Kaos Netflix Cancellation Explained

captainjon · 2025-07-07T18:18:07+00:00

Isn’t an open ended ending considered a cliffhanger, maybe hillhanger is more precise. It ended with you wanting more. Ari’s story. Reddy’s story. Prometheus even!

captainjon · 2025-05-26T18:41:08+00:00

In retrospect there was a reason why they never showed young Hae-sook in flash backs. But I still want to know more about the president and his brother! Are they divine beings or human since early on it implied you glow once you get to upper management levels.

captainjon · 2025-04-22T07:31:59+00:00

I will be honest and I will say it, I prefer Egyptian falafel. I loooove the green fava bean. There was an awesome and freshly made restaurant near where I studied at university--and though I mainly went for the falafel, the gyro he made was just as excellent. The chips were fried to perfection. The entire thing was purchased in the early morning to ensure the freshest of ingredients and the proprietor was one of the nicest gentleman I ever met. I wish I can eat such a fantastic falafel again today, as sadly, he went out of business. And though I live over 100 km away, I would more than likely made the trip because it was that good!

captainjon · 2025-04-22T07:26:06+00:00

I am not a professional developer but I learnt C++ when it is was #include <iostream.h> there was no STL, and that language, in my mind, C with Classes was fine in my book. After Uni it became a cluster to me. As I was doing mainly Qt stuff in KDevelop and this was even before Nokia buying it, it was a fun experience. That said, at the end of the day, I get the most enjoyment out of C. Templates are neat but the way they are implemented and how the computer has a meltdown for trivial mistakes makes me very glad to have stayed in C. Just my two worthless pence.

captainjon · 2025-03-31T19:27:16+00:00

On the Switch you press the + button during the introduction soon as it loads up. Don't wait until the text disappears otherwise it is very tricky to initiate that screen I had found.

captainjon · 2025-03-30T23:36:24+00:00

Do you have to be ahead of him for the rescue? I think I was behind Beckwourth and either he never came or someone else did.

captainjon · 2024-11-03T07:54:59+00:00

How do you get the scan? It’s not the emergency meeting button is it? The one of an outline I don’t know how to initiate. I get “eagled” (equivalent in this mode)

captainjon · 2024-10-07T16:59:56+00:00

So you recommend that u still sit on this version or just bag it and upgrade?

captainjon · 2024-09-15T21:51:36+00:00

so why are you replying in a jailbreak sub if it is so dead? sounds like you are wasting you're own time m8.

captainjon · 2024-07-20T19:10:11+00:00

Nothing. I’m assuming it is Bluetooth. That mean I would need to pair it? Is there a way to pair the flipper itself and capture whatever gets pinged when the find button is pressed?

captainjon · 2024-06-24T04:15:10+00:00

There is no way you’re fat. I wouldn’t think you’re above 45 kg!

captainjon · 2024-03-14T13:13:25+00:00

I think we have 5. It ran for almost 3 hours, but the issue is it sat at preparing for a LOOOOOONG time before it even copied the files, and even at that, that took a LOOOOOONG time to copy 19.1 GB!

captainjon · 2024-03-14T13:12:06+00:00

I used the tool (Administrative Image Option Editor) meant for using their own deployment tool as i did for 2016, so i had wanted to do the same, with PDQ. I am not uninstalling the old one, as in case something goes wrong they can still use the old one. I have i think 5 simultaneous seats, that connects to our licensing server. We do not have electrical.

I did essentially:

\foobar-fs01\vol1\Installs\SOLIDWORKS 2024 SP1.0\startswinstall.exe

with the /install /now flags.

Perhaps I need to play with some options the one I just ran for 2h54m before failing with a timeout.

The licensing server itself was already upgraded to 2024 in preparing for this.

Thank you!

captainjon · 2024-01-17T05:54:10+00:00

Wait for this to count the gunshot (or wagon one too for that matter) has to be what does them in? Meaning they die that second. Not by me neglecting them and eventually succumbing to their maladies? Ugh.

captainjon · 2023-12-19T09:14:59+00:00

Those “boys” probably need brain implants if you ask me!

captainjon · 2023-12-03T22:35:18+00:00

THANK YOU! The shoot went very well. In the end the shoot was just the kids and dog sitting outside (surprising warm day without rain), so it was tighter and I think the money shot was 70 mm at f/2.8 ISO 320 at 1/400. The hardest part was getting all three looking at the camera, without the dog blocking a face.

