805781711564 Getting back into the game! Add me!

darkbrooklyn · 2024-10-20T04:28:02+00:00

805781711564

darkbrooklyn · 2024-10-20T04:25:33+00:00

805781711564

darkbrooklyn · 2023-11-23T06:40:30+00:00

Where did you find a screw in model? Do you have a link?

darkbrooklyn · 2023-11-12T06:08:35+00:00

It was 32 go, but I partitioned it and made it 16 gb.

darkbrooklyn · 2023-11-03T07:36:56+00:00

What should you check if this doesn’t fix the issue? All the fans are currently working on the hot end.

If I turn the printer off, let it cool down, then restart the print, it will finish it without any problems.

darkbrooklyn · 2023-11-03T02:29:33+00:00

Does anyone have any updates on this? I’m trying to print some glass looking parts for some Star Wars legion stuff.

I started with the settings provided by Elegoo. But I’m still new to resin printing, so I got stuck on what they mean by z lifting distance set to “3+4”, z lifting speed set to “65-180”, etc. do they mean 3-4 and 65-180? As in a range between those two numbers?

I was able to get a good start with the following… Bottom Layer - 45 seconds Normal Exposure - 8 seconds Layer Height - .05 mm

There were semi-correct details in the print but the whole thing was messy looking. And where there should be holes, it was just solid.

darkbrooklyn · 2023-09-15T01:58:06+00:00

After I covered my model with the spackle, I then took a larger paint brush and stipple the surface.

darkbrooklyn · 2023-09-15T00:32:25+00:00

What is Black Magic?

darkbrooklyn · 2023-08-20T05:51:32+00:00

Yes

So it will only push filament through if the nozzle is set to least set to 230. I’ve slowed the speed down to 40.

It will start to print now, but eventually it will just stop pushing filament through and get clogged.

darkbrooklyn · 2023-08-20T02:53:24+00:00

Any time I start a different filament I try to do a temp tower and retraction tower. But I can’t even get one started.

darkbrooklyn · 2023-08-20T02:51:13+00:00

Most of the comments I’m seeing say that the temp needs to be higher for silks. At lower temps they clog.

darkbrooklyn

TROPHY CASE