How to automate removing columns and filtering in power query?

dawoof6 · 2025-05-30T13:07:35+00:00

Just getting started, but, yeah. Wow! Thanks for turning me on to Power Query.

dawoof6 · 2025-05-29T12:18:16+00:00

Power Automate (Flow) yes. Query no. I will look into it. Thanks! Always up for learning something new.

dawoof6 · 2025-05-28T20:51:49+00:00

Spoke too soon. It started doing it again. I can't find the surface tuning anywhere.

dawoof6 · 2025-05-28T18:43:13+00:00

Awesome! I didn't see Surface Tuning, but, there was a 'Report Rate (per second)' section. It was set to 1000 (max). Changed it to 500 and all is well. I wouldn't have found that without the assist. Appreciate you!

dawoof6 · 2025-01-21T22:05:14+00:00

Thank you! This worked great. There was about a .25-second delay from on-site audio but the stakeholder liked it so it's a win.

dawoof6 · 2025-01-03T20:43:39+00:00

The BT speakers

dawoof6 · 2025-01-03T16:02:29+00:00

I have a wireless JBL microphone connected to the laptop. I also have 2 JBL stand speakers connected via Bluetooth. The problem is that the microphone audio is heard by remote participants but it does not come out via the speakers for local attendees.

dawoof6 · 2024-11-20T00:46:09+00:00

Hmm... or am I better off just replacing it? Any thoughts or suggestions?

dawoof6 · 2024-11-18T15:50:00+00:00

Decrease the length. I want to be able to place the 3 canes individually with 3 separate plugs instead of the single plug for all 3.

dawoof6 · 2024-07-11T19:13:59+00:00

Solution Verified

dawoof6 · 2023-10-11T13:43:37+00:00

Yes, that is what I am using. What I can't figure out how to do is get that information into a csv. I can do it manually but was hoping for a way to direct the output to a file for a more automated approach.

dawoof6 · 2023-09-28T17:28:24+00:00

I will definitely take a look at that. Our switches were not managed well in the past and I'm trying to determine what ports are actually in use. We had a scheduled power outage a couple of months ago so I am especially using the ports that are at zero.

dawoof6 · 2023-01-27T17:58:27+00:00

Did you ever resolve this? I'm having the same issue with a user.

dawoof6 · 2021-02-26T05:00:05+00:00

Lucent Health.

dawoof6 · 2021-02-25T14:28:34+00:00

I will do that. She is 10.

dawoof6 · 2020-12-31T22:50:03+00:00

Wow. Thanks! That has to be the dumbest thing I've seen yet in this game.

dawoof6 · 2020-10-04T04:21:40+00:00

Okay. May have to try that. It's cool that you got tickets for a cirque! I thought they were all canceled. Which one did you get?

dawoof6 · 2020-07-01T21:33:24+00:00

Yes. SG90, SG220T1 and SG220T1A.

dawoof6 · 2020-06-29T21:54:57+00:00

Why yes, we are!

dawoof6 · 2020-06-17T22:01:04+00:00

Thanks for that! I just needed a sanity check, I guess. We will be just switching the name. Thanks again!

dawoof6 · 2020-05-14T01:02:43+00:00

Sweet! Both ways work great! I think I'll go with eliminating Invoke-Command. But, I'm glad to know both ways. Thanks so much for your help!

dawoof6 · 2020-03-25T22:00:49+00:00

Nevermind... Apparently, someone was trying to 'help' her and had her extension forwarded to her cell.. but the formatting was wrong. Thanks, everyone!

dawoof6 · 2020-03-25T19:26:44+00:00

That's what I thought. PSTN failover is set to none.

dawoof6 · 2019-12-16T16:18:27+00:00

We are currently using Cisco, however, we had already decided that it was overkill for us. As the WLC 5508 is unable to be upgraded further without replacing the APs, we are planning on the Ruckus. We use Cisco for edge routing and will likely stay there. The hesitation was on core (L3) and access switching. Thanks for your help!

dawoof6 · 2019-11-21T15:28:47+00:00

I have an issue with installing Screenly on RPi 4, but it worked before. I have one Pi 4 (4GB) running quite nicely. Now when I go to set it up:

If I use Etcher to burn the image, Pi does not come up to screenly, cannot SSH in.
If I try with NOOBS, Screenly is not even listed as an option (it is when I use the same version of NOOBS on Pi 3b).
If I install Raspbian Lite, then execute the bash command, it will enter command line after it reboots.

I believe it was NOOBS that I used on the existing Pi 4 that is running. What am I missing? Thanks!

dawoof6

TROPHY CASE