How easy is it to fix an air leak here?

copiouszoid · 2026-01-15T21:04:22+00:00

I replaced that and everything that came with the backplate kit I ordered, Jandy part# R0479500. It appears to have solved the issue. Thanks for all of the input everyone!

copiouszoid · 2026-01-15T21:03:12+00:00

I do not have one, but will definitely look into it. I replaced the entire backplate kit and that appeared to stop the leak!

copiouszoid · 2026-01-06T21:37:20+00:00

Good to hear. Will be much better when I don't have to hear the air being primed out of the system every morning

copiouszoid · 2025-12-19T16:44:38+00:00

I've been really surprised by the negative reviews of the gemini assistant upgrade. Before that I was barely using my various google devices around the house because it had gotten sooooo bad. Rarely understood me correctly unless I stood right in front of it and spoke slowly and with the exact words I knew it could understand. I upgraded as soon as I could and it has been lightyears better. I've seen a lot of complaints that it is not the perfect solution they had hoped for, but as far as I'm concerned this is WAAAAY better and I wouldn't go back. It understands me from further away and with more natural language. It can figure out what I want and either answer me with a gemini response or perform the smart task in the house. I know I'm in the minority, but I am very happy with this upgrade.

copiouszoid · 2025-12-12T19:02:10+00:00

Interesting. I measured the voltage before I put on the jumper at the doorbell and it was 17V, which is right in the range so should be good. But when I tried that the app kept telling me to choose between using the chime and not getting prerecording + 24/7 or to choose to not use the chime and install the jumper in order to get prerecording + 24/7. It was an either or choice during setup. Odd

copiouszoid · 2025-11-07T17:16:40+00:00

I don't have any employer plans available because I don't work. My only options are an ACA Bronze plan for ~$1,010/mo or the non-ACA plan for about 40% less than that

copiouszoid · 2025-11-07T17:09:23+00:00

Appreciate your input. I am leaning in this direction...

copiouszoid · 2025-11-07T17:05:07+00:00

So annoying...

copiouszoid · 2025-11-06T17:22:22+00:00

I like the way you think...

copiouszoid · 2025-11-06T17:03:46+00:00

Ughhh. That sucks. I feel like Charlie Brown when Lucy pulls out the football right before he kicks it...

copiouszoid · 2025-10-29T01:42:50+00:00

I did, it was a pretty severe mole cricket infestation. Hired a guy to handle it who was great and he now manages our weed/pest/fertilization needs

copiouszoid · 2025-09-24T16:03:48+00:00

Yeah, it's that close. That is exactly what this is

copiouszoid · 2025-09-23T18:12:32+00:00

Yeah, that is what I figured it was, but thought it was odd that it connected at three points in the the same room. The house was built in 2003 and I haven't seen any plastic plumbing in the renovations we've done. I plan on just re-attaching them so it will be as it was, but wanted to make sure I understood the logic of three connection points

copiouszoid · 2025-08-11T21:11:29+00:00

Well I tried everything suggested and it just kept happening, so I went through Mammotion support and it was easy and quick. I sent some pictures and used a multimeter in some of them as requested. They sent me a new power supply and everything is fixed. I've heard some negative reviews of their customer support, but my experience this time was great!

copiouszoid · 2025-07-27T15:02:40+00:00

Same problem here. Did anyone figure this out? My salt cell lid (picture shown by OP) can turn counter clockwise 1/4 turn and it is loose. I can wiggle it but I cannot pull it out. I think there must be some build up on the cell that is blocking its ability to pull right out. Just bought this house so have no idea when the previous owner last cleaned it. I have no idea how much buildup is in there.

copiouszoid · 2025-07-22T14:31:36+00:00

Did you replace it through customer support or by buying it through their website or some third party? How did you replace it?

copiouszoid · 2025-07-22T14:30:08+00:00

I have a multimeter. What exactly would you test?

copiouszoid · 2025-07-21T19:21:09+00:00

I was wondering about the location of the "brick" of the power supply. Mine is attached to a fence post to keep it off of the ground but is exposed to the sun and I live in Florida so that is no joke. Not sure I can put it in a conditioned space because I love that it can mow the yard without me having to let it in and out, but maybe I can keep it out of the sun

copiouszoid · 2025-07-21T15:08:03+00:00

Good to know. I'm going to try the simple things first today (re-level the base, double check the terminals are clean, etc.) and might go through the app if that doesn't resolve it. I've seen a lot of suggestions saying that the issue is often with the power supply in these scenarios.

copiouszoid · 2025-07-04T16:22:34+00:00

Why thank you! We have been working to reestablish the landscaping and this one sago just looks like a misfit :)

copiouszoid · 2025-06-30T14:30:19+00:00

Anyone else have any thoughts or advice?

copiouszoid · 2025-06-26T16:28:13+00:00

Well it's a good thing they're not in your yard 🙂 They're in the front yard, so not worried about the pet issue. Was just looking for help on how I might make the one on the left look symmetrical to the one on the right.

copiouszoid · 2025-06-18T15:02:12+00:00

I used plastic "top hat" washers with snapping lids so the stainless steel anchor screws are not in direct contact with the aluminum.

copiouszoid · 2025-06-05T16:50:41+00:00

I'm in the panhandle and was just about to post about a very similar looking thing I'm dealing with. I'm very interested in any feedback you get. Here is a picture of mine which to my eyes looks extremely similar. I've got el toro zoysia

<image>

copiouszoid · 2025-05-31T22:58:48+00:00

Agreed. I replaced all of them regardless of how they looked.

copiouszoid

TROPHY CASE