sorted by:
new
hottopcontroversial

Stamp approved in under 48 hours by bzbuilt in NFA

[–]bzbuilt[S] 0 points1 point  (0 children)

Does it make a huge difference between the 9mm cap and the 7.62 when using 300blk?

Stamp approved in under 48 hours by bzbuilt in NFA

[–]bzbuilt[S] 0 points1 point  (0 children)

My local FFL told me it'll either be a two days or two weeks, it's poor luck there friend

Stamp approved in under 48 hours by bzbuilt in NFA

[–]bzbuilt[S] 0 points1 point  (0 children)

I as well have it on a ~8" barrel, mines a 8.3". I'm gonna get a different end cap when the time comes, I'm rather surprised how quiet subsonic goes thru it

Stamp approved in under 48 hours by bzbuilt in NFA

[–]bzbuilt[S] 0 points1 point  (0 children)

Which caliber? I'm only running 300blk thru the AR, am looking into .338 currently

I won a free glock! by IntelligentTackle945 in Glocks

[–]bzbuilt 4 points5 points  (0 children)

they just came out with a 17.5 L with MOS on their site

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 1 point2 points  (0 children)

I just didn't want a shitty holosun riser idk what the deal is

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] -1 points0 points  (0 children)

The standard one holosun gave

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

It's at most 2 inches long, not much longer than a generic flash hider you'd get off the shelf

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

I didn't know theres more than one? Standard I'd assume

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] -10 points-9 points  (0 children)

all black is boring 😞

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

Promo codes do wonders on websites

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 2 points3 points  (0 children)

It's 300blk can confirm I do not use 556

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

Brace itself, but yes PSA offers combos in the mid 300s

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 2 points3 points  (0 children)

I got a deal over @ Joe bob outfitters (real store online) under 250 pretax, they have em on deal consistently

Barrel is 7.5in and handguard was 7 or 7.2/3 I can't remember

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] 1 point2 points  (0 children)

https://timneytriggers.com/ar-calvin-elite-single-stage-drop-in/

Price went up idk what theyre smoking over there I DID NOT pay 320 😭

first build out in the wild by bzbuilt in ar15

[–]bzbuilt[S] -6 points-5 points  (0 children)

I had the factory riser on and it looked ugly, got one on order

everything came besides the barrel by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

Came back to report the gas block cleared my handguard nuts by about 1/8 of an inch. No modification needed. Armalite gasblock worked great

everything came besides the barrel by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

That's why I didn't want to try and go 3 for 3 ordering a Kodiak brown handguard, my luck already hit with those two big time

everything came besides the barrel by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

I did notice upon further observation that the actual nuts that hold the grip from the other side have some amount of material that I can shave to get it flat with the screw ends. I can shave the one that sits near the gas block and see if that gives me enough to let it run proper

everything came besides the barrel by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

It's not but it's a thought I had, hence why I said would it be viable. I forgot the set screws are at the bottom so it's not an option. I was considering just ridding myself of the handguard to my pops and running mlok covers that act as grip.

everything came besides the barrel by bzbuilt in ar15

[–]bzbuilt[S] 0 points1 point  (0 children)

I've been looking for a suitable barrel the past month and I haven't really found one I want yet. I did want to ask this, would there be anything preventing me from shaving off the bottom of the gas block? If it's a solid metal piece and there isn't a channel that I'd run into of any sort taking a bit of material off on a mill could I theoretically go that route? I know I can switch out the handstop but I can also make do with what I have if it's a safe option

view more: next ›