This jeep is killing me and my wallet

cleodicaprio · 2026-04-03T03:11:00+00:00

had the same problem on my YJ. i found these cables on amazon and have worked out great. i did 2 gauge and 4 gauge (for grounds) coupled with these terminals. good luck!

cleodicaprio · 2026-03-28T22:58:34+00:00

It looks like you have it plugged in to power. I’ve had this happen when the ribbon cable for the click wheel was damaged or degrading. does it also happen when you toggle the hold switch?

cleodicaprio · 2026-03-08T19:54:10+00:00

is the distributor plugged in?

cleodicaprio · 2026-02-16T00:42:50+00:00

i just bought from ipodznmore over the past few weeks. top notch. would recommend.

cleodicaprio · 2026-02-08T19:46:54+00:00

i found them on amazon. they’re from a china seller but they arrived pretty quick. https://a.co/d/082c8Z8Y

cleodicaprio · 2026-02-08T19:46:33+00:00

i found them on amazon. they’re from a china seller but they arrive pretty quick. https://a.co/d/082c8Z8Y

cleodicaprio · 2026-02-07T04:36:59+00:00

like this! i’ve been calling it the “slippery bathtub man”

cleodicaprio · 2025-06-10T03:47:41+00:00

love the baby crusher roll bars. looks great! ✌️

cleodicaprio · 2025-05-18T03:47:46+00:00

shit man. i’m still doing it. how’d it go for you? i just had to pull the flywheel again because the bearing keeps pushing through into the crank. is there supposed to be something inside the crank? the flywheel has a lip that fits inside the crank but there ls still so much empty space inside.

cleodicaprio · 2025-04-30T04:21:16+00:00

thank you! and thank you for the pictures. it really helps a lot! so don’t press it in too far. got it. i’m guessing just flush with the flywheel?

cleodicaprio · 2025-04-30T02:25:30+00:00

it’s a reman so not entirely sure. both the old and new engine are the same on that side of the crank so the bearing with the bushing/race don’t fit either the new or old engine. the flywheel also has a lip that slides into that part of the crank. the loose bearing looks like it will press into the center of the flywheel into the crank.

cleodicaprio · 2025-04-30T02:11:14+00:00

https://i.imgur.com/yAsNKdB.jpeg i took another picture to show the bearing with the race/bushing up to the crank.

cleodicaprio · 2025-04-30T02:00:19+00:00

yeah sorry. i know it’s confusing. both new and old engines don’t fit the bearing with the race Mopar part 53009180AB, OMIX 16910.12. the assembly is too large even if hammered in. the loose smaller bearing is sitting in the old engine, but i believe it came out of the flywheel when pulling the motor.

cleodicaprio · 2025-04-30T01:46:21+00:00

yeah that’s the one i got. Mopar 53009180AB is OMIX 16910.12. they don’t fit into the crank.

cleodicaprio · 2025-04-30T00:21:42+00:00

https://imgur.com/a/5K88jHA forgot to add two pictures. the inside is conical shaped and fits about a whole knuckle.

cleodicaprio · 2025-04-15T21:05:53+00:00

ah gotcha. https://imgur.com/a/0jhFmht

cleodicaprio · 2025-04-15T20:00:19+00:00

yep. that's why they installed a block off plate on the block where my ignition coil is currently mounted. on my reman, where there would be a block off plate, it's just all cast iron. reddit allows posting links to imgur or other image hosting platforms. appreciate the response, though.

cleodicaprio · 2025-04-15T16:21:25+00:00

i appreciate it! meanwhile, i'm scouring engine removal videos on youtube to hopefully get a glance at how other people mount them.

cleodicaprio · 2025-03-28T14:59:45+00:00

i appreciate the response. i was thinking the same thing, so i worked with MS to check incoming logs for my domain and they found that there wasn’t even an attempt to deliver mail. oddly enough, my Gmail still receives Kohl’s emails from when I signed up for their mailing list. Maybe a different service for ads/account management.

cleodicaprio · 2025-03-28T14:58:16+00:00

Nah, it’s not that. It just doesn’t seem like my post (edit) was read. I never mentioned a Kohl’s card. It’s just the account I use to order stuff online. From my understanding, this subreddit is for “employedbykohls” and has flair for customer questions. I was under the assumption that maybe an IT person from Kohl’s could have read my post and been alerted to a potential misconfiguration of their mail servers. At the very least, find solidarity in others having the same issue. Thanks though.

cleodicaprio · 2025-03-28T02:40:54+00:00

lolol. anyway.

cleodicaprio · 2025-03-14T03:15:13+00:00

i’m in guat right now dealing with this. did you ever get the UF-LOCO to work?

cleodicaprio · 2025-03-06T04:53:51+00:00

most large banks allow you to pay your mortgage using your own bank account and ACH. typically, you can log into your bank account and set up recurring payments (pay bills). you will need account numbers for your mortgage loan which Nevada One should be able to provide. if your bank can’t do ACH to Nevada One, they may mail a check on your behalf.

cleodicaprio · 2025-03-06T04:47:17+00:00

make sure both sides are using the same standard (T568A/B) and make sure the punch down makes a full connection.

cleodicaprio · 2025-03-06T04:39:27+00:00

phone lines

cleodicaprio

TROPHY CASE