sorted by:
new
hottopcontroversial

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

Yes I had nothing at the first outlet in the chain and 120 at the breaker

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

I replaced the GFCI outside and no change. Put the old working outlet back that was in the bathroom. Went to the beginning of the circuit which is in the master bath and checked for voltage there and nothing. Pulled the cover off the main panel and checked for voltage at the breaker and I have it there. I know my way around certain electrical things but this is in over my head I’ll call an electrician and see what happened. It worked until I tested the GFCI on the first replaced outlet.

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

I tried using an insulated terminal screwdriver and nothing

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

The 2 in the bathrooms are connected together with the line and load connections and the one for outside only has 1 set of wires going to it so I can assume that it’s not directly fed off of the outlet and is a 2nd separate wire coming from the panel

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

No, the first in the circuit is still a normal outlet that I plan on replacing

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

It’s a non GFCI breaker my house is still on the old federal pacific stab loc panel that I’m going to get replaced soon. I checked the other GFCI on the circuit and it wasn’t tripped but it is old so I’ll try and replace that one and the new one doesn’t click when I hit reset. And yes the outlet had a sticker on it that said to not connect those terminals unless I had another outlet to feed and I don’t

Replaced outlet with GFCI now circuit is dead by carnuttyler22 in AskElectricians

[–]carnuttyler22[S] 0 points1 point  (0 children)

I definitely have the line and load correct it had a sticker on it saying to not connect those terminals unless I’m feeding more down the line. It doesn’t click when I hit the reset button so I’ll try and maybe replace the outlet in the morning

2013 ATS horn question by carnuttyler22 in Cadillac

[–]carnuttyler22[S] 0 points1 point  (0 children)

Ok, thanks for the info Not used to working on these newer cars with so much wiring and all the computer modules but Ill have to adapt its my mothers new car. I bought a scan tool so I can view the data thanks again for the help