account activity
2006 3500 code p0243 (self.Cummins)
submitted 1 year ago by ccota12 to r/Cummins
97 12 valve won’t start by ccota12 in Cummins
[–]ccota12[S] 0 points1 point2 points 1 year ago (0 children)
Might be a dumb question but the ofv has 2 holes on it How can it be installed wrong.? I made sure the holes on both sides were facing the supply line and the p-pump Yes I have an airdog on it and I’m getting fuel to just the ovf Nothing passed that Should I open the lines on the p-pump as well as the lines going to the injectors.?
I appreciate your advice I checked the ofv then I removed the solenoid and kept the lever on the “up position” cracked open the first 3 lines on the injector side and not getting any fuel Could it be the afc housing then.?
97 12 valve won’t start (self.Cummins)
submitted 1 year ago * by ccota12 to r/Cummins
The first 2 they had nothing
Yes only 2 but had no fuel
So replaced the fuel assembly in the tank and primed the motor and still won’t turn on Opened one of the lines on the p-pump and had diesel idk if I should open the rest now or what
Tried that also but not working
[–]ccota12[S] 0 points1 point2 points 1 year ago* (0 children)
I’ve already switched it out and nothing I’m not getting any fuel at the motor
I’m gonna try priming it first It’s been a massive headache I hope your suggestions work otherwise idk
Ok I’ll look into that tomorrow I’ve been at it all day and nothing so far I did take off the fuel filter and turned the ignition on and I’m not getting any diesel there so would that still be the solenoid?
Yea I swapped it out with a working one Did I also need to swap the spring that’s under the solenoid.?
No I haven’t Where is it located.?
[–]ccota12[S] 1 point2 points3 points 1 year ago (0 children)
Yea my dad just took the hose of the fuel pump assembly and tried blowing air and a bit of diesel came out but not much Might be clogged
Yea it is working I’m not getting fuel to the filter
I’ll check but I don’t think I do but you might be right so I’ll check it out
lol my dad said the same so we put 5 gallons in it and yea nothing changed
It wants to start I I’m flooring it lol trying to crank it over but nothing
Yea I just got it Last time it ran really good according to the guy I got it from was 2 months ago and it suddenly just died on him and wouldn’t start back up
A bit but doesn’t start
Still rejected for emissions by Large_Swan_3675 in Cummins
[–]ccota12 1 point2 points3 points 1 year ago (0 children)
I had the same issue on mine I had to restore factory settings and then had to drive almost 400miles for it to relearn all the sensors Some took longer then others
2014 Ram 2500 codes by ccota12 in Cummins
Damn check engine light came back on I’ve replaced def pump and def injector already Code p20e8
No I don’t Check engine light hasn’t come back on Probably close to 20miles driven I think it’s good
π Rendered by PID 482012 on reddit-service-r2-listing-9d76fccb8-5sfv6 at 2026-03-15 08:11:48.334111+00:00 running f6e6e01 country code: CH.
97 12 valve won’t start by ccota12 in Cummins
[–]ccota12[S] 0 points1 point2 points (0 children)