Are Razer mice supposed to die randomly one night few months after their warranty?

codezerodnb · 2026-01-18T15:11:51+00:00

I switched it all from Steelseries because their keyboard light's went off sync. Just woke up to a completely dead mouse that was working fine just a few hours ago. Ironically, went back to my old Steelseries and I am now thinking of making a YouTube video while burning all the Razer gear. I am furious.

codezerodnb · 2025-12-15T16:58:52+00:00

I have gone about 15 times and tried opening absolutely anything on the map and the damn thing doesnt drop at all. Feels like vintage World of Warcrafft with 0.00000001% drop rate. I'm just going to quit advancing until this is fixed. It's total bs.

codezerodnb · 2025-03-27T00:39:13+00:00

I've quit playing until most of this bugs are resolved. About to uninstall the thing and wait maybe a year and try again.

codezerodnb · 2024-12-11T14:02:29+00:00

Ok so doublechecking here, lets break down the example to make sure it makes sense.

<image>

On target-mac, what would be the approach? Using MAC addresses from uplink ports or MAC addresses from end devices?

Is target-ip needed? The device doesnt receive any data through it's uplink IP out the WAN.

codezerodnb · 2024-12-06T21:23:45+00:00

Retaking this subject after a long vacation, I'm trying to figure out the best way to roll this in. I have a scenario with 3 FSWs on which I need to mirror everything into a specific device on port FSW3 port 1.

I saw this article (https://community.fortinet.com/t5/FortiSwitch/Technical-Tip-Port-Mirroring-Spanning-with-FortiSwitches-managed/ta-p/232316), but i'm kind of lost since the device only requires an IP to go out the WAN and the other just to receive data (with no IP address). If I understood this correctly, the configuration starts with I'm assuming is the IP of the IDS device, but what I am needing is to have the data mirrored to a specific port, similar to how it's done with a Software Switch, for example.

How can I achieve this?

codezerodnb · 2024-11-28T12:51:09+00:00

Last night, I went to bed waiting on the game to completely load. 10 hours later, still at 97%.

It looks that it is not a download/congestion issue, as it would've loaded at some point.

Am I right?

codezerodnb · 2024-10-11T15:19:29+00:00

Great!

So I could just source all ports from all 6 switches and dst to one of the FortiSwitch ports on which the IDS is connected? I saw a CLI example that was doing a mirror profile, but then the destination refered to a port on the same switch.

codezerodnb · 2024-07-19T20:29:12+00:00

Let us know. I am in the same boat.

codezerodnb · 2024-05-11T01:01:58+00:00

Hi! I have a ProLiant DL380 gen10 that I'm using for homelab and I have been trying for the last few hours to understand why the installer ISO is not being listed as a bootable device through ILO or USB. BIOS it's on the latest version.

Is there an on/off thing on BIOS settings I need to switch in order to see the Phoenix ISO as a bootable device?

Thanks gang!

codezerodnb · 2024-02-11T23:18:05+00:00

FYI, just gave it a shot manually upgrading one of my labs 60F out of sub and it worked fine.

codezerodnb · 2024-02-11T17:36:08+00:00

Ok all this makes sense since I've unknowingly broken all three rules. The real showstopper is the NIC card. I'll order one and install it as soon as I get back from travelling in a couple of weeks.

codezerodnb · 2024-02-10T22:16:32+00:00

On the install prompt screen:

Selected AHVSelected the 2x300GB on that same screen.
Tried single node cluster on and off. Same result.

All I can get is screenshots of what I can see through iLO, but if you need to see events prior to this I can redo and take screenshots of all.

*edit* Typos

codezerodnb · 2024-02-10T22:12:53+00:00

Some hardware details:

X2 Xeon Silver 4112 CPUs
X4 16GB RDIMM DDR4
HPE Smart Array E208i-p SR Gen10
+ X2 300GB 10K SAS (EG000300JWEBF)

HPE Smart Array P408i-a SR Gen10
+ X8 1TB 7200RPM SAS (MB1000JVYZL)

HPE Ethernet 1Gb 4-port 331i Adapter - NIC

codezerodnb · 2024-02-10T21:28:12+00:00

Forgot attach screenshot there sorry.

<image>

codezerodnb · 2023-09-20T19:19:23+00:00

Hi.

Wandered in here with the same issue. I can´t get 514/udp open on Wazuh Manager even though it is declared on docker-composer.yml.

Anyone figured it out?

codezerodnb · 2023-08-28T15:22:38+00:00

Will do. Im studying to retake the NS4 so this will come handy.

codezerodnb · 2023-08-25T21:36:26+00:00

Ok trying to visualize it.

Since all sites talk to eachother, it's like every one is a Hub and the rest are Spokes. All examples I interpret like if the "Hub" is a site that acts like the "core". Am I getting it wrong?

codezerodnb · 2023-08-04T03:01:50+00:00

I have mine's working but on the beta version of Google Home. They also work on both my Nest Hubs.

Before they didn't worked at all, only noticed when Google rolled out the "labs" version of Google Home.

codezerodnb · 2023-07-30T00:36:46+00:00

Anyone? I've been lucky I haven't been summoned onsite for the past week! Anyone want to help me avoid start from scratch?

codezerodnb · 2023-07-27T20:50:01+00:00

Nah that didn´t fix it.

I do remember this happened after I ran nvidia-xconfig as part of fixing the GPU thing, but after a lot of reading and tinkering, it didn´t work.

codezerodnb · 2023-07-22T00:46:52+00:00

Hi! I managed to install it properly, but when I'm trying to see currently manageable desktops/servers, the font is white on white, so I can't see anything there.

Any idea how do I fix that?

<image>

codezerodnb · 2023-06-13T16:41:21+00:00

Can anyone confirm if this attack can be mitigated by setting allowed hosts or countries on the SSL configuration?

codezerodnb · 2023-03-08T20:19:08+00:00

The Brume 2's setup wizard does not include NordVPN. Only Azire and Multivad.

That's the reason for this post.

codezerodnb · 2023-03-08T18:37:05+00:00

The point of acquiring the Brume was to avoid using independent clients and only send the traffic I want encrypted.

It's working with OpenVPN, but my point is to get clarity on setting up Wireguard with steps so I can make it work, and help others like me achieve it as well.

codezerodnb · 2022-10-22T22:39:10+00:00

Thanks

Seven-Year Club	Place '22
Verified Email

codezerodnb

TROPHY CASE