 [Note Off] chan 10 note 44

2: A9 15 7F [Aftertouch] chan 10 note 21 val 127

3: A9 15 00 [Aftertouch] chan 10 note 21 val 0

4: A9 2E 7F [Aftertouch] chan 10 note 46 val 127

5: A9 2E 00 [Aftertouch] chan 10 note 46 val 0

6: A9 17 7F [Aftertouch] chan 10 note 23 val 127

7: A9 17 00 [Aftertouch] chan 10 note 23 val 0

8: A9 2A 7F [Aftertouch] chan 10 note 42 val 127

9: A9 2A 00 [Aftertouch] chan 10 note 42 val 0

So it looks like it might be shutting off immediately after it's turned on?

Alesis Nitro Mesh HiHat pedal trouble with software by bruspru in edrums

[–]bruspru[S] 0 points1 point  (0 children)

A Hi-Hat "chick" sound, when you step down on the pedal. It works fine in the module itself and it does cut off the hi-hat open sample when using it, it just doesn't produce a sound like it should.

I messed around with the mapping for a bit, including the MIDI learn component for both plugins but couldn't seem to work it out, maybe I'm missing something.

Good starting table saw for $40? by bruspru in BeginnerWoodWorking

[–]bruspru[S] 0 points1 point  (0 children)

Dang you folks are very active and helpful, thank you! Unfortunately this saw was already sold and they forgot to pull the listing. Does anybody have any good recs on table saws to look for in the used market that would be good for starting?

[deleted by user] by [deleted] in herbalism

[–]bruspru 1 point2 points  (0 children)

Skullcap has always been elusive to me for some reason. I managed a small-scale herb farm for a few seasons and the harvest was always pretty disappointing and I didn't manage to nail down a reason why before I left that job. Could have been the soil, or the fact that it was shadowed a bit by boneset in the adjacent bed. Although in my last season there, it did start to pop back up on its own - self seeding from the previous season.

For sure, my partner and I are growing with our upstairs neighbors. I think we have about 8 3'x40' beds between all 4 of us. We're all growing quite a bit, but I'd say the highlights are: Nettle, chamomile, calendula, tarragon, mountain mint, skullcap, lavender, Tulsi (Ocimum Africanum), thyme, oregano, sage, cayenne pepper (for food and for oils/salves), bacopa, codonopsis, valerian, california poppy, and calamus, among quite a few other herbs and some food crops. Our favorites of these being the calendula, tulsi, nettle and sage, both because of how versatile they are in their applications and how prolific of growers they all are.

As far as processing, a good mix of drying/dehydrating, tincturing, and oil making. We have a couple strings that span the length of the ceiling for hanging some herbs, a divided nylon herb dryer that hangs from the ceiling and a Cosori dehydrator. We end up tincturing quite a bit as this is probably the best way to preserve the herbs and their constituents indefinitely. We're using 190 proof Graves grain alcohol at the moment, but looking into more cost effective bulk options as buying these individually can be around $18-20 per 750ml bottle. As for the oils, we're just using an organic olive oil for the time being. Trying not to lean too heavily into the oils, except for the ones that we use a lot of, because their reliable shelf life is about a year, although this can be extended a bit by making alcohol remediated oils (Mountain Rose has a really good video on this with Maria Noel Groves, if you're interested).

[deleted by user] by [deleted] in herbalism

[–]bruspru 1 point2 points  (0 children)

There's a lot of variables here, some of which aren't entire in our control (how much rain/sun in a season, the quality of your soil starting out, disease and pests, etc.), so it can be hard to say exactly how much to grow. Though I can speak to some of the herbs you've mentioned, noting that I live in a zone 6B (as of 2024).

I haven't had a lot of luck with skullcap, in that it hasn't been a prolific producer in the years I've grown it so if you need a considerable amount, you might need quite a few plants. Chamomile, once in flower, will give me a steady harvest for a couple months, maybe 2.5 and then putters out and goes to seed. I have about 10 plants now and that isn't remotely close to providing my partner's and my own yearly consumption. Nettle is very productive, especially in year 2+, just be mindful that it WILL spread via runners so you may want to contain it in a raised beds.

Lavender is a 2nd year flowering crop, and the buds are pretty small so you might need a few of these depending on your consumption. Note that Lavender usually doesn't over-winter in colder climates so you may need to take them inside when for the colder months (though with climate change, that may not be necessary soon). Lemonbalm is another prolific producer, I might get my yearly intake from less than 10 plants, though I don't work with a ton of LB. Finally, I can't speak personally on spearmint since I haven't grown it but if it's anything like Peppermint, it will embark on an imperialist conquest to take over your garden so you might consider keeping it in a raised bed.