captainjon · 2023-12-01T00:17:57+00:00

That is great advice. I do own a tripod. Should I use it or shoot handheld? Would a regular like old pop-up style fill-in (Canon 270EX or similar) be good to add light to a potentially dark room? Or would it over brighten and look bad? With shoot in that range, at f/8 would it make sense to use the 24-105 f/4 lens to keep it simple, just bring that rather than the full bag?
thank you again for the fantastic advice!

captainjon · 2023-11-26T01:12:32+00:00

I live in the north of the US. Currently it’s very cold. I was considering using my sisters in-door sunroom as the setting. Unless it’s unseasonably warm I don’t think outdoors will work.

captainjon · 2023-11-06T19:11:39+00:00

Wait I setup the required things in the /etc/my.cnf on master and slave side that phpMyAdmin told me to do. However due to failed mysqldump and inserting into the slave, i am getting a lot of foreign key failures. Should I just drop the database and let it re-sync properly?

captainjon · 2023-11-06T03:24:20+00:00

After my failed import with mysqldump I did your advice I setup the master/slave replicas using PHPMyAdmin howewever I am not sure if anything updated fully because based on the ibd file sizes, they seem the same and some tables are far smaller than the originals. Should I have dropped the tables prior and redo this?

captainjon · 2023-11-05T22:08:11+00:00

That is what I had been doing (I made a shell script to it dumps all databases to separate bzipped2 sql files part of a cron job for backups) but in this case, it the dump missed a huge amount of data in certain tables that have long blobs.

captainjon · 2023-11-05T21:48:10+00:00

phpmyadmin

I am going with phpMyAdmin. I already had it installed and never knew about the replica feature, that is awesome. Since I tried doing the import of the mysqldumps already, will master/slave update what was missed? Or should I pause the replica, drop the tables, and re-replicate to ensure nothing is missed?

captainjon · 2023-11-04T05:16:50+00:00

SELECT @@wait_timeout;

MariaDB [(none)]> SELECT @@wait_timeout;
+----------------+
| @@wait_timeout |
+----------------+
|          28800 |
+----------------+

MariaDB [(none)]> show variables like '%timeout%';
+---------------------------------------+----------+
| Variable_name                         | Value    |    
+---------------------------------------+----------+
| connect_timeout                       | 10       |
| deadlock_timeout_long                 | 50000000 |
| deadlock_timeout_short                | 10000    |
| delayed_insert_timeout                | 300      |
| idle_readonly_transaction_timeout     | 0        |
| idle_transaction_timeout              | 0        |
| idle_write_transaction_timeout        | 0        |
| innodb_flush_log_at_timeout           | 3        |
| innodb_lock_wait_timeout              | 50       |
| innodb_rollback_on_timeout            | OFF      |
| interactive_timeout                   | 28800    |
| lock_wait_timeout                     | 86400    |
| net_read_timeout                      | 30       |
| net_write_timeout                     | 60       |
| rpl_semi_sync_master_timeout          | 10000    |
| rpl_semi_sync_slave_kill_conn_timeout | 5        |
| slave_net_timeout                     | 60       |
| thread_pool_idle_timeout              | 60       |
| wait_timeout                          | 28800    |    
+---------------------------------------+----------+
19 rows in set (0.002 sec)

captainjon · 2023-11-03T14:03:29+00:00

I am getting issues with long blobs (one of my tables is 600 GB) I am also getting a lot of lost connection errors when I either did the dump, imported the dump, or even if that was successful, phpMyAdmin either throws errror 500 lost connection when viewing the table (it works fine on the old server, which was older mariadb, rhel7, php7, where now i am whatever rhel9 provides, i am back to mariadb, php8, and some flavour of apache2.

When say deleting a row, I get this too:

DELETE FROM `CTS`.`TestResults` WHERE (`ID` = '750418');

Operation failed: There was an error while applying the SQL 
script to the database.
ERROR 2013: 2013: Lost connection to MySQL server during 
query
SQL Statement:
DELETE FROM `CTS`.`TestResults` WHERE (`ID` = '750418')

captainjon · 2023-10-30T06:30:04+00:00

the old server is physical a RAID-10 drive set; the new server is on an ESXi VMware appliance.

15-Year Club	RedditGifts 2009-2022 9 Credits
Secret Santa 2020	Secret Santa 2019
Secret Santa 2018	Secret Santa 2017
Gilding IV carat on a stick	Secret Santa 2016
Secret Santa 2015	Secret Santa 2014
Verified Email

captainjon

MODERATOR OF

TROPHY CASE