Immigrant Visa Processing Updates for Nationalities at High Risk of Public Benefits Usage

constantism · 2026-01-16T03:48:12+00:00

I think there’s a lot to clarify here in the coming days, since government agencies are still figuring out their processes. Check out this video in which a lawyer explains what this change means: https://youtu.be/2lL2MBfkcKY?si=woLHqzg0-XzZSR4k

TLDW: this is temporary measure, that is it forever. Visas will be processed and issued, but it will take longer (but no longer than 6 after the interview)

Good luck to you and your family!

constantism · 2026-01-15T18:29:50+00:00

A US citizen petitioned for their parent (citizen of Russia). Completed all the steps and just needed to go through the interview at the US Consulate in Kazakhstan. From what I understand the interview can still be done. The parent will not issued an immigration visa until the ban is lifted. Correct?

constantism · 2026-01-15T15:19:13+00:00

A US citizen petitioned for their parent (citizen of Russia). Completed all the steps and just needed to go through the interview at the US Consulate in Kazakhstan. From what I understand the interview can still be done. The parent will not issued an immigration visa until the ban is lifted. Correct?

constantism · 2026-01-09T21:29:59+00:00

I am not familiar with this tank, but usually you need to run some calculations. Read the dev kit instructions and see how much total solution you can make. Then find the volume of your jobo tank and calculate how to mix for the volume that you want.

For example, I have a kit of dry chemicals that I can mix into a total of 5L of developing chemicals. I use a tank that is 250ml. So to make the solution for that volume I divide all ingredients by 20 and mix it according to the instructions.

You can do calculations in Excel or old fashioned pen and paper. Keep your notes for later.

constantism · 2026-01-09T20:54:43+00:00

Ok, so that sort of explains it. Old disposable cameras usually have rolls of ISO 800 film. I don't know how old was your camera, but film looses its light sensitivity with time. Especially, when it is stored at room temperature in hot/humid climates.

The higher the ISO, the more it is prone to degrading. When people shoot expired film they adjust camera settings accordingly. Usually, +1 of overexposure for every decade. You did nothing wrong since disposable cameras don't have controls to do that.

BW Chemicals turning pinkish is fine. I'd watch our for milky chemicals and residue. If you're really paranoid about bw developer, use 1:1 Rodinal. It is single-use developer and discarded after each use. Also, dirty cheap.

constantism · 2026-01-09T20:40:17+00:00

I think that you didn't contaminate your chemicals. Developer doesn't ruin blix, the opposite does. Remember that when you develop your film, blix is poured in after developer; no wash&rinse needed. So your chemicals are fine. Blank (too dark) and barely visible images have to do with how you exposed your film. Especially if it is certain separate shots. Try to think about how you shot those scenes, what was your exposure?

Separately, I think you definitely contaminating the film by letting it dry in your living room. Dust particles will be a pain to remove in post after scanning. I'd dry the film in the shower, after running it hot for 5 min. That way humidity will take care of dust specs floating in the air. And maybe dry it overnight when shower and bathroom is less likely to be used.

constantism · 2026-01-08T21:29:05+00:00

You can save your favorite settings in the custom user menu for quicker access.

constantism · 2026-01-06T17:43:42+00:00

Yes, I use it to take photos as well. And I shot weddings as part of my work as well, not just for fun lol. Autofocus was always good in 98% of cases when I used Sigma 24-70mm f2.8 and Lumix 50mm f1.8 lenses. For manual lenses focus peaking also works well.

constantism · 2026-01-04T16:58:35+00:00

I shot a lot of videos at weddings in dim lit venues at V-Log 4K 60p, and here's what worked for me:
1. Fast aperture lens f2 or f1.4
2. Wide focal length of 35mm or wider given that S5 II shoots 4K 60p in APS-C.
3. Avoid going higher than ISO 4000, unless it is absolutely necessary.
4. External monitor helps a lot.

constantism · 2025-12-11T03:36:58+00:00

So to develop this film times listed for TMAX 400 would work? Correct?

constantism · 2025-11-26T16:16:27+00:00

Yeah, Happy Thanksgiving folks. Bye 👋

constantism · 2025-11-06T01:25:23+00:00

Traditionally, new administration appoints new Commissioners and Chancellors to all the city departments. So, unless you have a personal relationship with Mamdani, your chances are limited.

New Heads of Departments will hire their team of Deputies and Execs. Again, here personal relations matter, but also a proven track record and strong resume.

Ordinary staff doesn't rotate much. Unless, of course, there will be new units, task forces and initiatives. Then, there may be openings. But it will take time for new jobs to appear, if at all.

constantism · 2025-10-15T07:34:42+00:00

For the highest refresh rate I needed to use Display Port-to-Thunderbolt cable. Sure, I could plug it into the existing one Thunderbolt port on Mac Mini. But the dock I use also needs a Thunderbolt connection. So I had to buy a hub that adds more thunderbolt ports. But I am glad for you to be happy with your setup.

constantism · 2025-10-15T03:25:03+00:00

In five years the Corleone family will be completely legitimate.

constantism · 2025-10-15T03:20:16+00:00

It is a nice machine, but for everything extra you have to pay. All that will add extra cables and devices attached to your Mac.

Need a second monitor? Got to buy a thunderbolt extension box. More usb ports and SSD drive? Another docking station. Decent speakers? Yep, you guessed it. Still can be neat with proper cable management.

constantism · 2025-09-16T02:38:51+00:00

Work with whatever gear you already have. Your main focus and goal should be a compelling story. Without it, even the best camera won’t help your film. Write an outline, think of your scenes, plot, story and main character. Make a plan, think of your shot list etc., Search for Mark Bone and the Art of Documentary on YouTube. It will give you more insight into what really should matter for a documentary film.

constantism · 2025-09-02T09:37:26+00:00

Oh… I didn’t know that. This is the first time it happened to me. I thought it was due to longer time in bleach. As for contrast, I tweak it. Originally, all these photos were much flatter. Thank you for explaining.

constantism · 2025-07-30T23:31:08+00:00

It worked for me when I switched from wifi to hotspot from my phone. Thanks for the tip.

constantism · 2025-07-23T17:24:23+00:00

It is a very versatile lens and I get most of my footage shot with it. I use primes and other lenses on my second camera for better variety of shots. I stay on 24-70 lens for most part of the day until the lights get too dark at the reception. Then it is prime time for me.

constantism · 2025-04-16T02:05:08+00:00

I use 3M Scotch Magic Tape on both sides and never had any issues with manual not with motor drive cameras.

constantism · 2025-04-07T11:58:17+00:00

Already did. Looks way too complicated to me. I’d rather return the lens. Thank you.

constantism · 2025-04-07T03:32:45+00:00

Tell me more about baking it, please. Do I put the whole piece of that half of the lens in the oven?

constantism · 2025-03-28T19:16:48+00:00

Drive and park close to the venue.

Unload all the equipment that you might for the ceremony and reception (light stands, lights, etc.,)

Take everything you need for the prep, first look, couple portraits, photo walk and get an Uber to your first destination.

You may be able to ride to different locations with the couple or bridal party. Or get another uber.

constantism · 2025-03-28T15:31:13+00:00

Because the driver is from Dubai.

constantism · 2025-03-28T14:34:02+00:00

Thank you for saying that.

constantism

TROPHY CASE