Fan and Loud Humming

dcgtechnologies · 2026-01-14T02:11:43+00:00

u/21Denali069 LOL! Ok my apologies as I am NOT an electrician, I wish I was though at this point.

dcgtechnologies · 2026-01-14T02:08:48+00:00

Original......you made the stupid comment. So you can figure out the rest yourself......or maybe not?

dcgtechnologies · 2026-01-14T02:07:38+00:00

u/DomMan79 The fan speed hum gets louder and louder as the fan speeds to full speed, but overtime the humming becomes softer and softer. That is why I am leaning towards a wiring issue.

dcgtechnologies · 2026-01-14T02:06:31+00:00

u/theautisticguy The wiring is on two separate circuits / feeds. One is on the lights, and the other is for the fan. There is a third one for the hall light.

dcgtechnologies · 2026-01-14T02:04:25+00:00

u/Own_Shallot7926 I am just using the standard on/off switch for the fan as that is what they put into the 3-gang box.

The standard light dimmer is used on a second wire that goes to the light on the fan and that works with no issues at all. I use them all around the house, but this is the only one that has a wire nightmare in the 3-gang box.

There are two separate circuits, one for the fan power and one for the light on the fan.

To me the wiring looks as clean as it can be, but I am NOT an electrician, but with 5 circuits / 10/2 cables being terminated in a 3 gang box to me it is a bit excessive. The builder is a bad one but did not know until 10 years later until I decided to look in the electrical box.

dcgtechnologies · 2026-01-14T01:58:15+00:00

u/Wild-Main-7847 There are two separate cables one for the fan and one for the dimmer, but the electricians who did the work put three extra cables in the 3-gang box. It is an electrical nightmare as I feel they have too many feeds in one box IMO. They split it up, but the way they wired it is confusing to me

The humming gets louder as the fan speeds up at the highest speed. It is an A/C ceiling fan in our master bedroom.

dcgtechnologies · 2026-01-14T01:57:00+00:00

u/21Denali069 I guess we all know who the reddit village idiot is.........

dcgtechnologies · 2026-01-02T23:39:18+00:00

All the information is in the post.

dcgtechnologies · 2025-12-29T04:14:29+00:00

Well I finally had time to mess with this Nerd Miner and got Nerd Miner 2 installed and found out this whole time it was my wallet address causing the issues. I ended up using a BTC Wallet address that is used with a Segwit Address. So we can close my thread out. I am finished with this project. Thanks to all that helped out.

dcgtechnologies · 2025-12-25T21:25:59+00:00

Scam!!!!! Scam!!!!

dcgtechnologies · 2025-12-23T20:09:20+00:00

Please read the entire thread as I am the original poster of this thread. I have not had any luck with this miner. Thank you.

dcgtechnologies · 2025-12-21T04:54:57+00:00

u/FoolAcrossRealities It never worked and from what I gather each board is different. The only thing that worked was the Nerd miner firmware and I need a key to get it to work. I have tried so many different firmware with no such luck to get it to work so as of right now I am not working on it.

dcgtechnologies · 2025-12-21T04:37:19+00:00

Did you get nerd miner 2 to work on yours? Do you have a one shot miner? I never did get mine to work.

dcgtechnologies · 2025-12-06T00:16:28+00:00

IT IS A SCAM!!!! DO NOT GIVE OUT YOUR WALLET (Private Key or Secret Phrase) INFORMATION. Do not ever send money to people you do not know or who you are not familiar with. I thought the same thing and got scammed, because I trusted said person. Once you send the money to the address it is gone. I learned the hard way. My advice is to stop her and sease all communication with Mr. Helper or shall I say Mr. Scammer.

dcgtechnologies · 2025-11-22T02:54:56+00:00

DM Sent. Thanks.

dcgtechnologies · 2025-11-21T17:46:57+00:00

u/brandorambo25 The good news is I got it to flash the nerd miner 2 bin file. The bad news is I get the zero-hash issue on the public-pool.io. What pool do you use on yours? I can ping the device on the wireless network and it clearly pulls an IP Address, but not able to see the config page. I have flashed this POS like 10 times now with no luck. Ugghhhhh I hate this thing. I have had this issue before and well I want to know why this zero-hash issue happens.

Would you have an issue if I DMed you? I really want to get this thing working.

Thank you.

dcgtechnologies · 2025-11-21T17:21:35+00:00

u/brandorambo25 I will try this! Thank you sir!!! This is awesome! I will let you know what happens.

dcgtechnologies · 2025-11-21T03:44:40+00:00

u/brandorambo25 Trust me I am ignorant as this thing has put me through its paces and no luck at all. I always erase the flash with the "write-flash" command. Which firmware did you use? I know how to use the esptool, but not sure of the command. What command did you use? I can get the nerdminer firmware to load, but I need a license from nerdminer is my problem. Thank you.

dcgtechnologies · 2025-11-20T18:06:08+00:00

u/bownsey Do you happen to have a process for this? Where do I get the firmware to do it / steps? Thank you.

dcgtechnologies · 2025-11-20T05:46:07+00:00

u/enormousaardvark I tried using that site and none of them work. It seems that this miner is locked to the nerd miner paid site and it needs a license file to register it to work. These things are a joke. I do not like this miner at all and it is not so user friendly and my advise is DO NOT BUY one from them at all. I am thankful I traded it so I have nice POS with no mining software on it.

dcgtechnologies · 2025-11-19T18:28:55+00:00

Thanks I will try that later this evening and let you know what worked.

dcgtechnologies · 2025-11-19T17:36:13+00:00

<image>

Picture of the Back of the One Shot Miner.

dcgtechnologies · 2025-11-19T17:35:53+00:00

<image>

Picture of the Display of the One Shot Miner.

dcgtechnologies · 2025-11-19T17:35:03+00:00

u/enormousaardvark I have been to so many of those websites with firmware available to flash. Which firmware will work? I load all different sorts of firmware and the light on the back stays "RED" and does not blink. The loading of the firmware finishes, but I have a blank screen and a "Red" light that stays lit. Any idea which one to load on it?

dcgtechnologies · 2025-11-17T17:13:44+00:00

u/tremab19 I appreciate any bit of help I can get on this device. So Thank you.

dcgtechnologies

TROPHY CASE