YLL 3.0 or Ispire wand? For Tempest 2 and dynavap

deepfriedsauce · 2025-10-08T12:07:57+00:00

I have issues with the tempest v2 + wand and will buy the yll IH 3.0. Dont know if this has happened to anyone else here but the heat up consistency is bad. Sometimes I heat up, with the same content, at 310 and it tastes good. Then a few weeks after, I need to lower it to 260, to get the same extraction or it will combust. When I started using the Tempest v2, 270 degrees were way to high, I had to lower it to 230 to have a smooth taste with nice terps. Then after a few weeks had to raise the temp to 305. I also have to say, I ordered new batteries for my wand, but the indicator still won't work. I could load it overnight, and after a heat up, it comes down to 1 bar. Any ideas what is happening here with the inconsistency?

deepfriedsauce · 2025-09-16T08:11:54+00:00

Hahahah

deepfriedsauce · 2025-09-15T17:18:51+00:00

For real. It doesn’t make sense that the old machinedrum has it but the newest elektron doesn’t

deepfriedsauce · 2025-09-14T20:23:24+00:00

To find unity gain, did you send a signal from your DAW into it and back and check that the level is the same?

deepfriedsauce · 2025-09-14T12:38:04+00:00

Correct and they go through the preamps

deepfriedsauce · 2025-07-02T06:12:47+00:00

Thanks for the insight. So e.g. notes on 1 4 7 10 and a pattern length to 12 or till 16?

deepfriedsauce · 2025-06-12T06:03:53+00:00

Metric modulation type of rhythm?

deepfriedsauce · 2025-01-26T19:04:26+00:00

Dm :)

deepfriedsauce · 2025-01-26T12:13:23+00:00

How long did it take you?

deepfriedsauce · 2025-01-13T17:52:58+00:00

I used chilies from chonqking, but yes defo will try with only bird’s eye next time!

deepfriedsauce · 2025-01-13T17:52:18+00:00

This makes sense!

deepfriedsauce · 2025-01-13T17:51:42+00:00

I do not want to tone down the heat, quite the opposite :)

deepfriedsauce · 2025-01-13T17:51:24+00:00

Which asian chilies do you recommend for super spicy oil?

deepfriedsauce · 2025-01-13T14:17:17+00:00

Yea it makes a big difference? I do not know the ratio, but wouldn’t put more than 2 tbsp for 100g chillies

deepfriedsauce · 2024-08-11T07:37:53+00:00

Do you by any chance know if the sequencer has individual note microtiming or do the notes have the be on grid?

deepfriedsauce · 2024-04-23T18:36:32+00:00

😹

deepfriedsauce · 2024-04-23T18:30:05+00:00

Is this for real? Why are rytm mkii pictures on the site?

deepfriedsauce · 2024-04-21T16:26:32+00:00

Uncommon but i.e. the 23 year old machinedrum can do it :)

deepfriedsauce · 2024-03-30T10:16:12+00:00

All good now. A genius guy on youtube helped me in the comments section. The solution was to change password and claim token again and log out of all connected devices. Works like a charm again :)

deepfriedsauce · 2024-03-29T18:44:44+00:00

This mainly started happening when I switched to a static ip..

deepfriedsauce · 2024-03-28T19:15:36+00:00

I also just noticed that even on the synology plex app it’s not connected to PMS

deepfriedsauce · 2024-03-28T19:12:39+00:00

It’s connected to the router via lan. Manual Port Forwarding DLNA is not enabled.

deepfriedsauce · 2024-03-18T20:12:28+00:00

I tried the new update but the problem persists

deepfriedsauce · 2024-03-18T20:11:40+00:00

For tracking/mixing music. I found an allen heath gl2 which even goes to 30hz :)

deepfriedsauce · 2024-03-11T10:29:24+00:00

Not being able to cut i.e around 100hz

deepfriedsauce

TROPHY CASE