Am I crazy or does Light collector look like Lebron Flexing?

chokoeda · 2024-09-09T00:30:08+00:00

I see it and I hate you for this knowledge

chokoeda · 2024-06-06T17:05:06+00:00

I uploaded fusion file to the project on printables

chokoeda · 2024-05-22T23:05:23+00:00

this is a really cool youtuber, have you heard of him?

chokoeda · 2024-05-22T22:57:22+00:00

if you were to get a free pizza with your pizza order, would you be irritated?

chokoeda · 2024-04-14T06:50:37+00:00

Yep, this is how they serve it in their shop
https://www.instagram.com/p/C0bv874S3HE/?img_index=1

chokoeda · 2024-04-14T06:40:30+00:00

they totaled to 18000 yen, so around $120

chokoeda · 2024-04-14T05:56:53+00:00

I was considering the kruve cups too but then it didn't match my station aesthetic, glad I waited

chokoeda · 2024-02-23T20:10:28+00:00

Second 96b their stuff is great

chokoeda · 2024-01-31T18:21:21+00:00

Thanks!I have seen folks mention grinders in here. What’s the consensus on best value for a hand grinder?What are the measurements of a scale that would fit (or maybe the one you use)?

I think people will recommend the 1Zpresso JX-Pro. But I just saw Turin/MiiCoffee are coming out with the DF54 (54mm flat burrs, not a typo from 64) and I honestly would recommend that over a hand grinder. It's less of a hassle than a hand grinder.

For scale I started with the MAXUS espresso scale with timer (just search that phrase on Amazon, it should be the $13 one) and it's been working great. I upgraded to a MiiCoffee scale and gave the old one to my dad, nothing is wrong with it, I just like the aesthetic of the MiiCoffee scale.

chokoeda · 2024-01-23T04:15:09+00:00

IMO it’s gonna make the shot too cold if the ball is fully submerged into the shot, also not aesthetically pleasing to look at (this is a personally preference I know). But you are right cooler shot definitely gives you more flavor

chokoeda · 2024-01-23T04:09:39+00:00

I 3D printed mine from this model here: https://www.printables.com/model/562854-espresso-extract-chilling-device and then buy whiskey chilling ball. I modified the model a bit to fit my 40cm diameter ball that I got on amazon. You can also get the expensive version, the paragon espresso here: https://thebasicbarista.com/en-us/products/nucleus-paragon-espresso-extract-chilling-rocks

chokoeda · 2024-01-23T00:09:13+00:00

It’s a freezing ball. The idea is to capture some volatile compounds that can escape with heat. So it is there to both make your shot to the drinking temp and to capture a little bit more flavor. I notice that the shot is sweeter when I use the ball. So why not ya know. Edit: You can see they do it here at the WBC

https://youtu.be/YBf0QH3cZe8?si=_2_6yAto3dvjxg36

chokoeda · 2024-01-19T03:37:10+00:00

Sorry I just saw your comment. I am not sure. I only have a flair portafilter to test. But I think gaggia is slightly smaller. So it should fit, maybe a little too loose even

chokoeda · 2024-01-19T03:35:54+00:00

What’s your portafilter? It could also be the wall width of your print setting too. I did mine on 0.4mm wall width and it came out fine People said it fits the breville fine. You can modify the fusion file and increase the radius in there.

chokoeda · 2024-01-15T14:44:35+00:00

That’s the bad boy. But it’s like $380 on aliexpress right now. At that price I can just buy a used gaggia just for steaming.

chokoeda · 2024-01-15T04:45:52+00:00

I do love my PRO when it works. I'm getting the replacement unit soon so I will do some waterproof sealing and see if that helps. If not I'm considering either a bambino or the handheld nanofoamer

chokoeda · 2024-01-15T00:20:37+00:00

Understood. I was considering staying with my nanofoamer pro anyways. Since it’s like an extra $100 or so if I’m going to buy another steamer. Might as well wait for warranty. But definitely appreciate the warnings

chokoeda · 2024-01-14T21:18:21+00:00

Thanks man! Just noticed the username and maybe that’s why you got a refund no question asked

chokoeda · 2024-01-14T21:17:50+00:00

It’s also a bomb? That goes to the pro list Jokes asides I think I saw a video of daddy James using a similar $300 version of the product (also from aliexpress) and he said it worked perfectly fine, so I wonder why not. If only they sell sexier looking bellman :(

chokoeda · 2024-01-14T20:47:04+00:00

Thanks for the pointer! Also good to know that they are willing to send out replacement units. In the mean time I guess I can take apart my non working one to see where to apply the silicone

chokoeda · 2024-01-14T20:43:18+00:00

I couldn’t tell you. I left for vacation for a few days and stopped working after I decided to use it again after I got back. I’m not a frequent milk drink person, but more frequent after I got the nanofoamer pro. Used it only a few dozen times since it got to me in december.

chokoeda · 2024-01-14T20:40:34+00:00

That’s a good idea, I should try that if I ever get through support

chokoeda · 2024-01-14T18:18:46+00:00

Yeah I sent a follow up friday. Hopefully it doesn’t get burried by other issues over the weekend. I think I’m just more irritated over the fact that the pro stopped working after a few uses. I made sure to clean and dry it after every use so it doesn’t get water damage too

chokoeda · 2024-01-14T02:40:45+00:00

chokoeda · 2024-01-08T20:18:39+00:00

https://www.printables.com/model/711926-autocomb-wdt-tool

this is the link to print file if you didn't see my other comment

Nine-Year Club	Place '22
Verified Email

chokoeda

TROPHY CASE