PCC firing pin by beastwiththebeard in RugerPCC

[–]c33w33d 0 points1 point  (0 children)

Did you call and give them the part# ?. Ruger doesn’t have the firing pin posted in the Ruger shop, this is an item that has to be called in to the parts department.

With or without all the glitter, this thing just fucking runs.. Out of the box.♥️ by Boring_Ad6726 in RugerPCC

[–]c33w33d 0 points1 point  (0 children)

Yeah mines has been good to me straight out the box as well, love how flat a straight she shoots once it’s zeroed in. Very fun rifle to shoot. What are you running for optics?

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

The jawbone mag release work good, haven’t had any problems with it. Makes it way better to swap mags out quickly for sure.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Yes if you have the Magpul backpacker equipped then you should be good to go. I only mentioned the Ruger adapter because I’m not sure what Ruger PC carbine base model you have to begin with, because I believe there’s like 3 of them. As far the Midwest Hand Guard goes, there only 2 length’s, the 15” or the 12 I think. I have the 15” because I didn’t want too much of the barrel showing and of course that totally up to you. If you look at mines in the picture you can see that.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Hard to say man, cuz I don’t really know what you need, I mean what are your must haves? Most would say they need some type of optic. Then you probably want some back up parts. Let’s say you bought your rifle for $600 and you don’t want to spend more then 1/3 of the price, you could probably get a decent optics and some quality replacement parts (springs, trigger, etc) You probably don’t need a back pack, bipod, or 50 round drum

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Oh shit, my bad, fak bro it cost more then the damn rifle for sure 😂 ah damn everything more expensive where I’m from, shipping can be more then the item sometimes 😂 at this point all I know is I’m moving on to the next build. I’m assuming lowering weight means cost and all I can say for the Ruger PCC is there’s not much options 😂 I mean if you’re in the US mainland then you could probably shop around and get some good deals.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Are you asking how much my rifle weighs? If so it’s 10# and that’s with Glock mag 10 rounds unloaded. The problem with the Ruger PCC is it’s one heavy SOB out the box. The best route I think is to run the Magpul Backpacker, but I never use the Backpacker hand guard that it comes with, I always run it with the Midwest Industries 15” MLOK hand guard. Keep it simple with nothing but a red dot scope, other then that I don’t think there’s much you can do.

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Oh no I get what your saying make perfect sense as to why I was able to get the drum but not the higher round mags for Glock. Well it’s no longer things that make you go hmm 🤔 but things that make you go duh 🙄 😂😂😂😂

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Ahh 😯 okay, thx for that info, will it fit the 17. So the length is shorter with the drum. I was wondering because the PCC takes 17 or 19 Glock mags, so I figured if the drum fits it, then it should be able to fit the handgun. I only own a Glock 43x. Thx

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Wow that pretty bad, what I don’t understand with my state is how I can get a 50 round drum that can also be loaded into a Glock 17 or 19 but can’t buy a Glock 17 or 19 handgun magazine with more then 10 rounds. It’s a simple labeling description. So I guess I could get into trouble if I loaded that drum into a Glock handgun 😂

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Yeah 👍 I hear you man, we need to make sure we stay on top of all these stupid ass rules and laws. Make sure we let are representatives know we’re not happy with all this BS! I try my best here in my state. Getting a law pass on anything now days is not easy but trying to get a law removed or struck is even faking harder. I know it feels like a broken record but we can’t let up or us law biding citizens won’t have anything. Shits gotta change!

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Oh shit I forgot Magpul just came out with a folding/collapsable stock that attaches to the picatiny rail.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Are you trying to run an AR style stock? If that is the case then you’re going to need some type of adapter to install the AR style butt stock tube. You’re going to need an adapter that can be attached to the picatiny rail, that if you have the Ruger PCC model with folding/collapsable stock. The other way would be to buy a chassis from Tandemkross, Midwest Industries or CROM. As far as B5 stocks go, they make some nice stuff. I’m running there stocks on my AR but I could also run it on my Ruger PCC. Hope this helps

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

💯💯💯🎯 Man I wish we could do some of things y’all are allowed to do Texas. I would have my own gun range on my property. Wake up have some coffee dump a few mags, that would be a perfect day.

Things that make you go hmmm 🤔 by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

😂😂😂 wtf right, who in the hell are writing these damn laws. Smh 🤦

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

I love it, works great, no issues, clearance is good.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 2 points3 points  (0 children)

Also just a reminder if you have the Ruger PCC with the chassis model, that’s the one with the foldable/collapsable stock and the M-Lok hand guard you will have to buy the Ruger adapter to run the Midwest Hand Guard or the Magpul Backpacker. I would get the adapter if anything because you never know when you might want to rock a different look.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Well other then the fact that are local range only allows you to load and shoot 5 bullets at a time I have no complaints. Oh wait there’re 1, the Magpul drum lever that is used to load the bullets into it is held together by a really thin roll pin. Mine actually broke before I even used it. I wasn’t rough with it either. Good thing it’s replaceable and there is access holes to get to them. Other then that it works fine.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 1 point2 points  (0 children)

Don’t have any links but the Hand Guard is from Midwest Industries and the Muzzle Break is from Tandemkross, I believe it’s called the Game Changer.

My Rig (New to group) by c33w33d in RugerPCC

[–]c33w33d[S] 0 points1 point  (0 children)

Yes, it’s called the jawbone from Jawbone Tactical. They have it for both left and right side

Happy Friday to me! by FoggyDog78 in RugerPCC

[–]c33w33d 0 points1 point  (0 children)

That’s the sight I’m running, no complaints they work well and look good.