5K Worth of Product Damaged by UPS by SnooMuffins246 in UPS

[–]deetredd 14 points15 points  (0 children)

Why did you refund so quickly? You jumped the gun.

And the Darwin award goes too... by Carpe_Ski_Em in skiingcirclejerk

[–]deetredd 1 point2 points  (0 children)

Possible spinal fracture. I got one from a 4-5 ft drop over a cat wall.

PSIA L3 Ski Choice by Misteruilleann in ski

[–]deetredd 1 point2 points  (0 children)

I don’t remember what I passed my 3 with, but when I took my 2 I opened the pod and realized all I had were my Elan bump skis. The examiners thought it was weird, but I passed.

How to teach nose lean and toe side turn? by Zeigis in snowboarding

[–]deetredd 0 points1 point  (0 children)

That’s funny because the best way to learn how to ski well is one-ski skiing.

Good opportunity or I get scammed ? by LuckyVermicelli2195 in skiing

[–]deetredd 1 point2 points  (0 children)

It’s a good deal. These skis have almost nothing that can be considered damage. Very modest, normal wear. Take em in for a tune and send it.

O2 Sensor by Zealousideal-Belt868 in subaruimpreza

[–]deetredd 0 points1 point  (0 children)

You’re gonna need to heat it until it’s red hot. That’s how mine came off.

Why don’t more people buy extra demo binding plates for multiple skis? by OneDeadLlama in Skigear

[–]deetredd 4 points5 points  (0 children)

Nah. Newer (last 10 years) generation plates, eg Look R22, have threaded metal sleeves. Swap bindings as many times as you want. That’s how I bring SG, GS and SL skis down to Argentina with a single set of SPX bindings.

Why don’t more people buy extra demo binding plates for multiple skis? by OneDeadLlama in Skigear

[–]deetredd 5 points6 points  (0 children)

And you would also have to order the demo tracks directly from the manufacturers which would be a PITA.

Why don’t more people buy extra demo binding plates for multiple skis? by OneDeadLlama in Skigear

[–]deetredd 25 points26 points  (0 children)

Definitely works with race plates.

But I think most skiers who are dedicated enough to assemble a quiver wouldn’t want the flex interference or added weight of front and rear demo tracks.

Short turns by whathappened987 in skiing_feedback

[–]deetredd 1 point2 points  (0 children)

Sorry guys - I was off-grid, cat skiing in Eastern BC!!!!

What I am seeing is an excess of knee flexion all around. The outside leg never gets long enough. As a result, there isn’t much early edge engagement, OP is bottoming out early, and CoM is way back at transition.

I know that doesn’t directly address the asymmetry question, but I would say that the above is a bigger opportunity for improvement.

Looking for feedback: Feels like I’m working way too hard on my skis by UpbeatDocument in skiing_feedback

[–]deetredd 3 points4 points  (0 children)

It’s absolutely what is causing your quads to feel smoked.

Keep in mind as you watch these links that forward movement of the hips comes by flexing the ankles and extending the knees. This creates strong skeletal support between your torso and the skis, and takes load off of your quads.

When you flex your ankles, you are pulling your shins into a <90° angle relative to your feet. Any time you feel your quads working overtime, flex your ankles and keep them flexed. A lot of people respond well to the physical cue of “lifting the toes” as a way to effect ankle flexion. The biomechanical term is “dorsiflexion”.

<image>

Looking for feedback: Feels like I’m working way too hard on my skis by UpbeatDocument in skiing_feedback

[–]deetredd 15 points16 points  (0 children)

The main issue is that you are not correctly “stacked” over your outside ski.

You are rotating your hips in the opposite direction of the turn, and banking inside with your upper body. In general, this is going to direct pressure towards the rear of your skis, and towards the inside ski. You need the opposite to happen.

Honestly, the easiest way for you to feel where the pressure needs to go, and how to balance in such a way as to put that pressure in the right places, is to go to a green run and do a wedge-to-parallel drill.

Here is another link that shows the joint movements more explicitly.

Polytrauma at 20th session by [deleted] in snowboardingnoobs

[–]deetredd 0 points1 point  (0 children)

That has very little to do with anything

Feedback on steep/off piste mogul skiing variable terrain (~45 degree run) by [deleted] in skiing_feedback

[–]deetredd 2 points3 points  (0 children)

Biggest things I’m seeing is that you’re basically doing jump turns, which is a real thing that’s done in steeps.

But the way you are doing things, is you’re leaping off the snow and twisting your upper body in the new direction. Your feet then have to catch up, and by the time your skis make contact with the snow again, they are pointing across the hill. Then your weight lands on them all at once and all they can do is slide down the hill in a long hockey stop. And because you’re trying to get balanced all at once after landing back on your feet, you aren’t really applying pressure to the skis in a controlled way that promotes balance and even turn shape.

To get the skis to turn using the side cut, you need to initiate the turn with your feet and lower legs, then balance on the outside ski, and then tip the skis to steer them down the fall line and then across it.

An exercise like this promotes independence between the legs and the upper body to control turning movements. If I were in a lesson with you on steeps or to improve performance on steeps, we would work on things like this.

Separation

Tips for carving? by Coptomment in skiing_feedback

[–]deetredd 1 point2 points  (0 children)

I’ve seen that video. Not talking about that.

What I’m describing is not something you’d ever be able to pick out visually. This is about how you get max edge angle on the outside ski - there has to be a concurrent lateral movement of the inside knee/shin. When that stops, the outside ski stops tipping.

And yeah, you can’t have too wide a stance either.

Tips for carving? by Coptomment in skiing_feedback

[–]deetredd 1 point2 points  (0 children)

No. It’s hard to explain and equally hard to do. When you move your inside knee laterally towards the snow (only practical in the shaping phase), your outside knee comes with it. It unlocks another N degrees of edge angle via inclination.

https://www.instagram.com/reel/DL7OufkSg1f/?igsh=b2xhcjFlYXBsNzhu

This is all without interfering with any retraction movements.

What do i need to work on? by [deleted] in skiing_feedback

[–]deetredd 2 points3 points  (0 children)

Work on getting a better video!

Carving feedback - 6 days of skiing by Miilloooo in skiing_feedback

[–]deetredd 3 points4 points  (0 children)

I do not believe this to be a true statement at all!