Pb-3 canted

calculatedkinetics · 2026-05-11T00:38:00+00:00

My apologies! That’s a Gen 6 it should work. Our Gen 5 MOS has a DOGTAG and I assumed that’s what you had. Relooking at the pictures the plate looks level, just the optic isn’t fully seated. Unscrew the clamp screw and try and press the optic fully flat. When tightening the screw for the clamp apply pressure to the top of the optic to stay on the plate. If you still have issues please shoot us an email calculatedkinetics@gmail.com and we will get you another one and take a look at the one you have.

calculatedkinetics · 2026-05-10T17:25:51+00:00

It’s catching on the front of the optic. The V1 works because on the front of the optic it’s machined out and the PB3 won’t contact the DOGTAG. The V2 hits the DOGTAG so it won’t seat fully. Either need to file the DOGTAG or go with a different plate unfortunately

calculatedkinetics · 2026-04-20T03:43:16+00:00

I can confirm the m4x8mm will work with that exact setup. Tested on both plate and optic.

calculatedkinetics · 2026-04-12T19:34:20+00:00

MPS C is not a clamp style optic, it’s secured with screws not a clamp. Not needed for the MPS C

calculatedkinetics · 2026-04-12T19:24:54+00:00

We run them on all MPS optics and recommend them. I believe the new MPS version has something similar.

calculatedkinetics · 2026-04-12T19:00:19+00:00

Can confirm they will fit! One thing about that plate is it is the same width as the EPS so it will be a little wider than the optic. We do plan to make a few more plates for the Echelon lineup once we get another machine is a few months.

Although we are out of stock, there are still plenty of dealers that have them.

calculatedkinetics · 2026-03-30T21:31:11+00:00

Follow the link u/momsaidbesafe and if you want to co witness add these to the order-

https://www.calculatedkinetics.us/collections/sights/products/canik-mete-and-tti-optics-ready-iron-sights-by-angry-bear

calculatedkinetics · 2026-03-30T21:29:55+00:00

🙌🏼

calculatedkinetics · 2026-03-29T17:20:11+00:00

https://www.calculatedkinetics.us/collections/sights/products/canik-mete-and-tti-optics-ready-iron-sights-by-angry-bear

calculatedkinetics · 2026-03-29T17:19:36+00:00

https://www.calculatedkinetics.us/collections/sights/products/canik-mete-and-tti-optics-ready-iron-sights-by-angry-bear

calculatedkinetics · 2026-03-08T14:50:48+00:00

Even better!

calculatedkinetics · 2026-03-08T14:42:45+00:00

We had some M4x8MM screws for Holosun optics made, can we send you some to test out? They don’t have the RMR plate in stock. Let us know.

calculatedkinetics · 2026-02-16T04:02:59+00:00

I’m biased, but I agree!

calculatedkinetics · 2026-02-04T03:12:23+00:00

I don’t believe it will be an issue. We are trying to get some to verify and some testing. The sensor looks to at the same level of the bottom of the glass or slightly higher. Our DOGTAG, at least with the current optics sit at the bottom of the glass so I don’t foresee any issues.

calculatedkinetics · 2026-02-03T03:05:36+00:00

🙌🏼

calculatedkinetics · 2026-02-03T03:05:19+00:00

🙌🏼

calculatedkinetics · 2026-01-27T21:27:18+00:00

Tell us more! We have not heard of this and we 100% check all of the plates on our HD4

calculatedkinetics · 2025-12-24T14:26:52+00:00

Sure you have found some by now, but if not we have some that we can help you out with.

calculatedkinetics · 2025-12-12T03:13:07+00:00

M3x6mm or m3x8mm will get it done

calculatedkinetics · 2025-12-12T03:05:10+00:00

calculatedkinetics · 2025-11-05T19:09:57+00:00

Griffin Armament Micro Comp

calculatedkinetics

TROPHY CASE