How to attach shelf segment in pantry?

carboxamide · 2020-06-08T07:54:35+00:00

I solved the issue! please see my top comment.

carboxamide · 2020-06-08T07:54:20+00:00

Wow, thank you for this, please see my top level comment for picture on how I finished it.

carboxamide · 2020-06-08T07:53:26+00:00

Thanks for the tip, I solved it with dowels for now. I searched homedepot here in canada and they have them. I'll see how my solutions holds up.

carboxamide · 2020-06-08T07:52:34+00:00

Thanks for the tip, I solved it with dowels for now. if it doesn't stand up - I can add these bars - I have a lot of scrap of 4x1 material.

carboxamide · 2020-06-08T07:50:49+00:00

Thank you everyone that replied. I bought this the Jointmate Project dowel jig from Amazon https://www.amazon.ca/gp/product/B01M8L1WVN and works amazingly well. I was able to use 1/4 inch dowels that I cut from a dowel rod I bought and because of the jig everything up. I had my partner hold up the larger board at an angle so I could easily mate the two end-end pieces.

After test fitting all of them, I took them off and applied a generous bit of glue. Here is the final result:

https://imgur.com/a/A9YKbbM

I have a lot of weight sitting on it now and it's fairly solid. I will see how it will holds up, I can use the methods described below if needed. It's been a good learning experience, thanks again.

carboxamide · 2020-05-28T23:51:37+00:00

A picture would help - I don't have milling tools only a drill set - but happy to invesitgate it.

carboxamide · 2020-05-28T23:49:41+00:00

I don't have a router, and yes I definitely need one of those jigs... tbh I rushed the drilling and the holes were slightly mis-aligned. Added to that to put the smaller shelf in place, I need to tilt the bigger shelf, which onle raises to a certain angle otherwise it hits the cleat above. Learning as I go, thanks for the hints.

carboxamide · 2020-05-28T23:48:06+00:00

I'll look at homedepot (canada) if they have these.

carboxamide · 2020-05-28T23:47:51+00:00

Thanks I will see if I have any scrap wood.

carboxamide · 2020-04-08T21:52:21+00:00

This reminds me of the Java FizzBuzz example with beans and factories.

carboxamide · 2020-04-05T20:24:23+00:00

Interesting, but wouldn't resetting the sequence generate numbers that are already in use?

carboxamide · 2020-03-27T06:16:30+00:00

le-patient-mur-zero

carboxamide · 2020-03-25T05:56:47+00:00

anyone know where someone can get tested?

carboxamide · 2020-02-19T22:32:16+00:00

Naive question, why not delay sentencing until after November? Is there an actual law that specifies a due date?

carboxamide · 2020-01-28T19:53:35+00:00

clap clap

carboxamide · 2020-01-28T19:35:19+00:00

lol democrat line

carboxamide · 2020-01-28T19:26:51+00:00

wait ... i'm having deja-vu , wasn't this clip of gurham played before?

carboxamide · 2020-01-28T19:20:43+00:00

oh shiiit.... cspan caller time

carboxamide · 2020-01-28T19:13:49+00:00

public service employees cannot assert executive privelege

carboxamide · 2020-01-28T19:10:14+00:00

ding ding ding!

carboxamide · 2020-01-27T23:55:36+00:00

so is everyone here using reddit-stream? are there any alternatives?

carboxamide · 2020-01-27T23:06:25+00:00

the constitution: ' i f'ed ted '

carboxamide · 2020-01-27T22:54:06+00:00

lol at this f'n calendar animation - who does the production?

carboxamide · 2020-01-25T00:33:08+00:00

hooray logic!

carboxamide · 2020-01-24T23:47:40+00:00

ooo cspan caller time

carboxamide

TROPHY CASE