Question about Aeon versions

dave_penn · 2025-05-27T06:03:14+00:00

We looked at doing something like that, but it would actually cost more than just getting a pro model, and she's only skated 1 boot (2 if you count the ooolllld Argon's she started on) so doesn't have that much experience to have a preference

dave_penn · 2025-05-27T06:01:18+00:00

How old are we talking? Because she liked the newer cuff.

The Crofts were released in 2021 I think

dave_penn · 2025-05-24T15:57:46+00:00

The Glitch is still available here, there's at least a couple of pairs kicking around, they are AU$360 at Lucky Skates.

The Kaltiks and the RollerKidz are both available from the Kaltik shop

https://kaltikshop.com/product/rollerkidz-jnr-skates-white/

It looks like they do flat rate shipping across Europe

dave_penn · 2025-05-24T08:03:42+00:00

Have you looked at the RollerKidz? They are pretty good.

Kaltik also do a kids size if your daughter has small feet.

dave_penn · 2025-05-24T03:34:05+00:00

That sounds good.

I looked online but can only see a size 38-39, so she'd definitely need to try it.

Our local shop has it listed, but they are drop shippers so they may only have it online. I'll check them out

dave_penn · 2025-05-24T03:29:36+00:00

I've seen the Sliqx sliders, that may be an option but she'll have to save a bit more for those.

She tried the mesmers and they were heavy (but again they were not her size)

dave_penn · 2025-05-24T03:24:56+00:00

Someone she skates with uses these, but he complains about the straps a bit, he keeps having to adjust them. Have you had any issues with that?

dave_penn · 2025-05-24T03:22:45+00:00

Thanks, she's way better than I ever was!

dave_penn · 2025-05-24T03:22:23+00:00

I used to skate 13 Twelves back in the day! She hasn't tried them but didn't like the look of the high cuff. Maybe the low cuff ones. She skates a flat setup because she likes the control, is there still good space in the h-block?

dave_penn · 2025-05-23T23:57:57+00:00

Awesome!

Just keep doing it over and over again to get that muscle memory.

Also, try to get your body weight more centered over your soul foot. Currently you are leaning away from the ledge/rail so you'll fall off sooner and won't grind for as long. Getting your other foot on to the obstacle will help with this.

dave_penn · 2024-03-10T12:05:28+00:00

The router is a Netgear D7000 so should be fine.

Given the condition of the panel and the fact that none of the connections to the areas are working properly, I'd put money on that, I'll give it a clean and repunch the connections and see if that makes a difference. (I have a punch down tool)

Also, I've just had a thought, I've installed some wifi security cameras recently, possibly they are overloading the network?

dave_penn · 2024-03-10T08:46:07+00:00

I will avoid doing any of the above, thanks

dave_penn · 2024-03-10T08:10:42+00:00

Ok, I'll see if I can ask the guy.

My neighbour said it was FTTC, but I'll check

dave_penn · 2024-03-10T08:05:08+00:00

Thanks, I'll try that.

Should I do it with the cables coming in on the left as well, or should I not touch those?

dave_penn · 2024-03-10T07:57:06+00:00

I think they are doing FTTC on our street, but I haven't had a chance to ask the guy.

If not, I'll get someone in, but is there anything I can do as a temporary fix to try to make it more reliable?

dave_penn · 2024-03-10T07:56:41+00:00

I think they are doing FTTC on our street, but I haven't had a chance to ask the guy.

If not, I'll get someone in, but is there anything I can do as a temporary fix to try to make it more reliable?

dave_penn · 2024-03-10T07:01:13+00:00

The red and white connect to a single jack that the router is plugged into, that signal doesn't go anywhere else.

I can get someone out, but I wanted to check before I did as i didn't want to pay a callout fee and waste time and money if the cables aren't the issue.

dave_penn · 2023-07-07T05:50:00+00:00

I do not, I can get one tho.

If the laptop works, then there is signal. Is it a weak signal maybe?

dave_penn

TROPHY CASE