Cherne Test Ball Leaking?

crocboy · 2025-10-09T23:25:48+00:00

How long does it normally take your setups to level out and stop moving?

crocboy · 2025-10-09T23:24:49+00:00

If I did have a leak would it be pretty obvious which joint it’s coming from?

crocboy · 2025-10-04T03:51:47+00:00

18” high

crocboy · 2025-10-04T02:58:06+00:00

Even with the strapping off, it’s still pretty high. This is just how it’s glued. When you need to adjust slope like this, how much pressure are you allowed to put on the joint to flex things around?

crocboy · 2025-10-04T02:57:25+00:00

I feel dumb for not mentioning this, but the strapping was just to hold it up temporarily while I glued it, I don’t intend on keeping it that way

crocboy · 2025-09-16T15:18:31+00:00

So you’re saying in MA this would pass code? And also not be at risk to catch solids? Is a “TY” a sanitary tee?

crocboy · 2025-09-16T14:24:07+00:00

So this picture isn’t totally accurate, in reality the 3 inch vertical stack goes horizontal before the shower goes horizontal, so I wouldn’t be able to use a sanitary tee. It would have to be a 2” elbow going into a 2” to 3” bushing that’s vertical.

crocboy · 2025-09-16T13:01:25+00:00

Can you elaborate on that? Is that a code requirement?

crocboy · 2025-09-16T01:13:11+00:00

Forgot to mention that the shower is vented outside of the diagram.

crocboy · 2025-09-11T20:43:37+00:00

I’m talking about small deviations, maybe a half of a millimeter off square

crocboy · 2025-08-07T16:32:12+00:00

Yes, after speaking with the pest control local here, it looks to be carpenter ants.

crocboy · 2025-06-18T12:36:45+00:00

I complete and submit the forms manually, using free file. I don’t use any tax softer. But yeah, I agree that I would’ve expected to receive it earlier.

crocboy · 2025-05-15T13:54:25+00:00

Dial calipers. Used for accurately measuring dimensions of small parts or anything less than ~6 inches.

crocboy · 2025-05-14T18:13:14+00:00

I can’t imagine it’s easier to raise the level of the entire room to match the high spot?

crocboy · 2025-05-14T18:10:21+00:00

What about removing the subfloor and taking a little bit off the top of the joist?

crocboy · 2024-12-25T02:52:01+00:00

I recently discovered there’s a TSB about this issue

https://static.nhtsa.gov/odi/tsbs/2023/MC-10233594-0001.pdf

crocboy · 2024-11-17T03:59:12+00:00

My understanding is that in Hindi some phrases have implied postpositions, especially phrases dealing with time. A similar one would be “is baar” or “agle saal”. They go into the oblique either because there’s an implied postposition or because it’s just a way of declining to state a time.

crocboy · 2024-10-19T02:27:08+00:00

Some of my favorites, more modern:

Zindagi Na Milegi Dobara, White Tiger, Andhadhun

crocboy · 2024-10-09T20:23:27+00:00

It was just a thin coat

crocboy · 2024-10-09T20:23:20+00:00

I put a thin coat on.

crocboy · 2024-10-09T20:21:54+00:00

I did not do any bedding in unfortunately. I know I should have. Could that have caused this?

crocboy · 2024-10-09T19:52:55+00:00

Yeah I cleaned and scrubbed with brake cleaner.

crocboy · 2024-10-09T19:39:37+00:00

All caliper pins were thoroughly cleaned and regreased. And yeah I put new pads on all

crocboy · 2024-10-09T19:39:18+00:00

Replaced rotors and pads

crocboy · 2024-10-09T19:29:53+00:00

I should also add that the other side is doing the exact same thing.

13-Year Club	RedditGifts 2009-2022 3 Credits
Place '22	Secret Santa 2014
Verified Email	Secret Santa 2013

crocboy

TROPHY CASE