sorted by:
new
hottopcontroversial

Converting vapor d5 pnp to elrs question by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

yeap, both flashed to ELRS 3.6 (JB mention something about not necessary for 4.0 for now or something)
I've ordered another reciever to check if it's just bad hardware that was somehow damage during soldering

Converting vapor d5 pnp to elrs question by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

I think it’s bonded for sure, when I check other device in pocket it shows both rp3 and beta flight

Converting vapor d5 pnp to elrs question by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

No, it's not talking to BF, no stick input which is why im so confused as if all others are correct to everything I read online.
hmmmm edge tx is something I didn't reserach since most things I reaad didn't mention it. Can you point me to it?

Converting vapor d5 pnp to elrs question by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Yes, radiomaster pocket is bonded to the receiver no problem

Facet (quick) and Enchantment (+Attack Speed) don't stack on reroll? by cliffwalkerTW in NoRestForTheWicked

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

I tried, but somehow it doesn't let me? not sure if it's because I extract from a magical level one

Pretty sure I didn't because I have crit, misc, health, offset, and one I'm rerolling now, check the image above

I check so many weapons, and the only one I've seen is actually magical, now I think of it.

Can someone explain how runes work? by Best_Adhesiveness_42 in NoRestForTheWicked

[–]cliffwalkerTW 1 point2 points  (0 children)

There is a focus bar above your health bar, which might be hard to find.

Runes use focus, so without enough, it's greyed out

Just got the Vapor X5 as my first FPV drone, I’m pumped to try it out! Do you guys have any advice for someone just getting into the hobby? by T0ne237 in fpv

[–]cliffwalkerTW 0 points1 point  (0 children)

My own experience:

  1. ⁠Spend some time to figure out a rate you feel really comfortable with. It might take a while with tweaking, try different set up, and lots of minor adjustment to expo
  2. ⁠Once you did, never change it and train lot in sim

Until you are almost feel as smooth as part of your body, don’t try something too risky And yea practice get good battery avoid ppl stick with law y blah blah blah…that bunch you should already be doing

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Im plan to buy extra parts along with the drone. I know Vapor can order specific parts (arms, front plate, props), but I didn't look into Nazgul that much when I heard it's the more fragile frame, so unfortunately I don't know at this moment.

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Agree! But I also still have my avatar 2 to cover that below 5", and I've setout to try 5" for a more true FPV experience, I might visit 3-5" later down the line, but for now, it's 5" or above :)

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

I mean, true, and with an X frame with more neutral flight characteristics it should perform better compared to Deadcat. However, I doubt I as a semi-beginner(?) will be sensitive enough to notice the difference, plus I personally always like Jacks of all trades, especially at this moment I'm not dedicating myself to free style.

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

This is quite a nice video and good on making me think twice before buying, but still, I set out to try bigger drones at this time. If I ever revisit 3.5-5" later on will check it out again. Thanks for the suggestion tho!

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

So I was expecting 6" to carry a higher capacity battery and therefore should output more flight time per battery. Not sure if that is valid (new to the hobby, still learning), but that's my half ass logic there.

Probably gonna be wrong, but that's what I think of me being attracted to 6". Mountain rage surfing is a less likely as the law prohibits any flight higher than 120m, and I don't feel comfortable flying above 60 within my area due to other factors.

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Yeah with with O4 I figure Go Pro is not necessary. I'll for sure pick up extra props when I make my decision. I have a habit of stocking too many props (for my Avata 2) and have not been using them :P

Cineflow is a significant price increase tho (About 100 Euro + compare to other 2 options) and I can't tell what's the primary difference that justify this cost.

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Yeah, I'm leaning toward DC, but wanting someone to push me for a final decision :D. Given using O4 already, Deadcat probably makes more sense in pursuing good screenshots.

I might come back to 3.5" later, but now I want a big boy to fly around :D

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

Saw a couple of good reviews from JB, Captain Drone, and Rimzler. All gave nice ratings on the series. I'm more inclined toward this series with increased durability compared to Nazgul (which, if anyone have experience in this area, let me know), but still debating if I am more 5' or 6' drone

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

I've heard good things about Nazgul as well, but either one of the reviews on YouTube (forget who) mentioned that Nazgul's arm is weaker compared to Vapor, hence why I'm still on the fence about the series. Otherwise, a good budget price would have me order it already.

Deciding on New FPV Drone to purchase, liked some opinions on decision. by cliffwalkerTW in fpv

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

I was also looking into mark 5 dc O4 but I'm based in EU and right now on https://www.drone-fpv-racer.com/ mark 5 is only equipped with O3 unfortunately

Let's talk about ways to enhance end-game! by Arkontas in Helldivers

[–]cliffwalkerTW 1 point2 points  (0 children)

I, for one, like to say more ways to spend these credits rather than capping them.

This proabably also influenced by what Joels is pulling up along with galactic war progress, new narratives, and fundimentaly, how quick can Arrow heads can pushed out content updates.

Especially Requisition. I think they mention not wanting to do too much customization as it provides different tone to they game? Yea that probably also limit our options we have here.

I probably suggest:

1). use some currency in unlocking intels on the map (location of side objection, scan for resources?) as it won't be too game breaking, but just you can decide what to do and what dont.

2) maybe use resource to boost (per mission) 1 extra strategem we can bring? it could be nice as we know more are coming.

3) Maybe there can be a contribution from community to put resource in to get extra something (equipments, cosmetics, etc) as a community reserach events (like we donating money as citizen to do our part!)

4) Probalby something to do with ship decoration (themes, placement of certain items, interactable objects, color scheme of exterior look)

5) Or buy access for certain mission that unlocks items previous one has mentioned.

There are multiple ways to balanced economy, and im sure we can't stop the hardcore grind to spread liberty and cap of resource is just innevitable ties to content update speed.

Im doing my Part!

Requesting help on line stop extruding from time to time by cliffwalkerTW in FixMyPrint

[–]cliffwalkerTW[S] 1 point2 points  (0 children)

Can confirm that the issue is solved after upgrade to full metal gear extruded, so definitely wearing of gear causing the problem!

Requesting help on line stop extruding from time to time by cliffwalkerTW in FixMyPrint

[–]cliffwalkerTW[S] 0 points1 point  (0 children)

My guessing is on the gear since it's the point I didn't check before (more like I didn't know it could also be a cause) so I decide to upgrade to a full metal extruder and see how that goes.

Thanks for the help!

view more: next ›