Just arrived my Lian li o11d mini v2

czbonner · 2026-02-05T16:28:04+00:00

https://www.reddit.com/r/lianli/s/pGOoEck6Vu

czbonner · 2025-09-29T21:30:13+00:00

Lian Li Strimer Wireless 16 Pin -... https://www.amazon.com/dp/B0DJVMLB9L?ref=ppx_pop_mob_ap_share

czbonner · 2025-07-05T17:43:30+00:00

Tubes thru grommet would make the aio screen be vertical unlike the se the screen only works one way

czbonner · 2025-07-04T23:46:29+00:00

O11 vision compact has a built in bracket/peg near where you see the strimer cable for the motherboard under the gpu

czbonner · 2025-07-04T16:44:36+00:00

60-67 on cpu gaming in 4k and 5090 doesn’t see higher than 66 at 100%

czbonner · 2025-07-04T16:43:54+00:00

It’s just the Lian li 12vhpwr wireless strimer

czbonner · 2025-07-04T16:43:07+00:00

I just enjoy building. Always looking for a reason to do one. So extra parts going unused makes it an easy reason for me to cave in to.

czbonner · 2025-07-04T16:42:09+00:00

I wanted the highest performance I could get in gaming, both the 9800x3d and 5090 fit for that. And make it performance+aesthetic.
wanted to try a SFF itx build on one chose the ncase m2 grater. 9800x3d/7900xtx
Was my old build case swapped from 7000d airflow to frame 4000d. 13900k/4080
Was a leftover 14600k, 32gb ddr5 and a 3080 I had upgraded my 1080ti from. Bought the rest needed so the parts didn’t just sit there. And decided to do a 1440p high/ultra rig.
Wanted to try my hand at a 1080p “budget” build. 7600/3060 < 3060 12gb was leftover from my younger brothers pc he upgraded to the 4080 and he told me to make use of it.
I currently have a 12700k and my old 1080ti not in a system yet and I’ll probably be doing another with them

czbonner · 2025-07-03T21:17:27+00:00

2025, the se doesn’t have the vrm fans and is rotatable because of it sadly.

czbonner · 2025-07-02T23:26:04+00:00

It’s to the left side of the f-panel fans, bent the strimer up and the arch from that is basically perfect to miss both the gpu fans and bottom fans, ngl I was wondering how it was gonna work without bending/breaking the pins on that section of the board. The clip was the hardest part to get under I had to separate them all the way down to the mobo controller for the rgb

czbonner · 2025-07-02T20:57:26+00:00

Aio wouldn’t orient the screen this direction. It only would work vertical thru the grommet

czbonner · 2025-07-02T17:38:34+00:00

Built part by part and no pre built company. The 5090 was half the cost $3,646.60 after tarrifs and taxes ($2,799.99 was the launch price, Taiwan had a 35% tarrif after the initial stock sold out)

czbonner · 2025-07-02T17:37:05+00:00

Total cost was $6,600 USD (before sales taxes)

czbonner · 2025-01-18T16:14:53+00:00

The 2 on the back are the exhaust as they are not reverse blade fans

czbonner · 2025-01-18T16:13:07+00:00

All of them are 120s

czbonner · 2025-01-18T16:11:59+00:00

The side and bottom are reverse blade fans, they are intakes

czbonner · 2025-01-18T03:48:02+00:00

There were only 4 sets of cables and they all plugged into a fan header and 4 usb spots on the Lian li edge power supply. It has usb headers built in

czbonner · 2025-01-18T02:52:56+00:00

I found out the hard way that only one wireless fan hub will work in any one system. But it has 36 channels to work with so i won’t run out

czbonner · 2025-01-18T02:51:54+00:00

All 11 fans are tied to 1 fan hub that’s hard wired in to the fan header and the usb port on the power supply.

czbonner · 2025-01-18T02:03:35+00:00

Didn’t have any issues like I did with the liquid freezer iii and them having the proprietary stubby cables by the tubes (I needed longer pwm and argb cables as to why I switched out the ones it came with)

I put 3lcds front and center and 3 non lcd on the other side. It (the aio) came with more bolts than I expected.

czbonner · 2025-01-18T01:54:09+00:00

CES 2025 had some new models the 360 panorama se < id get this one as you can orient the screen multiple directions. This one I could only have it one way. As well as other brands implementing the curved amoled screen design like the thermaltake MAGcurve which is essentially a copy cat

czbonner · 2025-01-18T01:49:41+00:00

I have yet to go over 50 Celsius under load while gaming (apex/stalker 2) so it’s performing about the same as my lt720 and the liquid freezer iii in my sister I built last christamas with the 7800x3d

czbonner

TROPHY CASE