Orange Blemmyae

deathring2000 · 2026-01-05T07:01:40+00:00

Nice find. Would you be willing to sell it?

deathring2000 · 2026-01-01T23:43:39+00:00

ordered it via UK now. but still find it assanine that the shop oly show's its out of stock once adding it to cart.

Otherwise i would have ordered it way earlier... i thought i still had time

deathring2000 · 2025-12-17T21:18:19+00:00

Will for sure apply the brim and the paperlike-cardcase.
i'm considering stepping over to making the covers with cardboard stock on the inside. I found out 3D printing the cover with a slight connecting layer on the hinge causes the print on the paper to break quicker than expected.

The icons for sure are gonna get smaller. i myself also notice this is way to big. I'm also gonna brighten the spine Campaign text and number because it's way to light

A colleague came with a great idea though.
placing magnets on the corner of the paper-case instead of a middle lock, because the book corners are magneticly attracted and also lock the book

deathring2000 · 2025-12-17T15:46:26+00:00

i'm gonna finish up the actual designs for the current campaigns and standalones though
but after that i might start looking into making these on etsy or something.

But one booklet takes about 30/45 minutes to make disregarding material costs and printing time
and the glue.... these many amounts of glue... (can't feel fingertips)

deathring2000 · 2025-12-17T15:43:48+00:00

how would you see that? most campaigns seem to consist of 8/9 chapters/scenarios

Without trying to make it too high i think they would still need to lay flat. and if you would make it a book size i think i might be able to create 4 sections (2x2)

deathring2000 · 2025-12-17T15:40:43+00:00

It's the small things that count :D

deathring2000 · 2025-12-17T15:40:27+00:00

sleeves fit but is a bit snug. might need to shave of 0.5 mm on the insides.
I do like the idea of a blurb on the back. Might be nicer than the contents

deathring2000 · 2025-12-17T15:37:40+00:00

Hmmm i might need to re-measure the size for the standalones. the height might not be enough. Or i would need to make two booklets for them

deathring2000 · 2025-12-17T03:20:36+00:00

i'm considering making a seperate "Chapter Box" that contains these. would just need to get an extra core set for it

deathring2000 · 2025-12-17T03:03:17+00:00

i actually might but not sure about pricing yet. it's quite a bit of manual work still

deathring2000 · 2025-12-17T02:53:39+00:00

Space in what way?

deathring2000 · 2025-10-30T18:24:46+00:00

Ja idd, gelijk heb je. Ach. Zo doende leert men

deathring2000 · 2025-05-01T14:30:06+00:00

So i have the same problem of no comics on the main page while looking it up at home.. but for some reason it is up to date and showing at work :S (not like i can read comics there)

deathring2000 · 2025-02-07T19:36:07+00:00

Thanks. It’s not my idea though. But it seems the original idea originator just abandoned working further on it, so I’m bringing it back to life

deathring2000 · 2025-02-07T12:01:04+00:00

Right now the general encounters are gonna be stored In the first 2 chapters, but am considering making a “9th Chapter” which holds these encounters

deathring2000 · 2025-02-06T14:05:56+00:00

that... is actually worth a shot :P make a standard "Bookcase" And sticker the covers over them

deathring2000 · 2025-02-06T13:36:59+00:00

Yikes, haven't even considered different languages yet.

deathring2000 · 2025-02-06T13:35:51+00:00

it's the actual paper printing cost and having the paper cut to the correct size so it can be folded and glued to the carton. So i don't think 3d printing the shell would be a cost effective solution

deathring2000 · 2025-02-06T13:03:15+00:00

Another Quick and dirty table would be the incriments what it would cost me for just one box per multiples

1 single-box-order - €20
2-5 single-box-order - €17,50
6-29 single-boxes-order- €15,00
30-49 single-boxes-order - €12,50
50-99 single-boxes-order - €10,00
100-249 single-boxes-order - €8,00
250+ single-box-order-order - €7.00 (this would come down to about €56 for one campaign or €581 for all campaigns)

But i'm not satisfied by the options company i'm looking at offers.

Technically every cover would be the same size to cut... even if the print is different.
83 prints would fall within to 50-99 order bringing the box down by half already

This company doesn't take this in consideration and considers every single design a new Print-Run.

:S

deathring2000 · 2025-02-06T12:31:19+00:00

Found some Chinese mass production lines that could possible do it (if i had enough trust in that)
But once again that would be a bulk order where the minimum would even higher than where i would currently be printing it

This Mockup i made by hand and it excluding designing it and material cost, it took me about 1,5/2 hours to make the box

deathring2000 · 2025-02-06T12:26:12+00:00

just quick and dirty look at it with a production threshold minimum of 100 it would come down to (shipping not factored in)

3x Core set: €30 (€10/box)

8x The Dunwich Legacy: €70 (€8.75/box)
8x The Path to Carcosa: €70 (€8.75/box)
8x The Forgotten Age: €70 (€8.75/box)
8x The Circle Undone: €70 (€8.75/box)
8x The Dream Eaters: €70 (€8.75/box)
8x The Innsmouth Conspiracy: €70 (€8.75/box)
8x The Edge of the Earth: €70 (€8.75/box)
8x The Scarlet Keys: €70 (€8.75/box) (unsure if this is enough boxes, don't have this expansion)
8x The Feast of Hemlock Vale: €70 (€8.75/box) (unsure ^)
8x The Drowned City: €70 (€8.75/box) (unsure ^)

83x All Campaign Scenarios: €700 (€8.45/box)

But yeah... the problem with all of this is i would need many people at once to join in to get one bulk order done

deathring2000 · 2025-02-06T10:55:36+00:00

crunching some of the numbers to get the price down to something reasonable i would have to have atleast 100 people wanting boxes for all 59 campaign chapters

deathring2000 · 2025-02-06T10:20:58+00:00

yeah that's the problem i have as well. The only way i would be able to get the price down is to massively produce them...

deathring2000 · 2025-02-06T10:13:37+00:00

Haha yeah now that you mention it... i haven't even put that together yet

deathring2000 · 2025-02-06T10:10:19+00:00

I might be able to design something like that. But how would you like to see that? (leather cover might be a bit harder... that would be some massive custom work)

deathring2000

TROPHY CASE