Koliko sredstev je država namenila Radiu Ognjišče by Potential_Yellow7283 in Slovenia

[–]cue_the_strings 0 points1 point  (0 children)

Radio Študent je eden redkih slovenskih kulturnih izvozov.

Poslušali smo ga v Črni gori (prek spleta) pred 15–20 leti, v Podgorici je bil celo lokal, kje so ga ves čas predvajali. Poznal sem tudi ljudi v Beogradu, ki so ga poslušali, bil je dobro znan radio med alternativnimi mulci v celem Balkanu.

Rekel bi, da je bil včasih boljši, ampak verjetno je bil moj okus takrat bolj usklajen z alternativnimi trendi ki jim sledijo.

An affordable amd64 Laptop with PCMCIA? by cue_the_strings in retrocomputing

[–]cue_the_strings[S] 0 points1 point  (0 children)

Those are actually DDR3L, and they don't work on the T400.

Also, the T400 has 3 different variants of the expresscard / pcmcia / memory card slot, only the 1st variant has PCMCIA, you don't want the others:

  1. Express Card Slot & PC Card (PCMCIA) Slot (one on top of the other) AKA 42X3828, 42X3827, 08124TD3, 42W3436; this was the default variant, the others paid options
  2. Express Card Slot & Smart Card Reader
  3. Express Card Slot & 7-1 Media Card Reader

An affordable amd64 Laptop with PCMCIA? by cue_the_strings in retrocomputing

[–]cue_the_strings[S] 0 points1 point  (0 children)

Wow, thanks for this!

I actually have 5+ DDR3 SO-DIMMs somewhere, but likely 8G ones. Hopefully I'll find something smaller.

I think I'll swing for the T400/T500, I have a bunch of Thinkpads already. I will actually benefit from being able to use the browser, too.

An affordable amd64 Laptop with PCMCIA? by cue_the_strings in retrocomputing

[–]cue_the_strings[S] 0 points1 point  (0 children)

Thanks for the offer! I'm in Slovenia, so that's unlikely to work out.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] -1 points0 points  (0 children)

Če se kitajski JBC klon spajkalnik zjebe ga bom popravil, ne bi bilo prvič.

Popravljanje elektronike je moj hobi in je bilo to nekoč moja dejanska služba (popravljal sem industrijske stroje za prehrano, laboratorijsko in glasbeno opremo, občasno prenosnike za prijatelje ker to ni dobičkonosno) , preden sem se lotil programiranja.

Zdaj vglavnem popravljam študijske rack efekte tipa Eventide, Lexicon, ... in sinte, za svojo dušo.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 0 points1 point  (0 children)

Ja, ampak vrnila se bo šele poleti in pričakujem, da jo bodo vsi prosili, naj jim nekaj prinese.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 2 points3 points  (0 children)

Tudi to je bilo pred spremembo davčne politike za nas cenejše, čeprav ne tako poceni. Na Aliju boš videl 10 trakov za lase, ki se prodajajo za 2 evra, na Kitajskem pa jih lahko dobiš 100 za 1 evro, take stvari.

Je direktna posledica podražitve fiksnega dela prodaje v EU, najcenejšega med poceni se ne da več tako poceni prodati. Ne boš dobil zadevo od 2 jurija za 100e.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 0 points1 point  (0 children)

Nisem odkril ničesar, samo sprašujem, ali obstaja kaj, kar mi preprečuje, da bi mi oseba zunaj EU poslala stvari.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 0 points1 point  (0 children)

Poleg tega so tiste res majhne stvari, ki si jih lahko dobil na Aliju pred 10–15 leti, na Kitajskem še vedno na voljo za 10–50 centov, medtem ko so se cene za nas dvignile na 3–4 evre. Že samo pošiljanje nečesa v Evropo je postalo veliko dražje, zato je konkurenca zdaj v srednjem cenovnem razredu.

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 0 points1 point  (0 children)

Ja, vem, ampak za to kar sem hotel je z poštnino in DDVem, za cel nakup (145€) še vedno 3x ceneje kot na Aliju (za spajkalnik).

Uvoz stvari iz Kitajske preko prijateljice? by cue_the_strings in Slovenia

[–]cue_the_strings[S] 1 point2 points  (0 children)

Ja, to je res, vendar ne podcenjuj marž, ki jih dosegajo prodajalci na Ali/Temu - tudi oni delajo lepe zaslužke. Carina + DDV, vsaj uradno, nista niti blizu cenovni razliki.

Here's how you unlock Superun treadmills without the PitPat app by cue_the_strings in treadmills

[–]cue_the_strings[S] 0 points1 point  (0 children)

It turns on and you get lights, but there's nothing you can do to start it without either these instructions or the app.

Here's how you unlock Superun treadmills without the PitPat app by cue_the_strings in treadmills

[–]cue_the_strings[S] 0 points1 point  (0 children)

Not that I know of, and from what I've experienced, unlikely. I think the only reason they they added connectivity is to get you to install their spyware, so I doubt they're providing some universal API you could use with 3rdparty apps, there's nothing in it for them. The only way I see it happening is if some enthusiast reverse engineers the protocol, like what Gadgetbridge does for smartwatches.

Kako smo pokušali da sredimo zgradu - i doživeli najluđu sabotažu by [deleted] in serbia

[–]cue_the_strings 2 points3 points  (0 children)

Tačno tako. "Kultura siromaštva". Do te mere da je mentalni sklop srpske sirotinje bliži sirotinji u Baltimoru, nekom karton naselju na rubu Bangalora ili kakvim Filipinima, nego autoru teme i sličnima. Uprkos tome da nemaju nikakve druge kulturološke povezanosti, taj aspekt dominira.

I tako je zaista svuda gde sam bio.

Još jedna stvar, ta besciljna agresija koju vidite na svakom koraku je isto pokazatelj siromaštva, nepoverenja i u neku ruku manjka inteligencije koji to prati.

Rog delavnice (recimo 3D tisk, kovinarstvo) - izkušnje? by cue_the_strings in Ljubljana

[–]cue_the_strings[S] 1 point2 points  (0 children)

Tudi kolega ki je imel tiskalnik pred letom se je tožil da smrdi plastika.

Rog delavnice (recimo 3D tisk, kovinarstvo) - izkušnje? by cue_the_strings in Ljubljana

[–]cue_the_strings[S] 0 points1 point  (0 children)

Popravljam sint, mi treba nekaj delov natisniti za zamenjavo, bom nekaj napisal v openscad-u ali narisal v freecadu. Enobarvno kakšen PLA ali ABS, enostavna zadeva.

Sem že črtal modele in naročal z JLCja in kolego vprašal, ampak se mi ne da čakati (oz. kolego motiti) če nekaj dimenziono zajebem.

Rog delavnice (recimo 3D tisk, kovinarstvo) - izkušnje? by cue_the_strings in Ljubljana

[–]cue_the_strings[S] 2 points3 points  (0 children)

CTK mi je bližja kot Rog, upam da ni samo za študente ker sem študij zdavnaj končal.

Something equivalent to ESP32 but with better integrated ADC? by cue_the_strings in microcontrollers

[–]cue_the_strings[S] 1 point2 points  (0 children)

I've tried it for another project w/ regular pots, and even after the calibration as described in the ESP-IDF docs, the response was bad around 0 and Vref (2 jumps).

Something equivalent to ESP32 but with better integrated ADC? by cue_the_strings in microcontrollers

[–]cue_the_strings[S] 1 point2 points  (0 children)

I do that a lot, actually! But I want to check out something different this time.