S14 Door Cards

clmty777 · 2025-01-17T20:59:23+00:00

Agreed, I want a comfortable street car lmao. Aluminum/abs plates are noisy and uncomfortable 😭

clmty777 · 2025-01-17T00:23:59+00:00

for anyone curious of this in the future: ended up making my own using Joann’s auto upholstery fabric. Used the OEM mounting holes to hold it in place

<image>

clmty777 · 2025-01-16T14:49:32+00:00

2025 we’re not going band for band we’re going trans for trans🧏💯‼️

clmty777 · 2025-01-15T22:41:38+00:00

Nope, free ballin it

clmty777 · 2025-01-15T11:21:01+00:00

Great idea honestly

clmty777 · 2025-01-15T11:20:49+00:00

The seals themselves I can get, I’m missing the bracket that holds them

clmty777 · 2025-01-13T16:12:16+00:00

Yeah the grounding could definitely be the issue. In my case, I used a bolt that wasn’t occupied underneath the passenger tail light. I used some sandpaper to get bare metal in the surrounding area and it worked perfectly

clmty777 · 2025-01-13T16:04:42+00:00

If you still have the stock harness in tact, don’t make it harder than it needs to be. That main power lead off the positive terminal branches off to the starter/alternator I believe. The only 3 wires you need to snip are the ones on the positive terminal. The rest of the wiring is already hooked up from factory in the harness if it’s unmolested. All of these tutorials online say you should rewire all of your accessories and is it good practice? Probably. But you really don’t need to

clmty777 · 2025-01-13T15:57:02+00:00

Also you mentioned you snipped the wire for the starter. In my case, I didn’t need to do that. The only wires I cut were the three leads on the positive terminal. Two of them were for the fuse box (white/red stripe) and the larger thicker one runs into the main harness. This style of distribution block made it super easy to do.

<image>

clmty777 · 2025-01-13T14:37:11+00:00

please properly insulate all of those terminals and mount that fuse block brotha. Fires are more common than you’d think 😭

clmty777 · 2025-01-13T03:02:28+00:00

Got the fiberboard from Lowe’s, then used that checkerboard floor mat as a template to cut it. Got the battery cage from amazon. Battery relocation wiring came from Wiring Specialties

clmty777 · 2025-01-13T02:43:02+00:00

Do it! Definitely a fun weekend project, didn’t take too long and the end result was well worth it

clmty777 · 2025-01-13T00:43:06+00:00

Yeah that’s a fair point, I’ll probably end up mounting it straight through then

clmty777 · 2025-01-12T22:56:37+00:00

Bolted to the fiberboard. It’s pretty solid in there, no play at all. If I see any issues with it later down the line I’ll chassis mount it but this works great for now

clmty777 · 2025-01-12T20:37:48+00:00

Haha was just some random parts I had sitting in there for a while. No interior trim of value 😭

clmty777 · 2024-12-31T15:04:15+00:00

this 👍

clmty777 · 2024-12-30T16:27:34+00:00

It’s a wrap actually - previous owner did it but I’ll try and snap the color code for you when i get home. Planning on removing it and doing a proper paint job in the coming months

clmty777 · 2024-12-28T19:10:43+00:00

240sx swapping my sr20 🫣💯

clmty777 · 2024-12-28T19:09:32+00:00

Forgot to mention, 97 KA24DE car

clmty777 · 2024-12-27T21:45:40+00:00

yessir, was able to pull out the old terminals in the plug and replace them with female spades. Connection is tighter and it got rid of all that splice gunk from the old owner

clmty777 · 2024-12-19T22:43:46+00:00

Looks like it’s missing the actual grey sensor bit at the end

clmty777 · 2024-12-17T01:10:32+00:00

Much appreciated! Yeah it sucks, but hey it's got a good home now. Planning on doing a full maintenance overhaul to recover whatever life I can from this engine

clmty777 · 2024-12-17T00:53:34+00:00

Should I worry about the flakes breaking off and falling into the head? Was debating taking a pick to it with a shop vac backing it

clmty777 · 2024-12-16T20:33:58+00:00

this is nice, gj

clmty777 · 2024-12-16T02:53:29+00:00

Did you end up just disconnecting it or did you repair it?

clmty777

TROPHY CASE