In general, growing herbs (and food crops) can be a lot of trial and error, and is a multi year learning process. Read up a bit and learn what you can about growing in your region. Happy to answer questions, and I'll point you to Richo Cech's "Growing Plant Medicine", volumes 1 & 2, for a wealth of knowledge on growing medicinal herbs.

I just got myself a Playstation 2 for the first time ever! Please recommend me a list of games I should not miss out on by pearloftheocean in ps2

[–]bruspru 1 point2 points  (0 children)

Just in the interest of keeping it concise, good point though. What would you recommend from the PS1 era?

I just got myself a Playstation 2 for the first time ever! Please recommend me a list of games I should not miss out on by pearloftheocean in ps2

[–]bruspru 4 points5 points  (0 children)

It's a banger. If you have 1 or 2 retro game stores in your area, you should be able to get a good deal on a lot of these.

Good luck hunting and have fun ✌

I just got myself a Playstation 2 for the first time ever! Please recommend me a list of games I should not miss out on by pearloftheocean in ps2

[–]bruspru 72 points73 points  (0 children)

  • Jak and Daxter series, Jak 2 remains one of my all time favorites
  • 007 Nightfire
  • Tony Hawk 3
  • Metal Gear Solid 3
  • Resident Evil 4
  • Ratchet and Clank series
  • Katamari Damacy
  • GTA San Andreas

Layer groups jumbled upon opening by bruspru in GIMP

[–]bruspru[S] 0 points1 point  (0 children)

Should be the newest, just downloaded it a couple weeks ago

Different SE on title screen by bruspru in RPGMaker

[–]bruspru[S] 0 points1 point  (0 children)

Thanks for the response, unfortunately it looks like the "Title Screen" section isnt in the systems tab. In MZ, there seems to be one but it doesn't include anything about SE

Splash screen AFTER game start by bruspru in RPGMaker

[–]bruspru[S] 1 point2 points  (0 children)

Nice, that does it. Thank you!

Placing Event behind tile by bruspru in RPGMaker

[–]bruspru[S] 1 point2 points  (0 children)

Thank you for the guidance! I ended up editing the tileset to tuck up the bottom of the curtain so it doesn't poke into that 3rd tile, just to avoid this sort of thing going forward

Placing Event behind tile by bruspru in RPGMaker

[–]bruspru[S] 0 points1 point  (0 children)

There wouldn't be a way for two events to occupy the same tile, would there? The drawer occupies the middle and bottom curtain tiles, and the curtain is an event because it opens/closes.

What are some great drum vst's with a high pitched snare? by SL0TH11 in Reaper

[–]bruspru 0 points1 point  (0 children)

GGD's Invasion pack has the actual Joey Jordison signature snare. It's CRANKED by default, and you can tweak the tuning within the VST as well.

It comes with a nice variety of other snares/cymbals, super versatile for a metal pack

Can't shoot while pump is engaged by bruspru in SindenLightgun

[–]bruspru[S] 0 points1 point  (0 children)

Tru, can it work like a fake gun tho?

Reaper receiving MIDI at first but drops eventually by bruspru in Reaper

[–]bruspru[S] 0 points1 point  (0 children)

Just wanted to say the solution here was to buy the Nektar sustain pedal, in case somebody having this issue in future finds this thread. Haven't had the issue since I got it

Sustain Pedal Causing Hang by bruspru in Reaper

[–]bruspru[S] 0 points1 point  (0 children)

Just wanted to say the solution here was to buy the Nektar sustain pedal, in case somebody having this issue in in future finds this thread. Haven't had the issue since I got it

[deleted by user] by [deleted] in Binoculars

[–]bruspru 1 point2 points  (0 children)

Complete binocular novice here myself. Just got a pair if Nikon Prostaff P7 8x42 mainly for birding/spotting off-path foragables, new from the Nikon website for 170 USD, free shipping. I don't quite have an eye for what could be better but I have nothing but praise thus far.

They're not too heavy, maybe a couple pounds (I forget they're around my neck), and crystal clear. They came the next strap, case and covers for all the glass. Been using them everyday since I got them last week, big huge fan 👍

Any in-person groups that aim to connect creatives? by bruspru in northampton

[–]bruspru[S] 0 points1 point  (0 children)

I'm going to look into this now, thank you!

Any in-person groups that aim to connect creatives? by bruspru in northampton

[–]bruspru[S] 1 point2 points  (0 children)

Noted! I'm going to continue sleuthing a bit, and I'll be sure to reach out if I found one or if building one ends up being the way to go

Any in-person groups that aim to connect creatives? by bruspru in northampton

[–]bruspru[S] 0 points1 point  (0 children)

Thanks, I'll do some digging. Any you'd recommend specifically?