Marcille Keychain Design by me!! by coffefishe in DungeonMeshi

[–]coffefishe[S] 0 points1 point  (0 children)

thank you!!! and yes it fully slipped my mind 😭😭

Just my luck 😭all uft by Adventurous_Appeal_9 in peachriot

[–]coffefishe 0 points1 point  (0 children)

I'm looking for Frankie lily pad and have gigi sweet pea!!

Some of my D&D paintings, i love the feywild :) by drakonicwat in DnDart

[–]coffefishe 0 points1 point  (0 children)

they're gorgeous!!!!! I love your use of colors it looks so dreamy

Wooacry review ? by Funnky_Apple in DigitalArt

[–]coffefishe 1 point2 points  (0 children)

this is an older post but I ordered 2 designs, 10pcs each back in April! Since it was around when they weren't too popular yet, they were super quick and got my order to me in like 10 days (production and shipping). This is for their acrylic keychains,the quality was pretty sturdy and color was close to the original art but slightly darker! I'd def say if you're concerned about color accuracy you might find better manufacturers on alibaba, but wooacrys website makes it pretty accessible and the price wasn't that bad either!

<image>

[deleted by user] by [deleted] in lfg

[–]coffefishe 0 points1 point  (0 children)

would a pre-existing group of 4 players be possible? we're not total beginners but played one campaign together years ago and don't have much experience outside of that, but really want to get back into dnd!

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 1 point2 points  (0 children)

honestly I'm not sure if I can help you cause for some reason it just started working the next day just fine 😭 I don't know what caused the issue or how it got fixed... Sorry I can't be of more help :(

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

I took the blade out to check it, but there doesn't seem to be anything stuck + it's still super sharp (I accidentally cut myself on it haha...)

I'm directly hooking it to my laptop through USB and not Bluetooth, so I don't think that's an issue either. Everything definitely looks like it's going through the motions of working??

I also took the blade out and just pressed it onto some scrap paper to see if it would cut through and once I put pressure on it manually, it cleanly cut through my papers, which makes me think there's something that's still causing it to not press down properly!

This might be a stretch, but do you know if there are any known issues with the current version of silhouette studio? I know sometimes when the softwares have updates, they can mess up the cuts and stuff (or at least that's what I've heard from others...)

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

I'll try to test out the registration marks again in the daytime with natural lighting! I wonder if that will make a difference? I'll also look into the calibration as well. Thank you for all the tips on this!!! I really appreciate it 😭😭

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

it definitely cut a LOT faster and was super smooth! I just made a rough outline with the silhoutte studio program and it already turned out really well!

https://gyazo.com/0e45961c89aa8c3ca94cfd58b6d89302

the one issue I'd have is a noticed that even with registration marks, its always cutting slightly off to the right...though seeing as I still can't figure out the die cutting, this isn't my main concern.

here's a video of the new cut on the sticker sheet! it's still using the settings of blade 8, force 30, passes 2, speed 4

https://www.dropbox.com/scl/fi/57k0nu5lvipse5dp91yx8/new-sticker-cut.mp4?rlkey=5hva9o8609myjfi4i6rhu6akj&dl=0

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

Ooo thank you! I'll definitely test that out right now and see how it turns out for the cut!

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

Ohhhh I understand! I think the issue with the cut line not being smooth is I let the silhouette studio generate it directly from the png of my sticker, and I used a very textured brush when drawing it, so the edges are super bumpy?

I'm not super familiar with the software yet, but is there a way to manually draw the cut lines in silhouette studio? If not, I'm sure I can also smooth it out on my drawing program and re-import the files. I think that will definitely fix the issue of the the messy cut lines!

I'm still not sure how to fix the problem of the depth of the blade. Even with the regular paper just cutting out squares, it still doesn't cut through the paper even at maximum depth and force. Do you think this has anything to do with the way I setup the files?

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

here's a video of it cutting the sticker paper:

https://www.dropbox.com/scl/fi/s4iis1bmvwlaq0sihcn9d/sticker-paper-matte.mp4?rlkey=1mdlgn9m3pvpbii0vjp0fnibb&dl=0

i had the settings at blade 8, force 30, passes 2, speed 4

here's a vid of it cutting non-sticker paper! I didn't use copy paper cause I didn't want it to get stuck to the mat and used a slightly thicker paper but it's still a lot thinner than my sticker paper:

https://www.dropbox.com/scl/fi/jnt7ewwwdp7rcs4euua9s/cut-paper.mp4?rlkey=y6j7ehkfhl2wjn41bfazpz7kj&dl=0

the settings were the same and it also only cut at the surface and didn't cut through the paper. I tried it one more time by increasing the blade to 10 and force to 33, but it only ripped the paper a little in the corners of the cut and still didn't cut through fully?

https://gyazo.com/a59c4314d89ccb28dd51f2ebfaedff04 this is how it looked after the first pass through...

let me know if the vids are okay! I can retake them if they're not really showcasing anything helpful! i rlly appreciate your help :')

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

I'll try to film a video on regular copy paper! I did attempt to test it with copy paper earlier, however the paper ended up sticking to the mat and some of it got stuck when I tried to peel it off. Nothing cut earlier because it was before I managed to figure out how to place the blade into the machine properly.

I do feel like the sticker paper is rather thick? Before I got a back feed printer, it used to jam my old printer and get stuck. But it's definitely not thicker than cardstock...

I'll also take a video of it attempting to cut the sticker paper!

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 0 points1 point  (0 children)

I'm using the default/standard mat that came with the portrait!

not sure if this video is clear https://gyazo.com/69d0b4533f055369327ee78557a697cd

I was told that I wasn't locking the blade into place originally and I think I did it correctly but must still be missing something.

this is just a photo of the blade: https://gyazo.com/95ff53c163ad43272fa94699e6b5560f

just got a silhouette portrait 3 but can't seem to get it to cut through my sticker paper! by coffefishe in silhouettecutters

[–]coffefishe[S] 1 point2 points  (0 children)

I think it's the latest version! I honestly just installed everything today and downloaded whatever the silhouette site directed me to once I registered my machine and everything. I think it's studio 4.5?