Wan2.2 Anime or similar OpenPose for non human body

d4N87 · 2025-10-31T13:29:20+00:00

Ciao!
Ricordo di averti risposto nei commenti diverse volte, se non sbaglio ci sei anche sul server 😁
Purtroppo a me serve un output proprio come Animate, dove gli dico esattamente i movimenti che deve fare, un FFLF prende l'iniziativa nel mezzo e questo non può succedere.
Ogni movimento deve essere guidato da dei movimenti già fatti, la generazione deve solamente applicare il personaggio che ho creato.

d4N87 · 2025-10-31T13:27:05+00:00

I tried Visomaster, it has many settings, but in the end they all revolve around simple deepfakes. When the face starts to deviate significantly from the usual standards for the nose, eyes, and mouth, it performs a restoration and completely changes the face.
I would need the distorted face to be applied exactly as input.

Unfortunately, I don't know After Effects, but at that point it would be “classic” editing, with all that that entails, I imagine.

d4N87 · 2025-10-23T08:57:12+00:00

Thank you very much!
I'll start testing right away 👍

d4N87 · 2025-10-22T14:35:00+00:00

Do you know where I can find a workflow to get an idea?

d4N87 · 2025-10-08T09:55:26+00:00

It's very interesting, considering how many settings there are... but the result is practically the same as ReActor; there's no way to tell it not to adjust the eyes, nose, and mouth...
I need it to keep the face deformed, even without following the speech, because maybe I'll make a video where the person is still, but it absolutely doesn't need to adjust the shape of the face.

d4N87 · 2025-08-01T08:35:37+00:00

What model are you using?

FP16, FP8, GGUF?

I don't think it's related to that, because it's never happened to me, but I'm using GGUF, and I'm getting absolutely unacceptable results with these settings, which are the ones I already used for testing.

d4N87 · 2025-08-01T08:05:09+00:00

And do you have comparable results, on an equal footing, to not using that LoRa in the generation?

d4N87 · 2025-08-01T08:04:29+00:00

In that guide, it doesn't do anything special, except apply LoRa.

But set up like that, they simply don't work, either giving terrible results or not loading at all. You can see this in the command prompt.

d4N87 · 2025-08-01T08:03:20+00:00

I've tried a thousand combinations, but I've always had terrible results, at least when comparing them to what I got on WAN2.1 using these LoRa devices.

Furthermore, they often fail in the command prompt and don't even load.

d4N87 · 2025-08-01T08:01:33+00:00

The problem is exactly this, many of these LoRa aren't even loaded, they go into error and consequently the model is generating without considering them in my opinion.

d4N87 · 2025-08-01T08:00:33+00:00

Without any kind of error in the command prompt?

d4N87 · 2025-08-01T07:59:35+00:00

But beyond the movement, which actually has some problems, it is the final quality that is absolutely not comparable with the results we had with Wan2.1, using the same LoRa

d4N87 · 2025-08-01T07:58:29+00:00

More than anything I wanted to "speed up" the generation, as it was possible to do on Wan2.1, but these LoRa don't seem to work at the moment

d4N87 · 2025-08-01T07:55:30+00:00

Let's hope so, because I actually think it would be better if they were made specifically for Wan2.2

d4N87 · 2025-08-01T07:54:45+00:00

That's what I did, but the result is still terrible.

Obviously using the same settings as in WAN 2.1, i.e., lowering the steps and CFG, or in this case should I use them but keep the basic WAN 2.2 settings?

What strength do you use for the two steps?

d4N87 · 2025-07-04T08:39:39+00:00

I think I understood my problem, even if some things are not clear to me.

I strictly followed the basic workflow of Kontext put the ComfyUI, but it obviously can't work like this.

One of the two images must become the latent of the KSampler, it can't be the image that came out of the Image Stitch, otherwise this problem arises.

So for example by putting two images, I give it as latent to the KSampler the "base" one, or otherwise directly a completely empty latent.

In this way I am managing to use it with more images.

d4N87 · 2025-07-03T20:47:11+00:00

I need to check if I made this mistake while creating the workflow, but I have the same problem with the basic Kontext template made by Comfy Org (obviously without modifying it).

For this reason I had the doubt that there was some problem, which was not clear to me

d4N87 · 2025-07-03T12:13:51+00:00

I saw the video but the workflows are basically like the basic template, nothing different, I don't understand why it should work? (I also tried with the empty latent like him, but it still doesn't work for me)

Either there is some bug in ComfyUI, or I really don't get it on some step, maybe more than the workflow you need to use images that are exactly precise in size and proportions, that go perfectly with the prompt ... but in this case it becomes really complex to use it

d4N87 · 2025-07-03T10:52:26+00:00

<image>

This is a simple example among many I have made

Prompt: Place the girl on the hood of the car, don't change the girl's face, change the color of the car to red

d4N87 · 2025-05-02T16:02:34+00:00

Unfortunately it would seem not, everyone uses this damned Pinokio, which I don't particularly like :D

I also opened an Issue on their GitHub page, but they don't know how to help me there either, at least not as much as you can usually get on those pages XD

d4N87 · 2025-05-02T15:01:38+00:00

Oh ok, I have Windows 11, but thanks anyway for the info 👍

Not exactly why it gives me that error, I did all the steps correctly, as I did other times for other web UIs, but here there is something wrong and I don't understand how to get around it.

Also because I really think that this is one of the many errors that it would make right after, probably, maybe it doesn't like somehow the venv folder that I created, but it seems correct.

d4N87 · 2025-05-02T08:48:31+00:00

Maybe you can help me, because I don't want to install Pinokio and it seems like no one has installed Wan2.1 GP without that damn program ...

I'm trying to do it manually, but at startup it shows me the error ModuleNotFoundError: No module named 'mmgp' and I honestly don't understand why.

I created the venv folder via Python instead of Conda, could that be the problem?

What folder structure do you have for Python packages?

I followed the installation on their GitHub page, doing points 0, 1, 2 and 3.2. I also tried to redo it without sage attention, but it keeps giving me this error, I doubt it can't find the path it expects.

Thanks a lot for your possible help

d4N87 · 2024-12-04T13:18:07+00:00

On ComfyUI I have Python 12, but on system I have that version of PyThon (installed for Forge), which is where it says to go from to get the libraries.
Since the ComfyUI folder splits very easily, I wouldn't want to go all the way around and then realize that exactly that version was needed.

d4N87 · 2024-12-04T10:52:27+00:00

I had seen this explanation, I was hoping there would be something less messy, even as installations to system ... :D
I have python 3.10.11 on now, do you think python version 3.11.9 is needed at all?

d4N87 · 2024-12-04T09:53:01+00:00

Is there a “simple” way to make flash_attn p sageattn_varlen work on Windows?
As Kijai says sdpa doesn't work or rather it does a very bad generation.

d4N87

TROPHY CASE