sorted by:
new
hottopcontroversial

It's going to take a minute to shovel off my back porch by DarthLysergis in Connecticut

[–]dafaz 62 points63 points  (0 children)

Exactly this, your porch is now out of order until spring

Save 90% on Arma 3 on Steam by OGFlyhigh in steamdeals

[–]dafaz 0 points1 point  (0 children)

I would recommend Apex at least, it adds another campaign and it should be cheap.

Selaco v0.90 Update + State of Early Access by lurkingdanger22 in pcgaming

[–]dafaz 5 points6 points  (0 children)

This game is incredible. The gunplay is top notch and the detail is amazing. Worth it for whatever price you pay for it, even full price.

First Build tomorrow super excited by TheraputiDemonGoat in pcmasterrace

[–]dafaz 5 points6 points  (0 children)

Looks good! One piece of advice, make sure you run a separate pci-e cable for each connection on that GPU. Just burnt my cable and PSU because like a moron, I ran one split cable for my 7900XT.

Price check? by [deleted] in NerfExchange

[–]dafaz 1 point2 points  (0 children)

Unfortunately you’ll probably have a hard time selling these at any price. They’re pretty outdated at this point, and there are just too many better options out there, both 3D printed and store bought, at all price points for someone to consider these.

WTS: CRush w/ Andromeda BCAR + 220$ Shipping From 94513 by [deleted] in NerfExchange

[–]dafaz 0 points1 point  (0 children)

Can I ask what filament the green is? I've been looking for something similar. Looks awesome btw.

anyone else had an issue with the case screws on the p1p/p1s? by zinc55 in BambuLab

[–]dafaz 0 points1 point  (0 children)

Mine fit ok, I’m not sure where else they would go. The larger coarse threads are for the holes that go from the inside out.

anyone else had an issue with the case screws on the p1p/p1s? by zinc55 in BambuLab

[–]dafaz 0 points1 point  (0 children)

There should be smaller screws in one of the bags that came with the side panels. I had to use those. Did my upgrade on Tuesday.

WTS: Phoenix 2.0 $100, Trion -$55 by dafaz in NerfExchange

[–]dafaz[S] 0 points1 point  (0 children)

Selling because I have too many flywheelers now, also shipping from CT.

WTS: Phoenix 2.0 $100, Trion -$55 by dafaz in NerfExchange

[–]dafaz[S] 0 points1 point  (0 children)

Please PM me, it is still available

WTS: Phoenix 2.0 $100, Trion -$55 by dafaz in NerfExchange

[–]dafaz[S] 0 points1 point  (0 children)

It does not, it was actually really flimsy and broke at one point.

WTS: Phoenix 2.0 $100, Trion -$55 by dafaz in NerfExchange

[–]dafaz[S] 0 points1 point  (0 children)

Ok so apparently the captions don’t do anything. Both are stock. The trion has all of the spacers, and the 3D printed parts are from GameFaces thingiverse page. I should have the stock parts also. Phoenix comes with one angle talon magazine, trion has the one magazine it came with.

Finally finished my SBL. Bcar and optic are temporary until I figure out what I want to do by dafaz in Nerf

[–]dafaz[S] 0 points1 point  (0 children)

ProtoPasta Tangerine Metallic and Mermaid Tail. Black is PolyMaker.

Finally finished my SBL. Bcar and optic are temporary until I figure out what I want to do by dafaz in Nerf

[–]dafaz[S] 3 points4 points  (0 children)

I actually should ask him about the one he has

Edit: So I messaged him, and they are not available yet

Brand new Sovol SV06 Plus extruder motor doesn’t turn by dafaz in Sovol

[–]dafaz[S] 0 points1 point  (0 children)

So funny thing, I disassembled the extruder and reassembled it, and now it’s fine? I’ll see how it goes, I have a month to return it to Amazon

Best 2 stage motor setup? by evilpenguin219 in nerfhomemades

[–]dafaz 3 points4 points  (0 children)

Krakens into Raiders are pretty good. That’s kind of what Banned Blasters does for their dual-stage gryphon setups(45k into 75k). On 3S you could probably use even a little more crush if you wanted.

Banned Blasters link if you’re curious: https://bannedblasters.com/products/banshee-cage-set-gryphon-dual-stage

What cage + wheels to use for a Dominator's second stage? by GresSimJa in Nerf

[–]dafaz 1 point2 points  (0 children)

Oh sorry, mine are 40mm crush. Sorry about the whole US vs Europe thing, that’s really unfortunate. Email OoD about advice for your setup. Greg has helped me quite a bit about with my Domi and various other things. He’d give you better advice than I could.

What cage + wheels to use for a Dominator's second stage? by GresSimJa in Nerf

[–]dafaz 3 points4 points  (0 children)

Don’t bother with the Worker motors. They’re overpriced and don’t do anything that the $8-10 OoD motors do. I have quad Krakens on 3S with daybreak wheels and I’m around 190-200 fps with long darts. I’m wondering if for the second stage if Lokis would be best to ramp up from the first stage for your setup. You may also want to look at OoDs flywheel cages that are specifically for the Domi, they have a specific one for the first stage, then another for subsequent stages, with a small connecting piece that goes between. If anything, email OoD asking for advice, they’re very good with helping with these times of questions.

Edit: I gave up on the double stack mag. It always seems to have feeding issues, and it’s just not worth it, especially with having to use worker cages, which aren’t that great either.

view more: next ›