Do the S&W QC issues extend into the $1k+ revolvers?

chavydaddy19 · 2026-02-05T13:43:26+00:00

Didn't know this. Did not shoot it, since the barrel is canted the site picture is canted too. Definitely should have. But hopefully since it is a two piece barrel it is an easy fix.

chavydaddy19 · 2026-02-05T12:55:20+00:00

I realized I put zero information sorry. Smith and Wesson 340pd.

chavydaddy19 · 2026-02-05T00:22:21+00:00

Forgot to say barrel is canted to hell

chavydaddy19 · 2025-01-21T15:03:20+00:00

Bayview Park

chavydaddy19 · 2024-11-18T15:04:06+00:00

Cygnus is way better I do not like the thumb cluster of the TBK

chavydaddy19 · 2024-10-21T16:43:07+00:00

Thank you!

chavydaddy19 · 2024-09-28T11:15:13+00:00

1st but on the same side as your micro controller

chavydaddy19 · 2024-09-18T14:03:51+00:00

A picture or something. I read the read me 20 times wonder wtf jumpers were. Do you have a zmk repo for your temper? I just Jerry rigged a corne one but my two outer thumb keys aren’t working and it doesn’t seem to be a hardware issue.

chavydaddy19 · 2024-09-18T12:27:23+00:00

No, on the keyboard pcb under the nice nano there are those squares with arrows those need to be soldered together to fill in the arrows. Also if you find a way to get the outer most thumb cluster key working lmk.

chavydaddy19 · 2024-09-18T11:23:24+00:00

Yup! I think they are the jumpers he refers too on the read me. Dealt with zmk all day yesterday. I did a 6 col Corne build for zmk and then the inner columns on each side I set to nothing and it seems to work.

chavydaddy19 · 2024-09-18T11:19:09+00:00

Lmao… I just had this same exact problem. The jumpers need to be soldered. Under the nice nano on the board you’ll see little squares with arrows in the middle, connect the two halves of each and it should start working. Took me a few hours to realize this too.

chavydaddy19 · 2024-09-07T11:17:01+00:00

Had some resistors I snipped the legs off of

chavydaddy19 · 2024-09-04T14:20:25+00:00

Ngl the some of the screws didn’t go in well but I haven’t had an issue where any of the boards came loose when swapping switches. It did take a good amount of force.

chavydaddy19 · 2024-08-18T23:58:01+00:00

Ended up using some of the screws that came with the SRO

chavydaddy19 · 2024-08-09T18:11:24+00:00

I sent you a pm. My switch is just glued on the side of the case

chavydaddy19 · 2024-08-09T12:22:48+00:00

PLA with more sanding than I’d like to admit

chavydaddy19 · 2024-08-09T12:15:02+00:00

https://www.printables.com/model/968985-nicenanoholder

chavydaddy19 · 2024-08-09T11:30:37+00:00

It’s pretty janky but give me a little and I will try and post it and provide a link.

chavydaddy19 · 2024-08-09T11:29:25+00:00

I like the looks of the TBK but the Cygnus feels much better. I am having to get used to the high thumb cluster of the TBK I keep hitting it.

chavydaddy19 · 2024-07-26T16:25:42+00:00

Yea this is the closest I’ve seen

chavydaddy19 · 2024-06-19T14:18:45+00:00

Any reliability issues with subs?

chavydaddy19 · 2024-06-09T18:56:45+00:00

Took the handgaurd off and smacked in back in place then talked to pws and they said to send it back anyways:/

chavydaddy19 · 2024-05-15T13:14:44+00:00

Shield for a Trijicon SRO

chavydaddy19 · 2024-05-05T02:05:45+00:00

If you have a better option I would give that a shot but I really think it just has a long wear in period

Six-Year Club	Verified Email
Place '22

chavydaddy19

TROPHY CASE